User manual
21
Note
'RQRWWXUQRIIWKHSRZHURUUHPRYHWKH86%ÁDVK
drive when software updating is in progress to prevent
possible damage of this product.
Care
Caution
Never use solvents such as benzene, thinner, cleaners
available commercially, or anti-static sprays intended
for discs.
Clean discs
:LSHWKHGLVFZLWKDPLFURÀEUHFOHDQLQJFORWKIURP
the centre to the edge in a straight line movement.
6SHFLÀFDWLRQV
Note
6SHFLÀFDWLRQDQGGHVLJQDUHVXEMHFWWRFKDQJHZLWKRXW
notice
Play media
BD-Video, DVD-Video, DVD+R/+RW, DVD-
R/-RW, DVD+R/-R DL, CD-R/CD-RW, Audio
CD, Video CD/SVCD, Picture CD, MP3-CD,
:0$&''LY;8OWUD&'
Accessories supplied
Remote control and batteries
Audio/Video cables
HDMI cable
Power cable
Quick start guide
User manual
Video
Signal system: PAL / NTSC
&RPSRVLWHYLGHRRXWSXW9SSRKP
Component video output: 480/576i, 480/576p,
720p, 1080i
<9SSRKP
3E9SSRKP
3U9SSRKP
HDMI output 480p, 576p, 720p, 1080i, 1080p,
1080p24
Audio
2 Channel analog output
$XGLR)URQW/59UPV!NRKP
'LJLWDORXWSXW9SSRKP
Coaxial
7 Additional Information
Update software
For software updates to enchance performance,
check the current software version of this product to
FRPSDUHZLWKWKHODWHVWVRIWZDUHLIDYDLODEOHDWWKH
Philips website.
1 Press .
2 Select [Settings], then press OK.
3 Select [Advanced Setup] > [Version Info.],
then press OK.
Update software via network
1
6HWXSWKHQHWZRUNFRQQHFWLRQVHH´*HW
VWDUWHG·!´6HWXSQHWZRUNµ
2 In the Home menu, select [Settings] >
[Advanced Setup] > [Software Download] >
[Network].
You are prompted to start upgrading »
processs if upgrade media is detected.
3 Follow the instructions on the TV screen to
FRQÀUPXSGDWHRSHUDWLRQ
Once software update is complete, this »
product automatically turns off to standby.
4 Disconnect the power cord for a few seconds
and connect again to turn on this product.
Update software via USB
1
Go to www.philips.com/support to check if
the latest software version is available for this
product.
2 'RZQORDGWKHVRIWZDUHLQWRD86%ÁDVKGULYH
a Un-zip the download, and make sure that
the un-zipped folder is named “UPG”.
b Put the “UPG” folder in the root
directory.
3 ,QVHUWWKH86%ÁDVKGULYHWRWKHUSB jack of
the rear panel.
4 In the Home menu, select [Settings] >
[Advanced Setup] > [Software Download] >
[USB].
5 Follow the instructions on the TV screen to
FRQÀUPXSGDWHRSHUDWLRQ
Once software update is complete, this »
product automatically turns off to standby.
6 Disconnect the power cord for a few seconds
and connect again to turn on this product.
English
EN










