User manual

The TV (if supports one-touch play) automatically turns on and switches to the correct »
video-in channel.
If a disc is loaded in this product, disc play automatically starts. »
One-touch standby
1 Press and hold the STANDBY button on the remote control for more than 3 seconds.
All the connected devices (if the device supports one-touch standby) automatically switch »
to standby.
Note
Philips does not guarantee 100% interoperability with all HDMI CEC devices. •
5 Play
Play a disc
Caution
Do not place any objects other than discs into the disc compar tment. •
Do not touch the disc optical lens inside the disc compartment. •
1 Press to open the disc compartment.
2 Insert a disc with its label facing up.
3 Press to close the disc compar tment and start disc play.
To view disc play, turn on the TV to the correct viewing channel for this product.•
To stop disc play, press•
.
Note
Check disc/file formats supported (see “Your product” > “Playable media”). •
If the password entry menu is displayed, enter the password before you can play the locked or •
restricted disc (see “Adjust settings” > “Preference Setup” > [Parental Control]).
If you pause or stop a disc, the screen saver appears after 10 minutes of inactivity. To deactivate the
•
screen saver, press any button.
After you pause or stop a disc and no button is pressed within 30 minutes, this product automatically
•
switches to standby.