BDL3245E BDL4245E BDL4645E www.philips.
BDL3245E / BDL4245E / BDL4645E Safety Instructions Warnings and Precautions KNOW THESE SAFETY SYMBOLS CAUTION: O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. T REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product.
BDL3245E / BDL4245E / BDL4645E Regulatory Information CE Declaration of Conformity MMD declare under our responsibility that the product is in conformity with the following standards • EN60950-1:2006+A11:2009 (Safety requirement of Information Technology Equipment) • EN55022:2006+A1:2007 (Radio Disturbance requirement of Information Technology Equipment) • EN55024:1998+A1:2001+A2:2003 (Immunity requirement of Information Technology Equipment) • EN61000-3-2:2006 (Limits for Harmonic Current Emission)
BDL3245E / BDL4245E / BDL4645E Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source. The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A).
BDL3245E / BDL4245E / BDL4645E Information for U.K. only WARNING - THIS APPLIANCE MUST BE EARTHED. (B) Important: (A) This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse. 2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved type. 3. Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate 3-pin plug fitted in its place.
BDL3245E / BDL4245E / BDL4645E China RoHS 中国电子信息产品污染控制标识要求 (中国RoHS法规标示要求) 产品中有毒有害物质或元素 的名称及含量 有毒有害物质或元素 部件名称 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (Cr 6+) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 外壳 O O O O O O 液晶面板 X X O O O O 电路板组件 X O O O O O 附件 (遥控器，电源线，连接线) X O O O O O 遥控器电池 X O O O O O O: 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下. X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006 标准规定的限量要求.
BDL3245E / BDL4245E / BDL4645E North Europe (Nordic Countries) Information Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA.
BDL3245E / BDL4245E / BDL4645E Table Of Contents 1. Unpacking and Installation...................................... 1 1.1. Unpacking......................................................................1 1.2. Package Contents......................................................1 1.3. Installation Notes.......................................................1 1.4. Installing and Removing Table Stands..............2 1.5. Mounting on a Wall..................................................3 1.6.
BDL3245E / BDL4245E / BDL4645E 1. Unpacking and Installation 1.1. Unpacking • This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately. • The weight of the product differs - depending on the type. Due to the size and weight, it is recommended to move it by 2 people. • After opening the carton, ensure that the content is in good condition and complete. 1.2.
BDL3245E / BDL4245E / BDL4645E 1.4. Installing and Removing Table Stands To install table stands: 1. Power off the monitor. 2. Spread a protective sheet on a flat surface. 3. Grab the carrying handles and place the monitor face-down on the protective sheet. 4. After inserting the stand in the guide block, tighten the screws on both sides of the monitor. NOTE: The long-end side of the stand should face to the front while installing.
BDL3245E / BDL4245E / BDL4645E 1.5. Mounting on a Wall To mount this monitor to a wall, you will have to obtain a standard wall-mounting kit (commercially available). Using mounting interface that complies with TÜV-GS and/or UL1678 standard in North America is recommended. 100 200 100 Protective Sheet 200 Table Tabletop stand 1. Lay a protective sheet on a table, which was wrapped around the monitor when it was packaged, beneath the screen surface so as not to scratch the screen face. 2.
BDL3245E / BDL4245E / BDL4645E 1.6. Mounting in Portrait Position This monitot can be installed in portrait position. 1. Remove the table stand if they are attached. 2. The “ ” logo should be on the LEFT side when facing the monitor. 90 90 1.6.1. How to use the logo guider for portrait position a. B efore applying, make sure that the guider is in good condition. Fold the “ ” logo back in at the end of the guider. b. Peel off the back side of the protective film from the logo. c.
BDL3245E / BDL4245E / BDL4645E 2. Parts and Functions 2.1. Control Panel 9 MUTE INPUT 1 1 2 3 MENU 4 5 6 7 8 POWER button NOTE: “Keyboard Control Lock Mode” This function completely disables the access to all Keyboard Control functions. To enable or disable the keyboard control lock, press both [ ] and [ ] buttons and hold down continuously for more than 3 (three) seconds. Switch the power on or put the monitor to standby. 2 MUTE button Switch the audio mute ON/OFF.
BDL3245E / BDL4245E / BDL4645E 2.2. Input/Output Terminals BDL3245E BDL4245E/BDL4645E 15 15 BDL3245E (OUT) (OUT) Pr Pb Y 1 3 2 (IN) 1 2 (IN) 3 4 5 6 7 8 9 10 11 12 10 13 14 BDL4245E/BDL4645E (OUT) (OUT) Pr Pb Y 1 3 2 (IN) 2 1 2 1 3 (IN) 4 5 6 7 MAIN POWER SWITCH 8 10 • AUDIO IN 2, 3: RCA phone jack RS232C (OUT/IN) 11 RJ-45 12 VGA OUT (D-Sub) DVI-D IN 13 • S-VIDEO IN (Mini DIN 4 pin): Connect the S-VIDEO (Y/C separate signal) input.
BDL3245E / BDL4245E / BDL4645E 2.3. Remote Control 5 Press to turn on/off the information OSD displayed on the upper right corner of the screen. 2.3.1. General functions 6 POWER 1 10 SMART VIDEO SOURCE AUDIO SOURCE 2 7 11 12 8 13 BRIGHTNESS 5 DISPLAY 6 9 14 15 10 Press to decrease the value in OSD menu. • Press to move the sub-picture left in PIP mode. [SET] button [AUTO ADJUST] button 7 8 17 EXIT VOL UP MUTE [MUTE] button [VIDEO SOURCE] button Press to toggle Video Source Menu.
BDL3245E / BDL4245E / BDL4645E 2.3.2. Inserting the batteries in the remote control The remote control is powered by two 1.5V AAA batteries. To install or replace batteries: 1. Press and then slide the cover to open it. 2. Align the batteries according to the (+) and (–) indications inside the battery compartment. 3. Replace the cover. Caution: An incorrect use of batteries can result in leaks or bursting. Be careful especially about the following points.
BDL3245E / BDL4245E / BDL4645E 3. Connecting External Equipment 3.1. Using the Switch Cover A cover for the main switch is provided to prevent the monitor from being turned on or off accidentally. To lock the cover into position: 1. Align and insert the cover to the ditch located beside the main switch. 2. Use the screw to lock the cover.
BDL3245E / BDL4245E / BDL4645E 3.2. Connecting External Equipment (DVD/VCR/VCD) 3.2.1. Using COMPONENT video input COMPONENT (YPbPr) Audio Output DVD / VCR / VCD To [AUDIO IN 2, 3] COMPONENT (YPbPr) 3.2.2.
BDL3245E / BDL4245E / BDL4645E 3.3. Connecting a PC 3.3.1. Using VGA input From analog VGA output Mini D-Sub 15 pin From audio output PC or IBM compatible To [AUDIO IN 1, 2, 3] To [VGA IN] 3.3.2.
BDL3245E / BDL4245E / BDL4645E 3.3.3.
BDL3245E / BDL4245E / BDL4645E 3.4. External Audio Connection 3.4.1. Connecting external speakers External speaker 3.4.2.
BDL3245E / BDL4245E / BDL4645E 3.5. Connecting Monitors in a Daisy-chain Configuration You can interconnect multiple sets of this monitor to create a daisy-chain configuration for applications like a TV wall. NOTE: Maximum 25 displays (5x5) can be used in a daisy-chain configuration. 3.5.1. Video connection Do one the following connections: • Connect the [RS232C OUT] connector of monitor 1 to the [RS232C IN] connector of monitor 2.
BDL3245E / BDL4245E / BDL4645E 4. OSD Menu (Need Check) Brightness Adjust the overall image brightness by changing the intensity of the LCD panel’s backlight. An overall view of the On-Screen Display (OSD) structure is shown below. You can use it as a reference for further adjusting your monitor. 4.1. Contrast Navigating the OSD Menu Adjust to sharpen the picture quality. The black portions of the picture become richer in darkness and the white become brighter. 4.1.1.
BDL3245E / BDL4245E / BDL4645E 4.2.2. Screen menu Picture 21:9 The picture is enlarged to 16:9 format. This mode is recommended when displaying pictures that have black bands at the top and bottom (letterbox format). H position V position Screen Audio PIP Configuration1 Clock Clock phase Zoom mode Custom zoom Custom zoom You can use this function to further customize the zoom settings to suit the image you want to display.
BDL3245E / BDL4245E / BDL4645E Volume Main Picture Adjust to increase or decrease the audio output level. DVI VGA HDMI X X X X O O X X X X O O X X X X O O YPbPr S-Video Video Select the audio input source according to the audio signal source connected to the audio input and HDMI sockets on the monitor. Sub Picture DVI VGA HDMI YPbPr S-Video Video The options are: {HDMI} / {Audio1} / {Audio2} / {Audio3}.
BDL3245E / BDL4245E / BDL4645E Language Factory reset Select the language used in the OSD menu. The options are: { { }/{ }/{ }/{ }/{ }/{ }/{ }. }/{ }/ Panel saving • • • 4.2.6. Configuration2 menu {Cooling Fan} - Select {On} to turn on the cooling fan all the time. Select {Auto} to turn on/off the cooling fan according to the monitor temperature. NOTE: Reset Cancel Choose to enable the panel saving functions to reduce the risk of the “image persistence”.
BDL3245E / BDL4245E / BDL4645E 4.2.7. Advanced option menu Picture per-second (24 fps) input signal format to DVD video signal format. Once this function is enabled, it is recommended that you set the {Scan conversion} function to {Progressive}. Input resolution • Black level expansion Screen Audio PIP Configuration1 Scan mode IR control Scan conversion Select the operation mode of the remote control when multiple monitors are connected via the RS232C connection.
BDL3245E / BDL4245E / BDL4645E Example: 5 x 5 screen matrix (25 monitors) H monitors = 5 monitors V monitors = 5 monitors Heat status This function allows you to check the thermal status of the monitor at any time. The accuracy of the temperature indicated is +/- 5 degrees (C or F).
BDL3245E / BDL4245E / BDL4645E Advanced option reset Schedule Reset all settings in the Advanced option menu. 1. Press [SET] or [ ] button to enter the submenu. Today 1 2 3 4 5 6 7 2011 . 08 . 04 On ＿:＿ 1 Every day Wed SAT Off ＿:＿ THU 2. Press [ ] or [ ] button to select {Reset} and press the [SET] button to restore settings to factory preset values. 20 : 19 : 55 2 MON THU SUN Input ＿ 3 TUE FRI Every week 3.
BDL3245E / BDL4245E / BDL4645E 5. Input Mode (Need Check) VGA Resolution Standard Resolution VGA WVGA SVGA XGA WXGA WXGA SXGA SXGA WXGA WXGA UXGA HD1080 Active Resolution H Pixels V Lines 480 640 72 Hz 75 Hz 720 400 600 800 75 Hz 768 1024 75 Hz 1280 768 1280 800 1280 960 1280 1024 1360 768 1366 768 1600 1200 1920 1080 Refresh Rate Pixel Rate Aspect Ratio Stand for Mode 60 Hz 72 Hz 75 Hz 70 Hz 60 Hz 75 Hz 60 Hz 75 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 25.175 MHz 31.5 MHz 31.5 MHz 33.
BDL3245E / BDL4245E / BDL4645E 6. Pixel Defect Policy Philips strives to deliver the highest quality products. We use some of the industry’s most advanced manufacturing processes and practice stringent quality control. However, pixel or sub-pixel defects on the PDP / TFT panels used in Plasma- & LCD- displays are sometimes unavoidable.
BDL3245E / BDL4245E / BDL4645E 6.4. Dark Dot Defects Black dot defects appear as pixels or sub-pixels that are always dark or “off ”. These are the examples of black dot defects: One dark dot 6.5.
BDL3245E / BDL4245E / BDL4645E 7. Cleaning and Troubleshooting (Need Check) 7.1. Cleaning Cautions When Using the Display • Do not bring your hands, face or objects close to the ventilation holes of the display. Top of display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes. Burns or personal injuries may occur if any body parts are brought too close.
BDL3245E / BDL4245E / BDL4645E 7.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 1. Plug in the power cord. 2. The main power switch on the back of the monitor is not switched on. 2. Make sure the power switch is switched on. 3. The selected input has no connection. 3. Connect a signal connection to the monitor. 4. The monitor is in standby mode.
BDL3245E / BDL4245E / BDL4645E 8. Technical Specifications (Need Check) BDL3245E Display Item Specifications Screen Size (Active Area) 32” LCD Aspect ratio 16:9 Number of pixels 1920 (H) x 1080 (V) Pixel pitch 0.36375 (H) x 0.36375 (V) [mm] Displayable colors 1.
BDL3245E / BDL4245E / BDL4645E Environmental Condition Item Temperature Specifications Operational 0 ~ 40°C Storage -20 ~ 60°C Humidity Operational 20 ~ 80% RH (No condensation) Storage 5 ~ 95% RH (No condensation) Pressure Operational 795 ~ 1013 hPa (Altitude: 0 ~ 4,500 m) Storage / Shipment 300 ~ 1013 hPa (Altitude: 0 ~ 9,000 m) Internal Speaker Item Specifications Type 1 Way 1 Speaker Input 10 W (RMS) Impedance 8Ω Output Sound Pressure 82 dB/W/M Frequency Response 160 Hz ~ 13 KH
BDL3245E / BDL4245E / BDL4645E General Item Specifications Power Supply AC 100 ~ 240V, 50 ~ 60Hz Power Consumption (Max) 260W Power Consumption (typ.) 230W Power Consumption (Standby & Off) <1W (RS232 in active) Dimension (With Stand) [W x H x D] 991.6 x 621 x 329.6 mm Dimension (Without Stand) [W x H x D] 991.6 x 584 x 115.5 mm Weight (With Stand) 24.
BDL3245E / BDL4245E / BDL4645E RS232C D-Sub Jack x 2 (9 pin) TXD + RXD (1:1) RJ-45 RJ-45 Jack x 1 (8 pin) 10/100 Lan Port HDMI Input HDMI Jack x 1 (Type A) (18 pin) Digital RGB: TMDS (Video + Audio) MAX: Video - 720p, 1080p, 1920 x 1080/60 Hz (WUXGA) Audio - 48 KHz/ 2 Channel (L+R) Supports LPCM only DVI-D Input DVI-D jack Digital RGB: TMDS (Video) VGA Input D-Sub Jack x 1 (15 pin) Analog RGB: 0.7V [p-p] (75Ω), H/CS/V: TTL (2.
2011 © Koninklijke Philips Electronics N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V. and are used under license from Koninklijke Philips Electronics N.V. Specifications are subject to change without notice.
