Register your product and get support at www.philips.
Important notes for users in U.K. Laser Specification: Mains plug This apparatus is fitted with an approved moulded plug. Should it become necessary to replace the main fuse, this must be replaced with a fuse of same value as indicated on the plug (example 10A). 1. Remove fuse cover and fuse. 2. The replacement fuse must comply with BS1362 and have the A.S.T.A. approval mark. If the fuse is lost, contact your dealer in order to verify the correct type. 3. Refit the fuse cover.
1 Important Safety and important notice Trademark notice 4 4 4 2 Your product Feature highlights Playable media Product overview 5 5 6 6 3 Connect Connect video/audio cables Route audio to other devices Connect a USB device Connect network Connect power 7 7 8 9 9 9 4 Get started Prepare the remote control Find the TV input Use the Home menu Navigate the menu Select a menu display language Set up a network Use Philips EasyLink 9 9 10 10 10 10 10 11 5 Play Play a disc Play from a USB device Play
1 Important Safety and important notice Warning Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health. Copyright notice • Risk of overheating! Never install the product in a • • • • • • confined space. Always leave a space of at least 4 inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod. divx.
Playable media Remote control This product can play: • BD-Video, BD-R/RE2.0 • DVD, DVD-Video, DVD+R/+RW, DVD-R/RW, DVD+R/-R DL (Dual Layer) • Video CD/SVCD • Audio CD, CD-R/CD-RW, MP3 media, WMA media, JPEG files • DivX (Ultra) media • USB flash drive a Region codes e You can play discs with the following region codes.
/ • h • Refer to the type plate at the back or bottom of the Search backward or forward. • Before you make or change any connections, ensure that product for identification and supply ratings. / • Note Skip to the previous or next title, chapter, or track. all the devices are disconnected from the power outlet. i SUBTITLE • Select a subtitle language on a disc. j AUDIO • Select an audio language or channel on a disc. k Alphanumeric buttons • Select an item to play. • Enter values.
Option 2: Connect to the component video jack Pr Pb Y AUDIO IN 1 2 Connect a composite video cable to: • the VIDEO jack on this product. • the VIDEO input jack on the TV. Connect the audio cables to: • the AV OUTPUT-L/R jacks on this product. • the AUDIO input jacks on the TV. Tip • The video input jack on the TV might be labeled as A/V IN, VIDEO IN, COMPOSITE or BASEBAND. Route audio to other devices You can route the audio from this product to other devices.
Connect a coaxial cable (not supplied) to: • the COAXIAL jack on this product. • the COAXIAL/DIGITAL input jack on the device. 1 Connect an analogue stereo system AUDIO IN Connect a network cable (not supplied) to: • the LAN jack on this product. • the LAN jack on the broadband modem or router. English 1 Note • Internet access to Philips website for software update may not be allowed, depending on the router you use or the Internet Service Provider’s policy.
Select a menu display language Note • If this product is connected to a HDMI CEC compliant TV, skip this setting. It switches automatically to the same OSD menu language as per your TV setting (if the language set on TV is supported by this product). Note 1 • If you are not going to use the remote control for a long time, remove the batteries. • Do not mix batteries (old and new or carbon and alkaline, etc.). 2 3 In the Home menu, select [Setup] and press OK. Select [Preference Setup], and press .
Network Installation View Network Settings One-touch standby 1 Press and hold (standby) for more than 3 Audio Setup seconds. » All the connected devices (if the device supports one-touch standby) automatically switch to standby. Network Setup EasyLink Setup Preference Setup Note Advanced Setup • Philips does not guarantee interoperability with other 4 5 6 HDMI CEC devices. Select [Network Setup], and press . Select [Network Installation], and press OK.
Play from a USB device Button Action Pause play. • Press repeatedly to slow forward play frame by frame. Start or resume play. Play or view media files on the following USB devices: • flash drive • memory card reader • HDD (This product can detect only a portable hard disc drive with USB power peak current no more than 500mA.) Stop play. Skip to a previous/next title or chapter. Search fast-backward or fastforward. Press repeatedly to change the search speed.
• To cancel zoom mode, press BACK or OK to display the zoom factor bar, and press the Navigation buttons ( ) until the zoom factor [x1] is selected. Repeat play for a specific section 1 During play, press OPTIONS . » The play options menu is displayed. 2 3 Tip • If the PBC setting is off, the VCD/SVCD skips the menu and starts play from the first title. To display the menu before play, turn on the PBC setting (see “Adjust settings” > [Preference Setup] > [VCD PBC]).
Play BD-video Blu-ray video disc has a larger capacity and supports features such as high-definition videos, multichannel surround sounds, interactive menus and so on. 1 Insert a BD-video disc. 2 Press , select [play Disc] and press OK. 3 Play automatically starts, or select a play option in the menu and press OK. • During play, you can press TOP MENU to display additional information, features or content stored in the disc.
• • • Button Pause play. Start or resume play. Press OPTIONS to access play options, select an option, and press OK. During slideshow play, you may also press to flip a photo horizontally/vertically. If the slideshow stops, press to continue play. Stop play. Select an item to play. / » The play options menu is displayed. 3 4 5 Select [Duration per slide] in the menu, and press OK. Select a duration, and press OK. Select [Slide Animation] in the menu, and press OK.
6 Adjust settings Note • If [4:3 Panscan] you have selected is not supported by the disc, the screen displays in the [4:3 Letterbox] format. Note • If the setup option is grayed out, it means the setting cannot be changed at the current state. Video setup 1 2 3 Press . Select [Setup], and press OK. Select [Video Setup], and press . [HDMI Video] Select an HDMI video output resolution that is compatible with your TV display capability.
[Vivid] – Vibrant color setting. [Cool] - Soft color setting. [Action] – Sharp color setting. It enhances the details in the dark area. Ideal for action movies. [Animation] – Contrast color setting. Ideal for animated pictures. • Audio setup 1 2 3 Press . Select [Setup], and press OK. Select [Audio Setup], and press Video Setup .
4 5 Select an option, then press OK. Select a setting, then press OK. • To return to the previous menu, press BACK. • To exit the menu, press . [Network Installation] Install the network connection. [View Network Settings] Display the information for the current network status. Press . Select [Setup], and press OK. Select [EasyLink Setup], and press Video Setup Audio Setup Note • You must turn on the HDMI CEC operations on the TV/ devices before you can enjoy the EasyLink controls.
• If the language you have set is not available on the disc, the disc uses its own default language. • For some discs, the subtitle/audio language can only be changed from the disc menu. [Parental Control] Restrict access to discs that are unsuitable for children. These types of discs must be recorded with ratings. To access, enter your last set password or ‘0000’. Note • Rated discs above the level you set in [Parental Control] require a password to be played. • The ratings are country-dependent.
• [USB] - Update software from the USB device which is connected to this product. [Network] - Update software from the internet. • Note • For detailed software updating, see “Additional 1 2 3 Update software via network 1 Set up the internet connection (see “Get information” > “Update software”. 2 [Clear Memory] Delete BD-Live data that are automatically downloaded on the connected USB device.
• Wipe the disc with a micro fibre cleaning cloth from the centre to the edge in a straight line movement. Specifications Note • Wave length: • BD: 405 +5nm/-5nm • DVD: 655 +10nm/-10nm • CD: 790 +10nm/-20nm Output power: • BD: Max. ratings: 20mW • DVD: Max. ratings: 6mW • CD: Max.
Sound No audio output from the TV. • Ensure that the audio cables are connected to the audio input of the TV. • Assign the audio input of the TV to the corresponding video input. See the TV user manual for details. No audio output from the loudspeakers of the audio device (home theater /amplifier/receiver). • Ensure that the audio cables are connected to the audio input of the audio device. • Turn on the audio device to its correct audio input source. No sound on HDMI connection.
Digital Audio Digital Audio is a sound signal that has been converted into numerical values. Digital sound can be transmitted through multiple channels. Analogue sound can only be transmitted through two channels. DivX Video-On-Demand This DivX Certified ® device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.
English NOTICE SOFTWARE END USER LICENSE AGREEMENT THIS SOFTWARE END USER LICENSE AGREEMENT (“THIS AGREEMENT”) IS A LEGAL AND BINDING AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR ENTITY) AND PHILIPS CONSUMER LIFESTYLE B.V. A DUTCH LIMITED LIABILITY COMPANY, WITH ITS PRINCIPAL OFFICE AT HIGH TECH CAMPUS 37, 5656 AE EINDHOVEN, THE NETHERLANDS AND ITS SUBSIDIARY COMPANIES (INDIVIDUALLY AND COLLECTIVELY “PHILIPS”).
the upgrade, you will not be able to access Secure Content that requires the WM-DRM Upgrade; however, you will still be able to access unprotected content and Secure Content that does not require the upgrade. WM-DRM features that access the Internet, such as acquiring new licenses and/or performing a required WM-DRM Upgrade, can be switched off. When these features are switched off, you will still be able to play Secure Content if you have a valid license for such content already stored on your Device.
11. LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES WILL PHILIPS OR ITS LICENSORS BE LIABLE FOR ANY CONSEQUENTIAL, SPECIAL, INDIRECT, INCIDENTAL OR PUNITIVE DAMAGES WHATSOEVER, INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS OR REVENUES, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, LOSS OF DATA, LOSS OF USE OR OTHER PECUNIARY LOSS, EVEN IF PHILIPS OR ITS LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
License Texts and Acknowledgements for any open source software used in this Philips product Instructions to obtain source code for this software can be found in the user manual. 1. U-boot # # (C) Copyright 2000 - 2008 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this # project.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code.
3. 4. 5. 6. 7. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in cer tain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded.
If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) 19yy name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w’. This is free software, and you are welcome to redistribute it under certain conditions; type `show c’ for details. The hypothetical commands `show w’ and `show c’ should show the appropriate parts of the General Public License.
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author’s reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program.
1. 2. 3. 4. 5. You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library.
6. 7. 8 Section 6 states terms for distribution of such executables. When a “work that uses the Library” uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law.
8. 9. 10. 11. 12. 13. 14. 15. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.
YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16.
6. WPA Supplicant Copyright (c) 2003-2009, Jouni Malinen and contributors All Rights Reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
the publication and/or website. Unicode may make improvements and/or changes in the product(s) and/or program(s) described in this publication and/or website at any time. If this file has been purchased on magnetic or optical media from Unicode, Inc. the sole and exclusive remedy for any claim will be exchange of the defective media within ninety (90) days of original purchase. EXCEPT AS PROVIDED IN SECTION C.
copyright notice(s) and this permission notice appear in associated documentation, and (c) there is clear notice in each modified Data File or in the Software as well as in the documentation associated with the Data File(s) or Software that the data or software has been modified.
* nor may “OpenSSL” appear in their names without prior written * permission of the OpenSSL Project. * * 6. Redistributions of any form whatsoever must retain the following * acknowledgment: * “This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit (http://www.openssl.
* “This product includes cryptographic software written by * Eric Young (eay@cryptsoft.com)” * The word ‘cryptographic’ can be left out if the rouines from the library * being used are not cryptographic related :-). * 4. If you include any Windows specific code (or a derivative thereof ) from * the apps directory (application code) you must include an acknowledgement: * “This product includes software written by Tim Hudson (tjh@cryptsoft.
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder. 11.
13. Expat Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
SPECIAL, EXEMPL ARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA , OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. If these license terms cause you a real problem, contact the author. */ 16.
Guy Eric Schalnat Paul Schmidt Tim Wegner The PNG Reference Library is supplied “AS IS”. The Contributing Authors and Group 42, Inc. disclaim all warranties, expressed or implied, including, without limitation, the warranties of merchantability and of fitness for any purpose. The Contributing Authors and Group 42, Inc.
© 2010 Koninklijke Philips Electronics N.V. All rights reserved. BDP3100_05_UM_V3.
