User manual

Tip
Use this product’s DivX registration code when you rent or purchase video from www.divx.com/vod. •
The DivX videos rented or purchased through the DivX® VOD (Video On Demand) service can be
played only on the device to which it is registered.
[Version Info.]
Display the software version and the MAC address of this product.
Tip
This information is needed for you to check if a latest software version is available at the Philips •
website so that you can download and install on this product.
[Restore Default Settings]
Reset all the settings of this product to the factory settings, except for [Parental Control] setting.
7 Additional Information
Update software
For software updates to enchance performance, check the current software version of this product to
compare with the latest software (if available) at the Philips website.
1 Press .
2 Select [Settings], then press OK.
3 Select [Advanced Setup] > [Version Info.], then press OK.
Update software via USB
1 Go to www.philips.com/support to check if the latest software version is available for this
product.
2 Download the software onto a USB flash drive.
a Un-zip the download, and make sure that the un-zipped folder is named “UPG”.
b Put the “UPG” folder in the root directory.
3 Insert the USB flash drive to the USB jack of the rear panel.
4 In the Home menu, select [Settings] > [Advanced Setup] > [Software Download] > [USB].
5 Follow the instructions on the TV screen to confirm update operation.
Once software update is complete, this product automatically turns off to standby. »
6 Disconnect the power cord for a few seconds and connect again to turn on this product.