BDL4660EL www.philips.
BDL4660EL Safety Instructions Safety precautions and maintenance WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards. Read and follow these instructions when connecting and using your display: Operation: • Keep the display out of direct sunlight and away from stoves or any other heat sources.
BDL4660EL Read and follow these instructions when connecting and using your display: • Unplug the display if you are not going to use it for an extensive period of time. • Unplug the display if you need to clean it with a slightly damp cloth. The screen many be wiped with a dry cloth when the power is off. However, never use alcohol, solvents or ammonia-based liquids. • Consult a service technician if the display does not operate normally when you have followed the instructions in this manual.
BDL4660EL Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Use only an RF shielded cable that was supplied with the display when connecting this display to a computer device. To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive moisture. THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE- CAUSING EQUIPMENT REGULATIONS.
BDL4660EL Electric, Magnetic and Electromagnetic Fields (“EMF”) 1. We manufacture and sell many products targeted at consumers, which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals. 2. One of our leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products. 3.
BDL4660EL China RoHS 中国电子信息产品污染控制标识要求 (中国RoHS法规标示要求) 产品中有毒有害物质或元素 的名称及含量 有毒有害物质或元素 部件名称 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (Cr 6+) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 外壳 O O O O O O 液晶面板 X O O O O O 电路板组件 X O O O O O 附件 (遥控器，电源线，连接线) X O O O O O 遥控器电池 X O O O O O O: 表示该有毒有害物质在该部件所有均质材料中的含量均在 GB/T26572-2011 标准规定的限量要求以下. X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 GB/T26572-2011 标准规定的限量要求.
BDL4660EL North Europe (Nordic Countries) Information Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA.
BDL4660EL Table Of Contents 1. Unpacking and Installation........................................................1 1.1. Unpacking..........................................................................................1 1.2. Package Contents.........................................................................1 1.3. Installation Notes..........................................................................1 1.4. Installing and Removing Table Stands (optional).........2 1.5. Mounting on a Wall........
BDL4660EL 1. Unpacking and Installation 1.1. Unpacking • This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately. • Due to the size and weight of this display it is recommended for two people to move it. • After opening the carton, ensure that the contents are complete and in good condition. 1.2.
BDL4660EL 1.4. Installing and Removing Table Stands (optional) To install table stands: 1. Ensure your display is powered off. 2. Spread a protective sheet on a flat surface. 3. Grab the carrying handles and place the display face-down on the protective sheet. 4. After inserting the stand in the guide block, tighten the screws on both sides of the display. NOTE: The longer side of the stand should face the front of the display.
BDL4660EL 1.5. Mounting on a Wall To mount this display to a wall, you will have to obtain a standard wall-mounting kit (commercially available). We recommend using a mounting interface that complies with TUV-GS and/or UL1678 standard in North America. Protective Sheet VESA Grid Table Tabletop stand 1. Lay a protective sheet on a table, which was wrapped around the display when it was packaged, beneath the screen surface so as not to scratch the screen face. 2.
BDL4660EL 1.6. Mounting in Portrait Position This display can be installed in portrait position. 1. Remove the table stand, if attached. 2. Rotate 90 degrees clockwise. The “ ” logo should be on the LEFT side when facing the display. 90 90 1.6.1. How to use the logo guider for portrait position 1. Put the guider on the lower-left corner of the front bezel of the display. Fold down both of its edges. 2. Peel off the protective film at the back of the “ ” logo sticker.
BDL4660EL 1.7. Operating Instructions of Edge Alignment Kit 1.7.1. Installing Edge Alignment Kit • Before install edge alignment kit, displays must be mounted to video wall frame correctly. • Using “Thumb Screw” for easy installing. • Using “Edge Alignment Kit-1” on adjacent four displays. 1 2 4 • Using “Edge Alignment Kit-2” on adjacent two displays. • Install the “Edge Alignment Kit-2” with 2 PCS of M4 screw.
BDL4660EL 2. Parts and Functions 2.1. Control Panel 9 MUTE INPUT 1 1 2 3 MENU 4 5 6 7 8 and [ ] buttons and hold down continuously for more than 3 (three) seconds. [ ] button Use this button to turn the display on or put the display to standby. 2 9 [MUTE] button Switch the audio mute ON/OFF.
BDL4660EL 2.2. Input/Output Terminals 24 23 21 2 5 1 1 3 4 7 6 8 9 14 10 11 12 13 AC IN 13 AC power input from the wall outlet. 2 MAIN POWER SWITCH 15 AC OUT IR IN / 5 16 IR OUT 17 18 7 19 20 RS232C OUT 21 RJ-45 HDMI1 IN / 10 22 AUDIO IN AUDIO OUT USB PORT Connect your USB storage device. HDMI2 IN 23 SPEAKERS OUT Audio output to external speakers. DVI IN DVI-D video input. 12 SPEAKER SWITCH Audio output to external AV device. HDMI video/audio input.
BDL4660EL Remote Control 1 2.3.1. General functions 2 2.3. [ ] POWER button Turn the display on or put the display to standby. [PLAY] buttons Control playback of media files. 3 1 2 4 3 5 [ ] HOME button [ ] LIST button No function. 6 15 [ ] [ ] [ ] [ ] NAVIGATION buttons Navigate through menus and choose items. 7 [ ] button Confirm an entry or selection. 6 8 7 8 ] SOURCE button Access the OSD menu. 14 4 5 [ Choose input source.
BDL4660EL 2.3.2. Inserting the batteries in the remote control The remote control is powered by two 1.5V AAA batteries. To install or replace batteries: 1. Press and then slide the cover to open it. 2. Align the batteries according to the (+) and (–) indications inside the battery compartment. 3. Replace the cover. Caution: The incorrect use of batteries can result in leaks or bursting.
BDL4660EL 3. Connecting External Equipment 3.1. Connecting External Equipment (DVD/VCR/VCD) 3.1.1. Using COMPONENT video input Audio Out COMPONENT Out (YPbPr) DVD / VCR / VCD [R] [AUDIO IN] [L] [COMPONENT IN] (YPbPr) 3.1.2.
BDL4660EL 3.1.3. Using HDMI video input DVD / VCR / VCD HDMI Out [HDMI IN] 3.2. Connecting a PC 3.2.1. Using VGA input VGA Out D-Sub 15 pin Audio Out PC [VGA IN] [VGA AUDIO IN] 3.2.2.
BDL4660EL 3.2.3. Using HDMI input HDMI Out PC [HDMI IN] 3.2.4. Using DisplayPort input DisplayPort Out PC [DisplayPort IN] 3.3. Connecting Audio Equipment 3.3.1.
BDL4660EL 3.3.2. Connecting an external audio device Audio In Stereo Amplifier [AUDIO OUT] 3.4. Connecting Multiple Displays in a Daisy-chain Configuration You can interconnect multiple displays to create a daisy-chain configuration for applications such as a video wall. NOTE: Maximum 25 displays (5x5) can be used in a daisy-chain configuration. 3.4.1. Display control connection Connect the [RS232C OUT] connector of DISPLAY 1 to the [RS232C IN] connector of DISPLAY 2.
BDL4660EL Connect the [DP OUT] connector of DISPLAY 1 to the [DP IN] connector of DISPLAY 2. DISPLAY 1 DISPLAY 2 PC [DP] [DP IN] [DP OUT] [DP IN] Connect the [HDMI OUT ] connector of DISPLAY 1 to the [DVI IN] connector of DISPLAY 2. DVD / VCR / VCD DISPLAY 1 DISPLAY 2 [HDMI] [DVI IN] [DVI OUT] [DVI IN] 3.4.3. Analog video connection Connect the [DVI OUT / VGA OUT] connector of DISPLAY 1 to the [VGA IN] connector of DISPLAY 2. DISPLAY 1 DISPLAY 2 PC [VGA] [VGA IN] 3.5.
BDL4660EL 3.6. IR Pass-through Connection DVD / VCR / VCD [IR OUT] [IR IN] (DVD / VCR / VCD) Remote Control (BDL4660EL) 3.7. Wire-connecting to Network If you connect this display to a home network, you can play photos, music and videos from your computer. See Play multimedia files via Local Area Network (Page 16) for more detail. INTERNET ROUTER [RJ-45] [RJ-45] PC To setup the network: 1. Switch on the router and switch on its DHCP setting. 2.
BDL4660EL 4. Operation • {Movie}: Ideal settings for movies. • {Music}: Ideal settings for listening to music. • {Game}: Ideal settings for games. • {News}: Ideal settings for spoken audio, such as the news. 4.5. Play multimedia files via Local Area Network NOTE: T he control button described in this section is mainly on the remote control unless specified otherwise. 4.1. Watch the Connected Video Source See page ������������������������������������� for external equipments connection. 1.
BDL4660EL 3. Press [ button. ] HOME button, Then, choose Setup and press [ 8. Press [ ] ] button, then done. You can play photos, music and movies stored on a computer in your home network. To do so, you need to install recent media server software on the computer. A list of suitable media server software is available in the Help. Setup Internet Source 4. Choose Connect to network and press [ 12 ] button. 3 Done Play files from display 1. Press [ ] HOME button.
BDL4660EL 3. Set DMR as ON. • View network settings Off Network settings On To clear the list of offline media servers, press [ ] OPTIONS button. Then, choose Clear offline servers and press [ button. 4.6. Static IP configuration Digital Media Renderer - D... ] Play multimedia files from USB device 1. Connect your USB device to the USB port on the display. Network name Clear Internet memory USB 4. Set the name of your display. 2. Press [ button.
BDL4660EL Music options Slideshow options While you play music, press [ button to choose an option: ] OPTIONS button, then press [ ] While you play a slideshow, press [ ] OPTIONS button, then press [ ] button to choose an option: • {Shuffle}: Enable or disable random play of tracks. • • {Repeat}: Choose {Repeat} to play a track or an album repeatedly, or choose {Play once} to play a track once. {Shuffle}: Enable or disable random display of pictures in the slideshow.
BDL4660EL 5. 4. Now, you can see the web page. Change your settings Using the remote control: NOTES: • The Opera browser does not support FLASH format. • The browser is not a video source. It will not stay at the browser screen after you restart the display. 1. Press [ ] HOME button to display the OSD menu. 2. Press [ ] or [ ] button to choose Setup. Press [ to enter. ] button 3.
BDL4660EL 5.1. Quick picture and sound Advanced Access advanced settings such as gamma, tint, video contrast and so on. • {Gamma}: Adjust the non-linear setting for picture luminance and contrast. You can choose picture and sound settings with the help of the settings assistant, which demonstrates the effect of your chosen setting immediately. 1. Press [ ] HOME button to display the OSD menu. 2. Choose Setup. Press [ ] button. 3. Choose Quick picture and sound. Press [ 4.
BDL4660EL Example: 5 x 5 screen matrix (25 displays) H monitors = 5 displays V monitors = 5 displays Advanced Access advanced settings to enhance your audio experience. • {Auto volume leveling}: Enable the reduction of sudden volume changes. {Speaker settings}: Turn on or off the internal speakers. • {Clear sound}: Enhance sound quality. • {Audio out format}: Choose the type of audio output through the digital audio output connector.
BDL4660EL 5.2.4. General settings Picture Menu language Picture Menu language Sound Group ID Sound Group ID Tiling Monitor ID Tiling Monitor ID General settings Eco mode General settings Eco mode Auto search Auto search Clock Clock Scheduling Scheduling Sleep timer Sleep timer EasyLink EasyLink Local KB lock Local KB lock RC lock RC lock 1. There are 7 schedule can be set. Go to Status and choose On. Menu language Choose language used for OSD menus.
BDL4660EL 3. Set On time. 6. If {Source} {USB} is chosen. Go to Playlist setting. 0001/0002 Photo Schedule 1 Status Schedule 2 Source Schedule 3 On time Schedule 4 Off time Schedule 5 Schedule On 6 time Repeat modes Photo Video Playlist setting 00 : 00 Schedule 7 Cancel Done Options Exit -- Press [ ] [ ] buttons to choose files. 4. Set Off time. -- Press [ ] [ ] buttons to switch Playlist and File Manager.
BDL4660EL • {Lock but power}: Disable all the keyboard function except the [ ] button. • {Lock all expect volume and power}: Disable all the keyboard function except the [ ], [ ] and [ ] button: Information OSD When you press [ ] POWER button to turn on the display from standby mode or change the input signal, the information OSD is displayed on the upper left corner of the screen. RC lock Choose {Off} to turn off this function. Choose to enable or disable the button function of the remote control.
BDL4660EL 6. USB device compatibility USB Video Subtitle Formats (for language subtitles, etc.) Name MPEG-4 time-based text SAMI SubRip SubViewer Micro DVD File extension .ttxt .smi .srt .sub .sub or .txt Format XML HTML string-based string-based string-based USB Multimedia Formats File extension Container *.avi *.mkv AVI MKV *.asf ASF *.wmv ASF *.mp4 MP4 *.3gp 3GPP *.vro VRO VOB *.mpg *.mpeg PS *.ts *.trp TS Video Codec DivX 3.11/4x/5.1/6.0 XviD H.
BDL4660EL 7. Input Mode VGA Resolution: Standard Resolution Active Resolution H Pixels V Lines VGA 640 480 WVGA 720 400 SVGA 800 600 XGA 1024 768 WXGA WXGA SXGA SXGA WXGA WXGA UXGA HD1080 1280 1280 1280 1280 1360 1366 1600 1920 768 800 960 1024 768 768 1200 1080 Refresh Rate Pixel Rate Aspect Ratio Stand for Mode 60 Hz 72 Hz 75 Hz 70 Hz 60 Hz 75 Hz 60 Hz 75 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 25.175 MHz 31.5 MHz 31.5 MHz 33.75 MHz 40 MHz 49.5 MHz 65 MHz 78.75 MHz 79.
BDL4660EL 8. Pixel Defect Policy We strive to deliver the highest quality products and use some of the industry’s most advanced manufacturing processes whilst practicing stringent quality control. However, pixel or sub-pixel defects on the PDP / TFT panels used in Plasma- & LCD- displays are sometimes unavoidable.
BDL4660EL 8.4. Dark Dot Defects Black dot defects appear as pixels or sub-pixels that are always dark or “off ”. These are the examples of black dot defects: One dark dot 8.5. Two adjacent dark dots = 1 pair of dark dots Two dark dots, specifications defines the minimum distance between dark dots Proximity of Pixel Defects Because pixel and sub-pixels defects of the same type that are nearby one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects.
BDL4660EL 9. Cleaning and Troubleshooting 9.1. Cleaning Caution When Using the Display • Do not bring your hands, face or objects close to the ventilation holes of the display. The top of the display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes. Burns or personal injuries may occur if any body parts are brought too close.
BDL4660EL 9.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 1. Plug in the power cord. 2. The main power switch on the back of the display is not switched on. 2. Make sure the power switch is switched on. 3. The selected input has no connection. 3. Connect a signal connection to the display. 4. The display is in standby mode.
BDL4660EL 10. Technical Specifications Display: Item Specifications Screen Size (Active Area) 46” (116.8 cm) LCD Aspect Ratio 16:9 Number of pixels 1920 (H) x 1080 (V) Pixel pitch 0.53025 (H) x 0.53025 (V) [mm] Displayable colors 10bits(D),1073.
BDL4660EL General: Item Specifications Power Input 100 - 240V ~, 50 - 60Hz, 5.5A Power Output 100 - 240V ~, 50 - 60Hz, 2.5A Power Consumption (Max) 250 W Power Consumption (typ.) 109 W Power Consumption (Standby & Off) <0.5W (RS232 in active) Dimensions (With Stand) [W x H x D] 1052.7 x 662.7 x 400 mm Dimensions (Without Stand) [W x H x D] 1052.7 x 607.3 x 69 mm Weight (With Stand) 23.6 Kg Weight (Without Stand) 21.3 Kg Gross Weight (Without Stand) 28.
2014 © Koninklijke Philips N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. Specifications are subject to change without notice.
