User manual

8
Route audio to other devices
You can route the audio from this player to other
devices.
Connect to an HDMI-compliant AV
receiver/amplifier
1 Connect an HDMI cable (not supplied) to:
the • HDMI jack on this player.
the HDMI jack input jack on the device.•
Tip
The HDMI connection provides best audio quality. •
Connect to a digital AV amplifier/receiver
Connect to coaxial jack
1 Connect a coaxial cable (not supplied) to:
the • COAXIAL jack on this player.
the COAXIAL/DIGITAL input jack on •
the device.
HDMI IN
COAXIAL
Tip
If the TV has a DVI connector only, connect via an •
HDMI/DVI adaptor. Connect an audio cable for sound
output.
If there is a blank screen under HDMI connection, on the
•
remote control press and then press “731” (numeric
buttons) to recover picture display.
If this player connects to a TV compatible with 1080p
•
or 1080p/24Hz, Philips recommends HDMI category
2 cable, also known as High Speed HDMI cable, for
optimal video and audio output.
To play the digital video images of a BD-video or DVD-
•
video via an HDMI connection, it is necessary that both
this player and the display device (or an AV receiver/
amplifier) support a copyright protection system called
HDCP (high-bandwidth digital content protection
system).
This connection provides best picture quality.
•
Option 2: Connect to the composite
video jack
1 Connect a composite video cable to:
the • VIDEO (CVBS) jack on this player.
the VIDEO input jack on the TV.•
2 Connect the audio cables to:
the • AUDIO OUT jacks on this player.
the AUDIO input jacks on the TV.•
Tip
The video input jack on the TV might be labeled as A/V •
IN, VIDEO IN, COMPOSITE or BASEBAND.
VIDEO IN
AUDIO IN
EN