BDL5530EL www.philips.
User Manual BDL5530EL SAFETY AND TROUBLESHOOTING INFORMATION Safety precautions and maintenance WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards. Read and follow these instructions when connecting and using your display: Operation: • Keep the display out of direct sunlight and away from stoves or any other heat sources.
User Manual BDL5530EL Service: • The casing cover should be opened only by qualified service personnel. • If there is any need for repair or integration, please contact your local service center. • Do not leave your display under direct sunlight. If your display does not operate normally, having followed the instructions set out in this document, please contact a technician or your local service center.
User Manual BDL5530EL REGULATORY INFORMATION CE DECLARATION OF CONFORMITY MMD declares under our responsibility that the product is in conformity with the following standards • EN60950-1:2006+A11:2009 (Safety requirement of Information Technology Equipment) • EN55022:2006+A1:2007 (Radio Disturbance requirement of Information Technology Equipment) • EN55024:1998+A1:2001+A2:2003 (Immunity requirement of Information Technology Equipment) • EN61000-3-2:2006 (Limits for Harmonic Current Emission) • EN61000-3-3:
User Manual BDL5530EL POLISH CENTER FOR TESTING AND CERTIFICATION NOTICE The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computers, monitors, printers and so on) should have the same power supply source. The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 Amperes (A).
User Manual BDL5530EL INFORMATION FOR UK ONLY WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse. 2. Fit new fuse which should be a BS 1362 5A, A.S.T.A. or BSI approved type. 3. Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate 3-pin plug fitted in its place.
User Manual BDL5530EL 中国电子信息产品污染控制表示要求 ( 中国 RoHS 法规标示要求 ) 产品中有毒有害物质或元素 的名称及含量 部件名称 外壳 液晶面板 电路板组件 附件 ( 遥控器，电源线，连接线 ) 遥控器电池 有毒有害物质或元素 六价铬 镉 多溴联苯 + (Cd) (PBB) (Cr 6 ) O O O O O O O O O 铅 (Pb) O X X 汞 (Hg) O X O X O O O O O X O O O O O 多溴二苯醚 (PBDE) O O O O：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下。 X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006 标准规定的限量要求。 环保使用期限 此标识指期限 ( 十年 )，电子信息产品中含有的有毒有害物质或元素在正常使用的条件下不会发生外泄或突变， 电子信息产品用户使用该电子信息产品不会对环境造成严重污染或对其人身、财产造成严重损害的期限。 《废弃电器电子产品回收处理管理条例》提示性
User Manual BDL5530EL NORTH EUROPE (NORDIC COUNTRIES) INFORMATION Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA.
User Manual BDL5530EL TABLE OF CONTENTS 1. UNPACKING AND INSTALLATION 1.1. UNPACKING 1.2. PACKAGE CONTENTS 1.3. INSTALLATION NOTES 1.4. PORTRAIT MOUNTING 2. PARTS AND FUNCTIONS 2.1. FRONT VIEW 2.2. REAR VIEW 2.3. INPUT/OUTPUT TERMINALS 2.4. REMOTE CONTROL 2.4.1. GENERAL FUNCTIONS 2.4.2. INSERTING THE BATTERIES IN THE REMOTE CONTROL 2.4.3. OPERATING RANGE OF THE REMOTE CONTROL 3. CONNECTIONS TO EXTERNAL EQUIPMENT 3.1. USING THE CABLE RETAINER 3.2. CONNECTING EXTERNAL EQUIPMENT (DVD/VCR/VCD) 3.2.1.
User Manual BDL5530EL 6.4. 6.5. 6.6. DARK DOT DEFECTS PROXIMITY OF PIXEL DEFECTS PIXEL DEFECT TOLERANCES 7. CLEANING AND TROUBLESHOOTING 7.1. CLEANING 7.2. TROUBLESHOOTING 8.
User Manual BDL5530EL 1. UNPACKING AND INSTALLATION 1.1. UNPACKING • This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately. • Due to the size and weight of this display it is recommended for two people to move it. • The protective glass and glass substrate are installed on the front of the product. Since glass can be both broken and scratched easily, the product should be handled with care.
User Manual BDL5530EL 1.4. PORTRAIT MOUNTING Wall mounting holes Notes: • M6 (10mm) screws (with a length 10-15mm longer than the thickness of the mounting bracket) are needed for wall mounting (not included). Tighten the screws securely (recommended torque: 470 - 635N cm) • The mounting interface should comply with the UL1678 standard in North America. The mounting means should be strong enough to bear the weight of the display (approx. 29 kg (63.9 lb) without stands).
User Manual BDL5530EL 2. 2.1. PARTS AND FUNCTIONS FRONT VIEW 1 1. Remote control sensor, ambient light sensor and power indicator • Receives command signals from the remote control. • Detects the ambient lighting conditions around the display.
User Manual BDL5530EL REAR VIEW 1 2 3 4 5 6 38 mm 280 mm Dent depth: 6.5 mm 100 mm 100 mm 100 mm 290.4 mm 2.2. 225 mm 235 mm 7 8 1. VIDEO SOURCE button • Use this button to select the input source. • When the On Screen Display menu is active, this is also used as the SET button. 2. MENU button • Use this button to engage the On Screen Display menu. • When the On Screen Display menu is active, use this button to return to the previous menu. 3.
User Manual BDL5530EL 2.3. INPUT/OUTPUT TERMINALS 12 7 1 2 3 4 5 6 1. AUDIO IN (AUDIO1) Connects to the audio output of a computer. 2. AUDIO OUT R/L Outputs the audio signal from the AUDIO IN (AUDIO1/AUDIO2/AUDIO3) or HDMI jack. 3. SPEAKERS R/L Outputs the audio signal from the AUDIO IN (AUDIO1/AUDIO2/AUDIO3) or HDMI jack to external speakers. 4. AUDIO IN (AUDIO2/AUDIO3) Connects to the audio output of an AV device. 8 9 10 11 13 14 15 16 9.
User Manual BDL5530EL 2.4. 2.4.1. REMOTE CONTROL GENERAL FUNCTIONS POWER button Press to switch on the display from standby mode. Press again to turn it to standby mode. SMART button To select smart picture mode from: • Highbright: for moving images such as Video • Standard: for images (factory setting) • sRGB: for text based images • Cinema: for movies. • User: create your own picture settings. This mode is automatically selected after you change the settings in the Picture menu.
User Manual BDL5530EL DISPLAY button To turn on/off the setting information displayed on the upper right corner of the screen. MENU button To turn the OSD menu on/off. UP button • To move the highlight bar up to adjust the selected item when OSD menu is on. • To move the sub-picture up in “PIP” mode. DOWN button • To move the highlight bar down to adjust the selected item when OSD menu is on. • To move the sub-picture down in “PIP” mode. PLUS button • To increase the adjustment with OSD menu.
User Manual BDL5530EL 2.4.2. INSERTING THE BATTERIES IN THE REMOTE CONTROL 1. Remove the cover on the rear of the remote control. 2. Insert two AAA size 1.5V batteries ensuring that the “+” and “-” ends of the batteries are correctly aligned. 3. Replace the cover. Note: Do not mix battery types, e.g. alkaline and manganese. 2.4.3. OPERATING RANGE OF THE REMOTE CONTROL When pressing a remote control button, point the top of the remote control towards the remote control sensor.
User Manual BDL5530EL 3. CONNECTIONS TO EXTERNAL EQUIPMENT 3.1. USING THE CABLE RETAINER 3.2. CONNECTING EXTERNAL EQUIPMENT (DVD/VCR/VCD) 3.2.1. USING COMPONENT VIDEO INPUT 1. Connect the green-colored (labeled as "Y") jack of the device to the green-colored "Y" jack of the display. 2. Connect the blue-colored (labeled as "Pb") jack of the device to the blue-colored "Pb" jack of the display. 3. Connect the red-colored (labeled as "Pr") jack of the device to the red-colored "Pr" jack of the display.
User Manual BDL5530EL 3.2.2. USING S-VIDEO INPUT 1. Connect the S-Video connector of the external device to the S-VIDEO input of the display. 2. Connect the red (R) and white (L) audio jacks of the device to the AUDIO IN (AUDIO2 or AUDIO3) jacks of the display. DVD/VCR/VCD 3.2.3. USING VIDEO INPUT 1. Connect the Video connector of the external device to the VIDEO IN input of the display. 2. Connect the red (R) and white (L) audio jacks of the device to the AUDIO IN (AUDIO2 or AUDIO3) jacks of the display.
User Manual BDL5530EL 3.2.4. USING HDMI INPUT Connect the HDMI connector of the external device to the HDMI input of the display. DVD/VCR/VCD 3.3. CONNECTING A PC 3.3.1. USING VGA INPUT 1. Connect the 15-pin VGA connector of the PC to the VGA IN connector of the display. 2. Insert the audio cable to the AUDIO IN (AUDIO1) input of the display and connect to the corresponding PC connector.
User Manual BDL5530EL 3.3.2. USING DVI INPUT 1. Connect the DVI-D connector of the PC to the DVI-D connector of the display. 2. Insert the audio cable to the AUDIO IN (AUDIO1) input of the display and connect to the corresponding PC connector. PC 3.3.3. USING HDMI INPUT 1. Connect the DVI-D connector of the PC to the HDMI connector of the display using a DVI-HDMI cable. 2. Insert the audio cable to the AUDIO IN (AUDIO1) input of the display and connect to the corresponding PC connector.
User Manual BDL5530EL 3.4. EXTERNAL AUDIO CONNECTION 3.4.1. CONNECTING EXTERNAL SPEAKERS 1. Connect the speaker wires to the external speaker (SPEAKERS) output of the display. 2. Turn on the unit. Note: Make sure your display is turned off before connecting the speaker wires. External speakers 3.4.2. CONNECTING EXTERNAL AUDIO DEVICE Connect the red (R) and white (L) audio jacks of the external audio device to the AUDIO OUT R/L jacks of the display.
User Manual BDL5530EL 3.5. CONNECTING ANOTHER BDL5530EL DISPLAY You can interconnect multiple BDL5530EL units to create a daisy-chain configuration for applications such as a video wall. Note: The number of displays that can be used in a daisy-chain configuration will depend on the resolution of the input signal being used. • Connect the VGA OUT connector of the display to the VGA IN connector of additional BDL5530EL unit.
User Manual BDL5530EL 4. OSD MENU An overall view of the On-Screen Display (OSD) structure is shown below. This can be used as a reference for further adjusting your display. 4.1. 4.1.1. NAVIGATING THE OSD MENU NAVIGATING THE OSD MENU USING THE REMOTE CONTROL 1. Press the MENU button on the remote control to display the OSD menu. 2. Press the UP/DOWN button to choose the item you want to adjust. 3. Press the PLUS/SET button to enter the submenu. 4.
User Manual BDL5530EL 4.1.2. NAVIGATING THE OSD MENU USING THE DISPLAY’S CONTROL BUTTONS 1. Press the MENU button to display the OSD menu. 2. Press the /button to choose the item you want to adjust. 3. Press the button to enter the submenu. 4. In the submenu, press the / button to toggle between items, or press / button to adjust settings. If there is a submenu, press the button to enter it. 5.
User Manual BDL5530EL 4.2. 4.2.1. OSD MENU OVERVIEW PICTURE MENU Brightness Note: This function is not available when Smart contrast, Light sensor or Brightness under Panel saving is turned on. Disable these functions to make Brightness accessible from the OSD menu. Adjust the overall image brightness by changing the intensity of the LCD panel’s backlight. Use the PLUS/MINUS button to adjust. Contrast Adjust to sharpen the picture quality.
User Manual BDL5530EL Color temperature Select a color temperature for the image. The image has a reddish tint with a lower color temperature, whilst a higher color temperature gives off a more bluish tint. Use the UP/DOWN button to make selection. Color control Note: This function is only available when Color temperature is set to User. With this function you can adjust the color tones of the image precisely by changing the R (Red), G (Green) and B (Blue) settings independently.
User Manual BDL5530EL 4.2.2. SCREEN MENU H position Note: For VGA input only. Adjust the horizontal placement of the picture. Press the PLUS button to move the image to the right, or press the MINUS button to move the image to the left. V position Note: For VGA input only. Adjust the vertical placement of the picture. Press the PLUS button to move the image up, or press the MINUS button to move the image down. Clock Note: For VGA input only. Adjust the width of the image.
User Manual BDL5530EL • 21:9 - The picture is enlarged to 16:9 format. This mode is recommended when displaying pictures that have black bands at the top and bottom (letterbox format). Note: This mode does not support deinterlacing. The screen may flicker when displaying interlaced video. Custom zoom Note: This item is only available when Zoom mode is set to Custom. You can use this function to further customize the zoom settings to suit the image you want to display.
User Manual BDL5530EL 4.2.3. AUDIO MENU Speaker Set the display to play audio using the built-in (internal) speaker, external speakers or external audio devices (if connected). Use the UP/DOWN button to toggle between • Internal • External • Line-out Volume Adjust to increase or decrease the audio output level. Use the PLUS/MINUS button to adjust. Mute To turn the mute function on/off. Use the UP/DOWN button to make selection.
User Manual BDL5530EL 4.2.4. PIP MENU Notes: • For Component, VGA, DVI-D and HDMI inputs only. • For Full and Normal zoom modes only. • The PIP function is turned off by default. Press the PIP ON/OFF button on the remote control to turn on PIP and make it accessible from the OSD menu. PIP To turn PIP mode on/off. Use the UP/DOWN button to make selection. PIP input Select the input signal for the sub-picture. Use the UP/DOWN button to make selection.
User Manual BDL5530EL Notes: • The PIP function is only available under certain signal source combinations as shown in the table below. Main picture signal source Video S-Video Component VGA DVI-D Video S-Video Sub picture Component signal VGA source DVI-D HDMI ( : PIP function available, : PIP function unavailable) • The availability of the PIP function will also depend on the resolution of the input signal being used.
User Manual BDL5530EL 4.2.5. CONFIGURATION 1 MENU Switch on state Set the display to turn on or remain off when the power cord is connected to a wall outlet. Use the UP/DOWN button to toggle between • Last status - The display will return to the previous power status (on/off/standby) when removing and replacing the power cord. • Forced on - The display will turn on when the power cord is connected to a wall outlet.
User Manual BDL5530EL some instances, ghost image damage can be permanent. To avoid such issues, we strongly recommend one of the following actions: • Change the picture periodically • Enable Pixel shift (See Pixel shift under Section 4.2.5.CONFIGURATION 1 MENU) • Use a screen saver with changing images Color system Note: For Video and S-Video inputs only. Select the color system depending on the input video format. Use the UP/DOWN button to make selection. • Auto • PAL 4.43 • PAL 3.58 • SECAM • NTSC 4.
User Manual BDL5530EL 4.2.6. CONFIGURATION 2 MENU OSD turn off Set the period of time the OSD menu stays on the screen (from 5 to 120 seconds) Use the PLUS/MINUS button to adjust. OSD mode Select the orientation of the OSD according to the orientation the display is installed. Use the UP/DOWN button to toggle between • Portrait • Landscape Information OSD Set the period of time the information OSD stays on the screen. The information OSD will display when input signal is changed.
User Manual BDL5530EL 4.2.7. ADVANCED MENU Input resolution Note: For VGA input only. Set the resolution of the VGA input. This is only required when the display is unable to detect the VGA input resolution correctly. Use the UP/DOWN button to toggle between • Auto • 1024x768 • 1280x768 • 1360x768 • 1366x768 Black level expansion Note: For Video, S-Video, Component, and HDMI (video mode) inputs only. This feature offers deeper blacks for an even better image quality.
User Manual BDL5530EL • Progressive - Enable the IP conversion function (recommended). Once enabled, the interlace input signal will be converted to progressive format for better display quality. • Interlace: Disable the IP function. This mode is suitable for displaying motion pictures, but increases the chance of image retention. Film mode Note: For Video, S-Video, Component, and HDMI (video mode) inputs only. Choose to turn on or off the film mode frame conversion function.
User Manual BDL5530EL Example: 2 x 2 screen matrix (4 displays) H monitors = 2 V monitors = 2 5 x 5 screen matrix (25 displays) H monitors = 5 V monitors = 5 H monitors Position Position V monitors V monitors H monitors • H monitors - Select the number of displays on the horizontal side. • V monitors - Select the number of displays on the vertical side. • Position - Select the position of this display in the screen matrix.
User Manual BDL5530EL This function allows you to program up to seven different scheduled time intervals for the display. You can select the time the unit turns on and turns off, the days in a week it is activated, and which input source the display will use for each scheduled activation period.
User Manual BDL5530EL 10. Now you have completed the schedule settings. The on-screen display should look like the illustration below: 11. Press the EXIT button and the menu will close and the schedule settings will take effect. To set up more schedule items, repeat the steps above except that a different schedule item should be selected (schedule item #2 ( 2) through #7 ( 7)) in step 2.
User Manual BDL5530EL • Off - Once a signal is connected, it can only be selected manually. Use the UP/DOWN button to make selection. Advanced option reset Reset all settings in the Advanced option menu. Press the PLUS button to open the submenu, and then press the PLUS/MINUS button to make selection. Select Reset and press the SET button to restore settings to factory preset values. Press the EXIT button to cancel and return to the previous menu.
User Manual BDL5530EL 5. INPUT MODE VGA Resolution Standard Resolution Active Resolution H Pixels V Lines Refresh Rate Pixel Rate 60 Hz 25.175 MHz Aspect Ratio Stand for Mode VGA 640 480 72 Hz 75 Hz 31.5 MHz 31.5 MHz 4:3 Video Graphic Array WVGA 720 400 70 Hz 33.75 MHz 16:9 Wide Video Graphic Array SVGA 800 600 Super VGA 1024 768 4:3 Extended Graphic Array WXGA 1280 768 40 MHz 49.5 MHz 65 MHz 78.75 MHz 79.
User Manual BDL5530EL • If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5KHz (horizontal). In some cases, abnormal signals (such as stripes) might appear on the screen when the PC power is turned off (or if the PC is disconnected). If this happens, press the INPUT button to enter the video mode. Also, make sure that the PC is connected. • If horizontal synchronous signals seem irregular in RGB mode, check PC power saving mode or cable connections.
User Manual BDL5530EL 6. PIXEL DEFECT POLICY We strive to deliver the highest quality products and use some of the industry's most advanced manufacturing processes whilst practicing stringent quality control. However, pixel or sub-pixel defects on the PDP / TFT panels used in Plasma- & LCD- displays are sometimes unavoidable.
6.3. BRIGHT DOT DEFECTS Bright dot defects appear as pixels or sub-pixels that are always lit or "on". These are the examples of bright dot defects: One lit red, green or blue sub-pixel Two adjacent lit sub-pixels: - Red + Blue = Purple - Red + Green = Yellow - Green + Blue = Cyan (Light Blue) Three adjacent lit sub-pixels (one white dot) 6.4. DARK DOT DEFECTS Black dot defects appear as pixels or sub-pixels that are always dark or "off".
User Manual BDL5530EL 7. CLEANING AND TROUBLESHOOTING 7.1. CLEANING Caution When Using the Display • Do not place your hands, face or objects close to the ventilation holes of the display. The top of the display is usually very hot due to the high temperature of air being expelled through the ventilation holes. Burns or personal injuries may occur if any body parts are brought too close.
User Manual BDL5530EL 7.2. TROUBLESHOOTING Symptom No picture is displayed Possible Cause 1. The power cord is disconnected. 2. The main power switch on the back of the display is not switched on. 3. The selected input has no connection. 4. The display is in standby mode with VGA. Interference displayed on Caused by surrounding electrical the display or audible noise appliances, traffic or fluorescent lights. is heard Remedy 1. Plug in the power cord. 2. Make sure the power switch is switched on. 3.
User Manual BDL5530EL 8. TECHNICAL SPECIFICATIONS Display Item Screen size (Active Area) Aspect ratio Number of pixels Pixel pitch Displayable colors Brightness Smart contrast Contrast ratio (typical) Viewing angle Specifications 54.6” (138.68 cm) LCD 16:9 1920 (H) x 1080 (V) 0.21 (H) x 0.63 (V) [mm] 1073.
User Manual BDL5530EL Dimension [W x H x D mm] With Stand Without Stand Weight With Stand Without Stand Environmental Condition Item Operational Temperature Storage Operational Humidity Storage Operational Pressure Storage / Shipment 1530 x 778 x 405 mm 1530 x 732 x 59 mm 31 Kg 29 Kg Specifications 0 ~ 40 C -20 ~ 60 C 20 ~ 80% RH (No condensation) 5 ~ 95% RH (No condensation) 800 ~ 1100 hPa (Altitude: 0 ~ 4,000 m) 700 ~ 1100 hPa (Altitude: 0 ~ 15,000 m) Internal Speaker Item Type Input Impedance Output So
User Manual BDL5530EL RETURN TO THE CONTENTS
