BDM3270QP www.philips.
Table of Contents 1. Important ...............................................1 1.1 Safety precautions and maintenance .1 1.2 Notational Descriptions ............................2 1.3 Disposal of product and packing material ...............................................................3 2. Setting up the monitor .......................4 2.1 2.2 2.3 2.4 Installation .........................................................4 Operating the monitor ..............................6 MultiView .................
1. Important Please use approved power cord provided by Philips all the time. If your power cord is missing, please contact with your local service center. (Please refer to Customer &DUH &RQVXPHU ,QIRUPDWLRQ &HQWHU 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user manual before you use your monitor. It contains important information and notes regarding operating your monitor.
1. Important Temperature: 0-40°C 32-95°F 1.2 Notational Descriptions Humidity: 20-80% RH The following subsections describe notational conventions used in this document. Important information for Burn-in/Ghost image Notes, Cautions and Warnings Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content.
1. Important making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national take-back initiatives and recycling programs whenever possible, preferably in cooperation with competitors, which recycle all materials (products and related SDFNDJLQJ PDWHULDO LQ DFFRUGDQFH ZLWK DOO Environmental Laws and taking back program with the contractor company. 1.
2. Setting up the monitor Install the base 2. Setting up the monitor 1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen. 2.1 Installation Package contents BDM3270QP 使用 in k l © 20 14 Kon 2. Hold the neck with both hands. *HQWO\ DWWDFK WKH QHFN WR WKH 9(6$ mount area until the latch locks the neck. 前请阅读使用说明 User’s Manual Monitor drivers SmartControl software 保留备用 ijke P h il ip s ll r .A N .
2. Setting up the monitor Connect to PC Connecting to your PC 1. Connect the power cord to the back of WKH PRQLWRU ÀUPO\ 2. Turn off your computer and unplug its power cable. 12 11 10 3. Connect the monitor signal cable to the video connector on the back of your computer. 1 8 9 4. Plug the power cord of your computer and your monitor into a nearby outlet. 7 6 5 4 3 5. Turn on your computer and monitor. If the monitor displays an image, installation is complete.
2. Setting up the monitor Customize your own “USER” key 2.2 Operating the monitor This hot key allows you to setup your favorite function key. Description of the control buttons 1. Press button on the front bezel to enter OSD Menu Screen. /DQJXDJH 26' 6HWWLQJV 6HWXS +RUL]RQWDO ,QSXW 9HUWLFDO $XGLR 6RXUFH 7UDQVSDUHQF\ 9ROXPH 26' 7LPH RXW 8VHU 3 7 6 5 4 2 2. 3UHVV ɼ RU ɾ EXWWRQ WR VHOHFW PDLQ PHQX [OSD Settings], then press button. 1 3.
2. Setting up the monitor Description of the On Screen Display Audio Source What is On-Screen Display (OSD)? Audio In 2Q 6FUHHQ 'LVSOD\ 26' LV D IHDWXUH LQ DOO Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
2. Setting up the monitor The OSD Menu 5HVROXWLRQ QRWLÀFDWLRQ Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on.
2. Setting up the monitor Pivot 2.3 MultiView What is it? Multiview enables active dual connect and view so that you can work with multiple devices like PC and Notebook side-by-side simultaneously, making complex multi-tasking work a breeze. Why do I need it? With the ultra high resolution Philips MultiView display, you can experience a world of connectivity in a comfortable way in the RIÀFH RU DW KRPH :LWK WKLV GLVSOD\ \RX FDQ conveniently enjoy multiple content sources at one screen.
2. Setting up the monitor How to enable MultiView by hotkey? 1. Press the hotkey front bezel. 3UHVV ɼ RU ɾ EXWWRQ WR VHOHFW PDLQ PHQX button. [PIP / PBP], then press directly on the 3UHVV ɼ RU ɾ EXWWRQ WR VHOHFW >PIP / PBP button. Mode], then press 3UHVV ɼ RU ɾ EXWWRQ WR VHOHFW >PIP] or [PBP]. Now you can move backward to set the [PIP / PBP Input], [PIP Size], [PIP Position]., or [Swap]. 2.
2. Setting up the monitor PIP / PBP Input: There are four different video input to choose as the sub display source: [DVI], [MHL-HDMI], and [DisplayPort]. Please refer below table for compatibility of main/sub input source. MAIN SOURCE (xl) Swap: The main picture source and the sub picture source swapped on the display.
2. Setting up the monitor Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. 2.4 Remove the Base Assembly for VESA Mounting Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 100mm 1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen. 100mm 2. Loosen the assembly screws, then detach the neck from the monitor.
2. Setting up the monitor 2.5 0+/ 0RELOH +LJK 'HÀQLWLRQ Link) introduction What is it? 0RELOH +LJK 'HÀQLWLRQ /LQN 0+/ LV D PRELOH audio/video interface for directly connecting mobile phones and other portable devices to KLJK GHÀQLWLRQ GLVSOD\V MHL-HDMI MHL An optional MHL cable allows you to simply connect your MHL capable mobile device to this large Philips MHL display, and watch your HD videos come to life with full digital sound.
3. Image Optimization 3. The SmartImage on screen display will remain on screen for 5 seconds, or you can DOVR SUHVV 2. WR PDNH FRQÀUPDWLRQ 7KHUH DUH VHYHQ PRGHV WR VHOHFW 2IÀFH 3KRWR Movie, Game, Economy, SmartUniformity and Off. 3. Image Optimization 3.1 SmartImage What is it? SmartImage provides presets that optimize display for different types of content, dynamically adjusting brightness, contrast, color and sharpness in real time.
3. Image Optimization v (FRQRP\ Under this profile, brightness, contrast are adjusted and backlighting finetuned for just right display of everyday office applications and lower power consumption. 3.3 Philips SmartControl Premium The new SmartControl Premium software by Philips allows you to control your monitor via an easy to use on-screen graphic interface.
3. Image Optimization You can adjust more options without wizard by Standard pane. Start with Standard pane Adjust menu Adjust Menu allows you to adjust Brightness, Contrast, and Resolution. You can follow the instruction and do the adjustment. Cancel prompts user if you want to cancel installation. Color menu Color Menu allows you to adjust RGB, Black Level, White Point, Display Gamma, Calibration, SmartImage, and SmartKolor. You can follow the instruction and do the adjustment.
3. Image Optimization 1. "Show Me" starts color calibration tutorial. 2. Start - starts the 6-step color calibration sequence. 3. Quick View loads the before/after images. 4. To return to Color home pane, click the Cancel button. 5. Enable color calibration - by default is on. If unchecked, does not allow for color calibration to happen, dimes out start and quick view buttons. 6. Must have patent info in calibration screen.
3. Image Optimization First Color Calibration Screen Eco Power menu Previous button is disabled until the second color screen. Next goes to the succeeding target WDUJHWV Final next goes File > Presets pane. Options menu Cancel closes the UI and returns to the plug in page. Options>Preferences - Will only be active when selecting Preferences from the dropdown Options menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available.
3. Image Optimization Option>Auto Pivot. menu. Disabled removes SmartControl Premium from the right click context menu. (QDEOH 7DVN 7UD\ LFRQ LV FKHFNHG 2Q E\ default. Enable context menu shows the task tray menu for SmartControl Premium. A right click on the task tray icon displays the menu options for Help, Technical Support. Check for Update, About, and Exit. When Enable task tray menu is disabled, the task tray icon will only display Exit.
3. Image Optimization Options>MultiView - Allow users to view content from multiple sources when in PIP and PBP mode. 2SWLRQV!7KHIW 'HWHUUHQFH - Theft Deterrence Pane will only be active when selecting Theft Deterrence Mode from the drop-down Plug-in menu. Click the red button to select a MultiView mode. To enable Theft Deterrence, click on On button to bring up the following screen: PIP mode Select Size, Location, Input, and Audio. User can enter PIN between 4 and 9 digits numbers only.
3. Image Optimization Help menu +HOS!8VHU 0DQXDO - Will only be active when selecting User Manual from the drop-down Help menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. PBP mode Select Input and Audio. Help>Version - Will only be active when selecting Version from the drop- down Help menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available.
3. Image Optimization checked in the Options>Preferences pane, then the menu will be visible. v Help - Access to User Manual file: Open User Manual file using the default browser window. v 7HFKQLFDO 6XSSRUW - Displays the tech support page. v ChecN IRU 8SGDWH - Takes the user to PDI Landing and checks the user’s version against the most current available. v About - Displays detailed reference information: product version, release information, and product name.
3. Image Optimization Drag and Drop Windows 3.4 SmartDesktop Guide 2QFH WKH SDUWLWLRQV DUH FRQÀJXUHG DQG $OLJQ WR partition is selected a window can be dragged into the region and it will automatically align. When the window and mouse cursor are within the region, the region will become highlighted. SmartDesktop SmartDesktop is in SmartControl Premium. Install SmartControl Premium and select SmartDesktop from Options.
3. Image Optimization 3. Identify Partition – Displays the outline grid on the desktop for the current partition. and easy way to manage the desktop as well as sending any window to any partition without having to drag and drop. Move the cursor into the active window’s title bar to access the drop down menu. 4. Align On/Align Off – Enables/disables the drag and drop auto align feature. 5. Exit – Closes Desktop Partition and Display Tune.
3. Image Optimization Task Tray Right Click The task tray also contains most of the features supported in the title bar (with the exception of automatically sending a window to any SDUWLWLRQ Find Windows – In some cases, the user may have sent multiple windows to the same partition. Find Window will show all open windows and move the selected window to the forefront.
3. Image Optimization 6PDUW'HVNWRS 3DUWLWLRQ 'HÀQLWLRQV Name Description Image Full Desktop Applies all settings to the entire desktop. Vertical Assesses the screen resolution and divides the display into two evenly sized vertical regions. )RU PDLQWDLQ YHUWLFDO FRQÀJXUDWLRQ Horizontal Assesses the screen resolution and divides the display into two evenly sized horizontal regions.
3. Image Optimization Name Description Image Horizontal Split Top Assesses the screen resolution and divides the display into two evenly sized horizontal regions, the top region is single, the bottom region is spilt into two evenly sized regions For 90 Partition 1 on right side Vertical Partition 2&3 on left side Vertical. For 270 Partition 1 on left side Vertical Partition 2&3 on right side Vertical.
7HFKQLFDO 6SHFLÀFDWLRQV 4.
7HFKQLFDO 6SHFLÀFDWLRQV Stand Tilt Swivel Height adjustment Pivot Power On Mode 6OHHS 6WDQGE\ Off 2II $& VZLWFK 2Q 0RGH (&2 PRGH Power(EnergyStar test method) Energy Consumption Normal Operation 6OHHS 6WDQGE\ Off 2II $& VZLWFK Heat Dissipation* Normal Operation 6OHHS 6WDQGE\ Off 2II $& VZLWFK Power LED indicator Power Supply Dimensions 3URGXFW ZLWK VWDQG :[+[' Product without stand :[+[' Weight Product with stand Product without stand Product with packaging Operating Condition 7HPSHUDWXUH UDQ
7HFKQLFDO 6SHFLÀFDWLRQV Environmental and energy ROHS EPEAT Packaging 6SHFLÀF 6XEVWDQFHV EnergyStar Compliance and standards YES Gold (www.epeat.net 100% recyclable 100% PVC BFR free housing YES Regulatory Approvals CE Mark, FCC Class B, SEMKO, cETLus, CU-EAC, TCO Edge, EPA, PSB, WEEE, CCC, CECP, PSE, KC, BSMI, VCCI Cabinet Color Finish Black Texture Note 1. EPEAT Gold or Silver is valid only where Philips registers the product. Please visit www.epeat.net for registration status in your country.
7HFKQLFDO 6SHFLÀFDWLRQV The highest supporting screen resolution on HDMI is 2560 x 1440, but it always depends on your capability of graphics card and BluRay/video players. 4.1 Resolution & Preset Modes Maximum Resolution [ # +] DQDORJ LQSXW [ # +] GLJLWDO LQSXW Recommended Resolution 4.2 Crystalclear [ # +] GLJLWDO LQSXW This latest Philips display delivers Crystalclear, 2560x1440 images.
5. Power Management 5. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
6. Regulatory Infomation 6.
6. Regulatory Infomation Lead-free Product CE Declaration of Conformity Lead free display promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment. Toxic substances like Lead has been eliminated and compliance with European community’s stringent RoHs directive mandating restrictions on hazardous substances in electrical and electronic equipment have been adhered to in order to make Philips monitors safe to use throughout its life cycle.
6. Regulatory Infomation prEN50279:1998 (Low Frequency Electric DQG 0DJQHWLF ILHOGV IRU 9LVXDO 'LVSOD\ Increase the separation between the equipment and receiver. MPR-II (MPR:1990:8/1990:10 Low )UHTXHQF\ (OHFWULF DQG 0DJQHWLF ILHOGV Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
6. Regulatory Infomation EN 55022 Compliance (Czech Republic Only) interférences nuisibles dans le cadre d'une installation résidentielle. CET appareil produit, utilise et peut émettre des hyperfréquences qui, si l'appareil n'est pas installé et utilisé selon les consignes données, peuvent causer des interférences nuisibles aux communications radio. Cependant, rien ne peut garantir l'absence d'interférences dans le cadre d'une installation particulière.
6. Regulatory Infomation North Europe (Nordic Countries) Information Ergonomie Hinweis (nur Deutschland) Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden durch Röntgenstrahlen" festgelegten Vorschriften.
6. Regulatory Infomation China RoHS EU Energy Label The People's Republic of China released a regulation called "Management Methods for Controlling Pollution by Electronic Information Products" or commonly referred to as China RoHS. All products produced and sold for China market have to meet China RoHS request.
6. Regulatory Infomation your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment . The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling in India please visit the below web link.
7. Customer care and warranty black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 7. Customer care and warranty Types of Pixel Defects Pixel and sub pixel defects appear on the screen in different ways. There are two categories of pixel defects and several types of sub pixel defects within each category. 7.1 Philips’ Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products.
7. Customer care and warranty Proximity of Pixel Defects Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots. Because pixel and sub pixels defects of the same type that are near to one another may be PRUH QRWLFHDEOH 3KLOLSV DOVR VSHFLÀHV WROHUDQFHV for the proximity of pixel defects. Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or 'off'.
7. Customer care and warranty 7.2 Customer Care & Warranty For warranty coverage information and additional support requirement valid for your region, please visit www.philips.com/support website for details. You may also contact your local Philips Customer Care Center number listed below. Contact Information for WESTERN EUROPE region: Country CSP +RWOLQH 1XPEHU Price 2SHQLQJ +RXUV Austria RTS +43 0810 000206 € 0.07 Mon to Fri : 9am - 6pm Belgium Ecare +32 078 250851 € 0.
7. Customer care and warranty Contact Information for CENTRAL AND EASTERN EUROPE region: Country &DOO FHQWHU CSP &RQVXPHU FDUH QXPEHU Belarus NA IBA +375 17 217 3386 +375 17 217 3389 Bulgaria NA LAN Service +359 2 960 2360 Croatia NA MR Service Ltd +385 (01) 640 1111 Czech Rep.
7. Customer care and warranty Contact Information for APMEA region: Country Australia ASP AGOS NETWORK PTY LTD &RQVXPHU FDUH QXPEHU 2SHQLQJ KRXUV 1300 360 386 Mon.~Fri. 9:00am-5:30pm New Zealand Visual Group Ltd. 0800 657447 Mon.~Fri. 8:30am-5:30pm Hong Kong Macau Company: Smart Pixels Technology Ltd. Hong Kong: Tel: +852 2619 9639 Macau:Tel: (853)-0800-987 Mon.~Fri. 9:00am-6:00pm Sat. 9:00am-1:00pm India REDINGTON INDIA LTD Tel: 1 800 425 6396 SMS: PHILIPS to 56677 Mon.~Fri.
8. Troubleshooting & FAQs satisfactory, you can do manual adjustments via the OSD menu. 8. Troubleshooting & FAQs Note The Auto Function is not applicable in DVIDigital mode as it is not necessary. 8.1 Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.
8. Troubleshooting & FAQs The "power on" light is too strong and is disturbing Eliminate the vertical bars using the Phase/ Clock of Setup in OSD Main Controls. It is valid only in VGA mode. You can adjust “power on” light using the power LED Setup in OSD main Controls. For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative. Image appears blurred, indistinct or too dark Adjust the contrast and brightness on On-Screen Display.
8. Troubleshooting & FAQs Q3. After installing SmartControl Premium, when clicking on SmartControl Premium tab, nothing shows up after a while or a failure message shows, what happened? 8.3 General FAQs Q1: When I install my monitor what should I do if the screen shows 'Cannot display this video mode'? It might be your graphic adaptor is not compatible with the SmartControl Premium.
8. Troubleshooting & FAQs and 11500K. With settings in the 5000K range the panel appears "warm, with a red-white color tone", while a 11500K temperature yields "cool, bluewhite toning". package. Monitor drivers (.inf and .icm ÀOHV ZLOO EH LQVWDOOHG DXWRPDWLFDOO\ Q4: How do I adjust the resolution? Ans.: Your video card/graphic driver and monitor together determine the available resolutions. You can select the desired resolution under Windows® Control Panel with the "Display properties".
8. Troubleshooting & FAQs your screen. "Burn-in", "after-imaging", or "ghost imaging" is a well-known phenomenon in LCD panel technology. In most cases, the "burned in" or "atter-imaging" or "ghost imaging" will disappear gradually over a period of time after the power has been switched off. Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content. 8.
© 2014 Koninklijke Philips N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.
