BDL4250EL BDL4650EL www.philips.
BDL4250EL / BDL4650EL Safety Instructions Warnings and Precautions KNOW THESE SAFETY SYMBOLS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product.
BDL4250EL / BDL4650EL Regulatory Information CE Declaration of Conformity We declare under our responsibility that the product is in conformity with the following standards: • EN60950-1:2006+A11:2009+A1:2010+A12:2011 (Safety requirement of Information Technology Equipment). • EN55022:2010 (Radio Disturbance requirement of Information Technology Equipment). • EN55024:2010 (Immunity requirement of Information Technology Equipment).
BDL4250EL / BDL4650EL Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, display, printer, and so on) should have the same power supply source. The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A).
BDL4250EL / BDL4650EL Information for U.K. only WARNING - THIS APPLIANCE MUST BE EARTHED. (B) Important: (A) This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse. 2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved type. 3. Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate 3-pin plug fitted in its place.
BDL4250EL / BDL4650EL China RoHS 中国电子信息产品污染控制标识要求 (中国RoHS法规标示要求) 产品中有毒有害物质或元素 的名称及含量 有毒有害物质或元素 部件名称 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (Cr 6+) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 外壳 O O O O O O 液晶面板 X O O O O O 电路板组件 X O O O O O 附件 (遥控器，电源线，连接线) X O O O O O 遥控器电池 X O O O O O O: 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下. X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006 标准规定的限量要求.
BDL4250EL / BDL4650EL North Europe (Nordic Countries) Information Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA.
BDL4250EL / BDL4650EL Table Of Contents 1. 2. 3. Unpacking and Installation...................................... 1 1.1. Unpacking......................................................................1 1.2. Package Contents......................................................1 1.3. Installation Notes.......................................................1 1.4. Installing and Removing Table Stands (optional)........................................................................2 1.5.
BDL4250EL / BDL4650EL 1. Unpacking and Installation 1.1. Unpacking • This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately. • Due to the size and weight of this display it is recommended for two people to move it. • After opening the carton, ensure that the contents are complete and in good condition. 1.2.
BDL4250EL / BDL4650EL 1.4. Installing and Removing Table Stands (optional) To install table stands: 1. Ensure your display is powered off. 2. Spread a protective sheet on a flat surface. 3. Grab the carrying handles and place the display face-down on the protective sheet. 4. After inserting the stand in the guide block, tighten the screws on both sides of the display. NOTE: The longer side of the stand should face the front of the display.
BDL4250EL / BDL4650EL 1.5. Mounting on a Wall To mount this display to a wall, you will have to obtain a standard wall-mounting kit (commercially available). We recommend using a mounting interface that complies with TUV-GS and/or UL1678 standard in North America. Protective Sheet VESA Grid Table Tabletop stand 1. Lay a protective sheet on a table, which was wrapped around the display when it was packaged, beneath the screen surface so as not to scratch the screen face. 2.
BDL4250EL / BDL4650EL 1.6. Mounting in Portrait Position This display can be installed in portrait position. 1. Remove the table stand, if attached. 2. Rotate 90 degrees clockwise. The “ ” logo should be on the LEFT side when facing the display. 90 90 1.6.1. How to use the logo guider for portrait position 1. Put the guider on the lower-left corner of the front bezel of the display. Fold down both of its edges. 2. Peel off the protective film at the back of the “ ” logo sticker.
BDL4250EL / BDL4650EL 2. Parts and Functions 2.1. Control Panel 9 MUTE INPUT 1 1 2 3 MENU 4 5 6 7 8 NOTE: “Keyboard Control Lock Mode” This function completely disables the access to all Keyboard Control functions. To enable or disable the keyboard control lock, press both ] and [ ] buttons and hold down continuously for more than 3 (three) seconds. POWER button Use this button to turn the display on or put the display to standby. 2 MUTE button Switch the audio mute ON/OFF.
BDL4250EL / BDL4650EL 2.2. Input/Output Terminals 20 19 18 17 2 1 1 8 3 4 5 6 7 13 9 10 11 12 AC IN 12 MAIN POWER SWITCH 13 AC OUT 14 IR pass through: 15 AC power input from the wall outlet. 2 16 RS232C OUT 17 RS232C IN 18 RJ-45 19 20 KENSINGTON LOCK Used for security and theft prevention. DisplayPort DVI IN DVI-D video input. 11 SPEAKERS OUT External speakers output. HDMI IN DisplayPort video input.
BDL4250EL / BDL4650EL 2.3. Remote Control 5 2.3.1. General functions 6 POWER 1 10 SMART VIDEO SOURCE AUDIO SOURCE 2 7 8 12 PIP 9 13 BRIGHTNESS 5 DISPLAY 6 • Press to move the sub-picture left in PIP mode. [SET] button [AUTO ADJUST] button 14 15 10 11 17 AUTO ADJUST EXIT VOL UP MUTE [VIDEO SOURCE] button Press to toggle Video Source Menu. Press [ ] or [ ] button to select one of the video sources among Displayport, DVI-D, VGA, HDMI, Component, Video.
BDL4250EL / BDL4650EL 2.3.2. Inserting the batteries in the remote control The remote control is powered by two 1.5V AAA batteries. To install or replace batteries: 1. Press and then slide the cover to open it. 2. Align the batteries according to the (+) and (–) indications inside the battery compartment. 3. Replace the cover. Caution: The incorrect use of batteries can result in leaks or bursting.
BDL4250EL / BDL4650EL 3. Connecting External Equipment 3.1. Using the Switch Cover A cover for the power switch is provided to prevent the display from being turned on or off accidentally. To lock the cover into position: 1. Align and insert the cover to the indentation located beside the power switch. 2. Use the screw to lock the cover.
BDL4250EL / BDL4650EL 3.2. Connecting External Equipment (DVD/VCR/VCD) 3.2.1. Using COMPONENT video input Audio Out COMPONENT Out (YPbPr) DVD / VCR / VCD [R] [AUDIO IN] [L] [COMPONENT IN] (YPbPr) 3.2.2. Using Video Source input Audio Out Y/CVBS Out [R] [L] DVD / VCR / VCD [AUDIO IN] [Y/CVBS IN] 3.2.3.
BDL4250EL / BDL4650EL 3.3. Connecting a PC 3.3.1. Using VGA input VGA Out D-Sub 15 pin PC [R] Audio Out [L] [AUDIO IN] [VGA IN] [VGA AUDIO IN] 3.3.2. Using DVI input DVI Out PC [R] Audio Out [L] [AUDIO IN] [DVI IN] [VGA AUDIO IN] 3.3.3.
BDL4250EL / BDL4650EL 3.3.4. Using DisplayPort input DisplayPort Out PC [DisplayPort IN] 3.4. Connecting Audio Equipment 3.4.1. Connecting external speakers External speakers 3.4.2.
BDL4250EL / BDL4650EL 3.5. Connecting Multiple Displays in a Daisy-chain Configuration You can interconnect multiple displays to create a daisy-chain configuration for applications such as a video wall. NOTE: Maximum 25 displays (5x5) can be used in a daisy-chain configuration. 3.5.1. Display control connection Connect the [RS232C OUT] connector of DISPLAY 1 to the [RS232C IN] connector of DISPLAY 2. PC [RS-232C] DISPLAY 1 [RS-232C IN] DISPLAY 2 [RS-232C OUT] [RS-232C IN] 3.5.2.
BDL4250EL / BDL4650EL 3.5.3. Analog video connection Connect the [DVI OUT / VGA OUT] connector of DISPLAY 1 to the [VGA IN] connector of DISPLAY 2.
BDL4250EL / BDL4650EL 4. OSD Menu 4.2. An overall view of the On-Screen Display (OSD) structure is shown below. You can use it as a reference for further adjusting your display. 4.1. OSD Menu Overview 4.2.1. Picture menu Navigating the OSD Menu Picture Contrast Screen 4.1.1.
BDL4250EL / BDL4650EL NOTE: This item is functional only when {Color temperature} is set to {User}. Clock Smart contrast NOTE: This item is functional for VGA input only. Smart contrast function is to enhance image contrast on darker scenes when activated. The Brightness setting in the Picture menu will be disabled when Smart Contrast is activated. Clock phase Adjust the width of the image. Adjust to improve the focus, clarity and stability of the image.
BDL4250EL / BDL4650EL Audio source V zoom Select the audio input source according to the audio signal source connected to the audio input and HDMI sockets on the display. Expands the vertical size of the image only. H position Moves the horizontal position of the image left or right. V position Moves the vertical position of the image up or down. Choose from: {Displayport} / {HDMI} / {Audio1} / {Audio2}.
BDL4250EL / BDL4650EL Main Picture Sub Picture Displayport HDMI DVI-D VGA YPbPr Video Displayport HDMI DVI-D VGA YPbPr Video X X X O O O X X X O O O X X X O O O O O O X X X O O O X X X O O O X X X • Language Select the language used in the OSD menu.
BDL4250EL / BDL4650EL Network settings OSD turn off Assign {IP address}, {Subnet Mask}, and {Default gateway} for the display. Set the period of time the OSD (on-screen display) menu stays on the screen. The options are: {5 ~ 120} seconds. Network settings Information OSD 0 9 Network host name Set the period of time the information OSD is displayed on the upper right corner of the screen. The information OSD will display when input signal is changed.
BDL4250EL / BDL4650EL • {Auto}: Determines the resolution automatically. The selected settings will become effective after turning off the power and turning it on again. HDMI clock threshold • {Primary} - Designate this display as the primary display for remote control operation. Only this display can be operated by the remote control. • {Secondary} - Designate this display as the secondary display.
BDL4250EL / BDL4650EL • H monitors - Select the number of displays on the horizontal side. Date and time • V monitors - Select the number of displays on the vertical side. Adjust the current date and time for the display’s internal clock. • Position - Select the position of this display in the screen matrix. • Frame comp. - Choose to turn the frame compensation function on or off.
BDL4250EL / BDL4650EL 2. Press [ ] or [ ] button to select a schedule item (item number 1 ~ 7), and then press [ ] button to mark it the item number. a rotation sensor in the monitor enables the operating system to keep the display upright as the monitor is moved between its portrait and landscape positions. The following DDC/CI commands should be supported via command line: Schedule Today 1 2 3 4 5 6 7 2012 . 08 .
BDL4250EL / BDL4650EL • Auto search is functional for No signal only. If the user set the input source manually, the display is based on the users set priority. APM Power save setting. • {Off} - No signal, direct shutdown. ( Default ) • {On} - No signal, enter into Power Save mode. Advanced option reset Reset all settings in the Advanced option menu to factory preset values. 1. Press [SET] or [ ] button to enter the submenu. 2.
BDL4250EL / BDL4650EL 5. Input Mode VGA Resolution: Standard Resolution VGA WVGA SVGA XGA WXGA WXGA SXGA SXGA WXGA WXGA UXGA HD1080 Active Resolution H Pixels V Lines 480 640 72 Hz 75 Hz 720 400 600 800 75 Hz 768 1024 75 Hz 1280 768 1280 800 1280 960 1280 1024 1360 768 1366 768 1600 1200 1920 1080 Refresh Rate Pixel Rate Aspect Ratio Stand for Mode 60 Hz 72 Hz 75 Hz 70 Hz 60 Hz 75 Hz 60 Hz 75 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 25.175 MHz 31.5 MHz 31.5 MHz 33.75 MHz 40 MHz 49.
BDL4250EL / BDL4650EL 6. Pixel Defect Policy We strive to deliver the highest quality products and use some of the industry’s most advanced manufacturing processes whilst practicing stringent quality control. However, pixel or sub-pixel defects on the PDP / TFT panels used in Plasma- & LCD- displays are sometimes unavoidable.
BDL4250EL / BDL4650EL 6.4. Dark Dot Defects Black dot defects appear as pixels or sub-pixels that are always dark or “off ”. These are the examples of black dot defects: One dark dot 6.5.
BDL4250EL / BDL4650EL 7. Cleaning and Troubleshooting 7.1. Cleaning Caution When Using the Display • Do not bring your hands, face or objects close to the ventilation holes of the display. The top of the display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes. Burns or personal injuries may occur if any body parts are brought too close.
BDL4250EL / BDL4650EL 7.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 1. Plug in the power cord. 2. The main power switch on the back of the display is not switched on. 2. Make sure the power switch is switched on. 3. The selected input has no connection. 3. Connect a signal connection to the display. 4. The display is in standby mode.
BDL4250EL / BDL4650EL 8. Technical Specifications 8.1. BDL4250EL Display: Item Specifications Screen Size (Active Area) 42” LCD (106.7 cm) Aspect Ratio 16:9 Number of pixels 1920 (H) x 1080 (V) Pixel pitch 0.4845 (H) x 0.
BDL4250EL / BDL4650EL Dimensions (Without Stand) [W x H x D] 965.8 x 558.8 x 69 mm Weight (With Stand) 20.6 Kg Weight (Without Stand) 18.3 Kg Gross Weight (Without Stand) 24.
BDL4250EL / BDL4650EL 8.2. BDL4650EL Display: Item Specifications Screen Size (Active Area) 46” LCD (116.8 cm) Aspect Ratio 16:9 Number of pixels 1920 (H) x 1080 (V) Pixel pitch 0.17675 (H) x 0.53025 (V) [mm] Displayable colors 1073.
BDL4250EL / BDL4650EL Weight (Without Stand) 22.0 Kg Gross Weight (Without Stand) 28.
2012 © Koninklijke Philips Electronics N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V. and are used under license from Koninklijke Philips Electronics N.V. Specifications are subject to change without notice.
