Register your product and get support at www.philips.
1 Important Safety and important notice Trademark notice 4 4 4 2 Your product Feature highlights Playable media Product overview 5 5 5 6 3 Connect Connect video/audio cables Route audio to other devices Connect a USB device Connect network Connect power 7 7 8 9 9 9 4 Get started Prepare the remote control Find the TV input Use the Home menu Navigate the menu Select menu display language Setup network Use Philips EasyLink 9 10 10 10 10 10 10 11 5 Play Play a disc Play from USB device Play video
1 Important Safety and important notice Warning Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health. Copyright notice • Risk of overheating! Never install the product in a • • • • • • confined space. Always leave a space of at least 4 inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod. divx.
Region codes Remote control You can play discs with the following region codes. Region code DVD Countries a q Blu-ray Russia, India C b c d p e Product overview Main unit o n f a b c d e fgh a • g m h l Turn on this product or switch to standby mode. k b Disc compartment c IR sensor • Detect signals from the remote control. Always point the remote control at the IR sensor. j i d Display panel e • Open or close the disc compartment. • Start or resume play. • • Pause play.
/ • h • Refer to the type plate at the back or bottom of the Search backward or forward. • Before you make or change any connections, ensure that product for identification and supply ratings. / • Note Skip to the previous or next title, chapter, or track. all the devices are disconnected from the power outlet. i SUBTITLE • Select a subtitle language on a disc. j AUDIO • Select an audio language or channel on a disc. k Alphanumeric buttons • Select an item to play. • Enter values.
Option 2: Connect to the component video jack Y Pb Pr 2 AUDIO IN Connect the audio cables to: • the AV OUTPUT-L/R jacks on this product. • the AUDIO input jacks on the TV. Tip • The video input jack on the TV might be labeled as A/V IN, VIDEO IN, COMPOSITE or BASEBAND. Route audio to other devices You can route the audio from this product to other devices.
the COAXIAL/DIGITAL input jack on the device. English • Connect analogue stereo system AUDIO IN 1 1 Connect the audio cables to: • the AV OUTPUT-L/Ron this product. • the AUDIO input jacks on the device. Note • Internet access to Philips website for software update may not be allowed, depending on the router you use or the Internet Service Provider’s policy. Contact your Internet Service Provider for more information.
Always follow the instructions in this chapter in sequence. Button Action Move up or down. Move left or right. Prepare the remote control 1 2 3 Press and push the battery compartment to slide it open (see “1” in the illustration). Insert two AAA batteries with correct polarity (+/-) as indicated. Push and slide back the battery compartment (see “3” in the illustration). OK Confirm a selection. Enter numbers.
2 3 Connect this product to the broadband modem or router. Press to display the home menu. Select [Setup] and press OK. Video Setup One-touch standby 1 Press and hold (standby) for more than 3 seconds. » All the connected devices (if the device supports one-touch standby) automatically switch to standby. Network Installation View Network Settings Audio Setup Network Setup Note • Philips does not guarantee interoperability with other HDMI CEC devices.
• HDD (This product can detect only a portable hard disc drive with USB power peak current no more than 500mA.) Note • For BD discs with Java application, availability of the play resume function depends on specific discs. Change video play 1 Play a title. 2 Use the remote control to change the play. 1 Connect a USB device to the (USB) jack of this product. Press , and select [Browse USB], and press OK. » A contents menu is displayed. 2 3 Select a file to play, and press OK.
Display play information 1 During play, press OPTIONS. OPTIONS. » The play options menu is displayed. 2 3 Select [Titles] or [Chapters] in the menu, and press OK. Select the title or chapter number, and press OK. Skip play to a specific time 1 During play, press OPTIONS. » The play options menu is displayed. 2 3 Select [Time Search] in the menu, and press OK. Press the Navigation buttons ( ) to change the time to skip to, and press OK. Zoom in/out 1 During play, press OPTIONS.
Enjoy BONUSVIEW (Applicable only to a disc compatible with the BONUSVIEW or Picture-in-Picture feature) You can instantly view additional content (such as commentaries) in a small screen window. 1 Press OPTIONS . » The play options menu is displayed. 2 Select [PIP Selection] in the menu, and press OK. » The secondary video window is turned on. 3 Select [2nd Audio Lang List] or [2nd Subtitle List] in the menu, and press . 4 Select the language to play, and press OK.
Select [Duration per slide] in the menu, and press OK. Select a duration, and press OK. Select [Slide Animation] in the menu, and press OK. Select a type of animation effect, and press OK. 3 4 5 Play musical slideshow Create a musical slideshow to play simultaneously MP3/WMA music files and JPEG photo files. Play MP3/WMA music MP3/WMA is a type of compressed audio file (files with .mp3, .wma extensions). 1 Insert a disc or USB device that contains the MP3/WMA music.
4 5 Select an option, then press OK. Select a setting, then press OK. • To return to the previous menu, press BACK. • To exit the menu, press . [TV Display] Select a display format: • [4:3 Letterbox] – For 4:3 screen TV: widescreen display with black bars on the top and bottom of the screen. [4:3 Panscan] – For 4:3 screen TV: full-height display with the trimmed sides. [16:9 Widescreen] – For wide-screen TV: display picture at ratio 16:9.
Off • [PCM] - The audio device does not support multi-channel format. Audio is downmixed to two-channel sound. [Bitstream] - Select the original audio to experience Dolby or DTS audio (BD-video special sound effect is disabled). Off Audio Setup Network Setup EasyLink Setup Auto • Auto On Preference Setup Advanced Setup Note • Ensure that the audio format is supported by the disc and the connected audio device (amplifier/receiver). 4 5 Select an option, then press OK.
EasyLink setup Preference setup 1 2 3 1 2 3 Press . Select [Setup], and press OK. Select [EasyLink Setup], and press Video Setup Audio Setup . EasyLink On One Touch Play On One Touch Standby On Network Setup EasyLink Setup Preference Setup Advanced Setup 4 5 Select an option, and press OK. Select a setting, and press OK. • To return to the previous menu, press BACK. • To exit the menu, press .
• Rated discs above the level you set in [Parental Control] require a password to be played. • The ratings are country-dependent. To allow all discs to play, select ‘8’ for DVD-video and BD-Video. Advanced setup 1 2 3 Press . Select [Setup], and press OK. Select [Advanced Setup], and press English Note . • Some discs have ratings printed on them but are not recorded with ratings. This function has no effect on such discs.
» Once software update is complete, this product automatically turns off to standby. Note • When you clear the local storage, previous download of BD-Live bonus contents is no longer available. [DivX® VOD Code] Obtain the DivX® registration code or the deregistration code. Update software via USB 1 Go to www.philips.com/support to check if 2 a Un-zip the download, and make sure that the un-zipped folder is named “UPG”.
Audio • 2 Channel analog output • Audio Front L&R : 2 Vrms (> 1 kohm) • Digital output: 0.5 Vp-p (75 ohm) • Coaxial • HDMI output • Sampling frequency: • MP3: 32 kHz, 44.1 kHz, 48 kHz • WMA: 44.1 kHz, 48 kHz • Constant bit rate: • MP3: 112 kbps - 320 kpbs • WMA: 48 kpbs - 192 kpbs USB • Compatibility: Hi-Speed USB (2.0) • Class support: UMS (USB Mass Storage Class) Main unit • Power supply rating • Russia: 220~230V ~AC, ~50 Hz • Power consumption: 25 W • Power consumption in standby mode: < 0.
No audio output from the loudspeakers of the audio device (home theater /amplifier/receiver). • Ensure that the audio cables are connected to the audio input of the audio device. • Turn on the audio device to its correct audio input source. No sound on HDMI connection. • You may not hear any sound from the HDMI output if the connected device is non-HDCP compliant or only DVI-compatible. No secondary audio output for Picture-in-Picture feature.
Dolby Digital A surround sound system developed by Dolby Laboratories that contains up to six channels of digital audio (front left and right, surround left and right, center and subwoofer.) DTS Digital Theatre Systems. A surround sound system for providing 5.1 channels of discrete digital audio in consumer electronics products and software content. It is not developed by Dolby Digital. H HDCP High-bandwidth Digital Content Protection.
License Texts and Acknowledgements for any open source software used in this Philips product Instructions to obtain source code for this software can be found in the user manual. 1. U-boot # # (C) Copyright 2000 - 2008 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this # project.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code.
3. 4. 5. 6. 7. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in cer tain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded.
If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) 19yy name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w’. This is free software, and you are welcome to redistribute it under certain conditions; type `show c’ for details. The hypothetical commands `show w’ and `show c’ should show the appropriate parts of the General Public License.
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author’s reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program.
1. 2. 3. 4. 5. You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library.
6. 7. 8 Section 6 states terms for distribution of such executables. When a “work that uses the Library” uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law.
8. 9. 10. 11. 12. 13. 14. 15. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.
YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16.
6. WPA Supplicant Copyright (c) 2003-2009, Jouni Malinen and contributors All Rights Reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
the publication and/or website. Unicode may make improvements and/or changes in the product(s) and/or program(s) described in this publication and/or website at any time. If this file has been purchased on magnetic or optical media from Unicode, Inc. the sole and exclusive remedy for any claim will be exchange of the defective media within ninety (90) days of original purchase. EXCEPT AS PROVIDED IN SECTION C.
copyright notice(s) and this permission notice appear in associated documentation, and (c) there is clear notice in each modified Data File or in the Software as well as in the documentation associated with the Data File(s) or Software that the data or software has been modified.
* nor may “OpenSSL” appear in their names without prior written * permission of the OpenSSL Project. * * 6. Redistributions of any form whatsoever must retain the following * acknowledgment: * “This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit (http://www.openssl.
* “This product includes cryptographic software written by * Eric Young (eay@cryptsoft.com)” * The word ‘cryptographic’ can be left out if the rouines from the library * being used are not cryptographic related :-). * 4. If you include any Windows specific code (or a derivative thereof ) from * the apps directory (application code) you must include an acknowledgement: * “This product includes software written by Tim Hudson (tjh@cryptsoft.
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder. 11.
13. Expat Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
SPECIAL, EXEMPL ARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA , OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. If these license terms cause you a real problem, contact the author. */ 16.
Andreas Dilger Dave Martindale Guy Eric Schalnat Paul Schmidt Tim Wegner The PNG Reference Library is supplied “AS IS”. The Contributing Authors and Group 42, Inc. disclaim all warranties, expressed or implied, including, without limitation, the warranties of merchantability and of fitness for any purpose. The Contributing Authors and Group 42, Inc.
English NOTICE SOFTWARE END USER LICENSE AGREEMENT THIS SOFTWARE END USER LICENSE AGREEMENT (“THIS AGREEMENT”) IS A LEGAL AND BINDING AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR ENTITY) AND PHILIPS CONSUMER LIFESTYLE B.V. A DUTCH LIMITED LIABILITY COMPANY, WITH ITS PRINCIPAL OFFICE AT HIGH TECH CAMPUS 37, 5656 AE EINDHOVEN, THE NETHERLANDS AND ITS SUBSIDIARY COMPANIES (INDIVIDUALLY AND COLLECTIVELY “PHILIPS”).
unprotected content. A list of revoked WM-DRM Software is sent to your PC and/or your Device whenever you download a license for Secure Content. Microsoft may, in conjunction with such license, also download revocation lists onto your Device on behalf of Secure Content Owners, which may disable your Device’s ability to copy, store, display, transfer, and/or play Secure Content.
10. NO OTHER WARRANTIES. EXCEPT AS SET FORTH ABOVE, PHILIPS AND ITS LICENSORS DO NOT WARRANT THAT THE SOFTWARE WILL OPERATE ERROR FREE OR UNINTERRUPTED, OR WILL MEET YOUR REQUIREMENTS. YOU ASSUME ALL RESPONSIBILITIES FOR SELECTION OF THE SOFTWARE TO ACHIEVE YOUR INTENDED RESULTS, AND FOR THE INSTALLATION OF, USE OF, AND RESULTS OBTAINED FROM THE SOFTWARE.
© 2010 Koninklijke Philips Electronics N.V. All rights reserved. BDP3100_51_UM_V2.
