Philips Professional & Business Solutions EN User Manual TYPE NR.
User Manual BDL3231/BDL4231 SAFETY INSTRUCTIONS WARNINGS AND PRECAUTIONS KNOW THESE SAFETY SYMBOLS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product.
User Manual BDL3231/BDL4231 REGULATORY INFORMATION CE DECLARATION OF CONFORMITY Philips Consumer Electronics declare under our responsibility that the product is in conformity with the following standards • EN60950-1:2001 (Safety requirement of Information Technology Equipment) • EN55022:2006 (Radio Disturbance requirement of Information Technology Equipment) • EN55024:1998+A1:2001+A2:2003 (Immunity requirement of Information Technology Equipment) • EN6100-3-2:2000+A2:2005 (Limits for Harmonic Current Emis
User Manual BDL3231/BDL4231 POLISH CENTER FOR TESTING AND CERTIFICATION NOTICE The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source. The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A).
User Manual BDL3231/BDL4231 INFORMATION FOR UK ONLY WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse. 2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved type. 3. Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate 3-pin plug fitted in its place.
User Manual BDL3231/BDL4231 NORTH EUROPE (NORDIC COUNTRIES) INFORMATION Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA.
User Manual BDL3231/BDL4231 中國電子信息產品污染控制標識要求 (中國RoHS法規標示要求) 產品中有毒有害物質或元素的名稱及含量 部件名稱 有毒有害物質或元素 鎘 六價鉻 多溴聯苯 多溴二苯醚 ○ ○ ○ ○ 外殼 鉛 ○ 汞 ○ 液晶面板 × × ○ ○ ○ ○ 電路板組件 附件 (遙控器，電源線，連接線) 遙控器電池 × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ ○：表示該有毒有害物質在該部件所有均質材料中的含量均在SJ/T11363-2006 標准規定的限量要求以下 ◦ ×：表示該有毒有害物質至少在該部件的某一均質材料中的含量超出SJ/T11363-2006 標准規定的限量要求 ◦ 10 環保使用期限 此標識指期限(十年)，電子信息產品中含有的有毒有害物質或元素在正常使用的條件下不會發生外泄或突變 ，電子信息產品用戶使用該電子信息產品不會對環境造成嚴重污染或對其人身、財產造成嚴重損害的期限。
User Manual BDL3231/BDL4231 TABLE OF CONTENTS 1. IMPORTANT NOTES AND SAFETY INSTRUCTIONS 1.1 SAFETY INSTRUCTIONS 1.2 WARNING AND CAUTION 1.3 CLEANING & CARE 1.4 OTHER RELATED INFORMATION 1.4.1 INFORMATION FOR USERS IN THE U.S. 1.4.2 INFORMATION FOR USERS OUTSIDE THE U.S. 2. UNPACKING AND INSTALLATION 2.1 UNPACKING 2.2 PACKAGE CONTENTS 2.3 INSTALLATION NOTES 2.4 PORTRAIT MOUNTING 3. PARTS AND FUNCTIONS 3.1 FRONT VIEW 3.2 REAR VIEW 3.3 REMOTE CONTROL 3.3.1 GENERAL FUNCTIONS 3.3.2 TELETEXT FUNCTIONS 3.3.
User Manual BDL3231/BDL4231 1. IMPORTANT NOTES AND SAFETY INSTRUCTIONS 1.1 SAFETY INSTRUCTIONS 1. Read these instructions. 13. Unplug this apparatus during lightning storms or 2. Keep these instructions. when unused for long periods of time. 3. Heed all warnings. 14. Refer all servicing to qualified service personnel. 4. Follow all instructions. Servicing is required when the apparatus has been 5. Do not use this apparatus near water. damaged in any way, such as power-supply cord or 6.
User Manual BDL3231/BDL4231 17. Tilt/Stability - All televisions must comply with 22. For ventilation, leave at least 4” to 6” free all around recommended international global safety standards the monitor. Do not place the monitor on a carpet. for tilt and stability properties of its cabinet design. • Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet which could ultimately overturn the product.
User Manual BDL3231/BDL4231 1.2 WARNING AND CAUTION WARNING • Unplug this product from the wall outlet immediately when it smokes or makes a strange smell. • Do not block any ventilation openings. (This can result in a risk of fire or electric shock.) • Do not overload wall outlets or extension cords (This can result in a risk of fire or electric shock.) • Connect at the receptacle certainly not to be shaken (This can result in a risk of heat and a fire if it is connected to the wall outlet imperfectly.
User Manual BDL3231/BDL4231 1.3 CLEANING & CARE • To avoid possible shock hazard, please be sure that the monitor is unplugged from the electrical outlet before cleaning. • When cleaning the monitor screen, take care not to scratch or damage the screen surface (avoid wearing jewelry or using anything abrasive). • Wipe the front of the screen with a clean cloth dampened with water. Use even, easy, vertical strokes when cleaning.
User Manual BDL3231/BDL4231 2. UNPACKING AND INSTALLATION 2.1 UNPACKING • This product is packed in a carton, together with the standard accessories. Any other optional accessories will be packed separately. • The weight of the product differs - depending on the type - from 12 to 22 kg. Due to the size and weight it is recommended to move it by 2 people. • The protective glass and the glass substrate are installed on the front of the product.
User Manual BDL3231/BDL4231 2.3 INSTALLATION NOTES • Due to the high power consumption, always use the plug exclusively designed for this product. If an extended line is required, please consult your service agent. • The product should be installed on a flat surface to avoid tipping. The distance between the back of the product and the wall should be maintained for proper ventilation.
User Manual BDL3231/BDL4231 3. PARTS AND FUNCTIONS 1 3.1 2 3 4 FRONT VIEW 1. VOL+/- button Use these buttons to adjust the volume. When the On Screen Menu is active, use these as UP/DOWN menu buttons. 2. MENU button Use this button to engage the On Screen Display menu. 3. CH+/- button Use these buttons to select the input source. When the On Screen Menu is active, use these as LEFT/RIGHT menu buttons. 4. POWER button Use this button to switch monitor on/off.
User Manual BDL3231/BDL4231 1 2 3 4 11 3.2 5 6 12 7 8 9 10 13 REAR VIEW 1. Power Switch Press to switch power on/off. 8. Mono Speaker Out Connect 1W/8Ω audio cable to the external speaker. 2. AC In Connect the supplied power cord to the wall outlet. 9. RS232 RS232 network connection input for the use of loop through function. 3. External Speaker Connect to external speakers. 10. Service 2 Connect to a PC for updating software. 4. Speaker Switch Int./ Ext.
User Manual BDL3231/BDL4231 3.3 REMOTE CONTROL 3.3.1 GENERAL FUNCTIONS Standby Power button Press to switch on the monitor from standby mode. Press again to turn it off to standby mode. pause/play, next, previous, and stop buttons Function when a media player card or possibly NetX card is in the card slot of the set. Auto/Text button Use to adjust the screen automatically when connected to the PC input.
User Manual BDL3231/BDL4231 Display menu button Press to activate on screen display menu. Digital menu button Press to activate on screen menu of any digital card. OK button Press to confirm the chosen OSD function. / Back/Channel button Either MHEG, MHP, or navigation functions on media player card or NetX card. VOL+/- button Press + or - to adjust the volume. Mute button Press to disable or enable the audio. P+/- button Press to select the input source.
User Manual BDL3231/BDL4231 3.3.2 TELETEXT FUNCTIONS Note: The following buttons are using in Teletext mode only, which are available in Europe and some of the Asia Pacific TV systems. Auto/Teletext button Press to switch Teletext on/off. When a CVBS (AV/CARD AV) source is selected with teletext content, teletext can be shown by pressing this button. Numerical buttons Press to enter a (3-digit) page number. Cursor left/right Press to jump to the previous or next page.
User Manual BDL3231/BDL4231 4. CONNECTIONS TO EXTERNAL EQUIPMENT 4.1 CONNECTING EXTERNAL EQUIPMENT (DVD/VCR/ VCD/Hi-Fi system) 4.1.1 USING COMPONENT VIDEO INPUT 1. Connect the green-colored (labeled as "Y") jack of the device to the green-colored "Y" jack of the monitor. 2. Connect the blue-colored (labeled as "Pb") jack of the device to the blue-colored "Pb" jack of the monitor. 3. Connect the red-colored (labeled as "Pr") jack of the device to the red-colored "Pr" jack of the monitor. 4.
User Manual BDL3231/BDL4231 4.2 EXTERNAL AUDIO CONNECTION 4.2.1 CONNECTING EXTERNAL SPEAKER 1. Connect the speaker wires to the external speaker output of the monitor. 2. Turn on the monitor. 3. Press the speaker switch button and set it as external. Note: Before connecting the speaker wires to the monitor, turn off your monitor. 4.3 CONNECTING A PC 4.3.1 USING PC INPUT 1. Connect the 15-pin VGA connector of the PC to the VGA connector of the monitor. 2.
User Manual BDL3231/BDL4231 5. OSD MENU 5.1 SETUP MENU An overall view of the On-Screen Display (OSD) structure is shown below. You can use it as a reference for further adjusting your monitor. 1. Press DISPLAY MENU button on the remote control. 2. Press cursor UP/DOWN button to choose the item you want to adjust. 3. Press cursor LEFT/RIGHT button to toggle between sub-menu or adjust the item you selected. 4.
User Manual BDL3231/BDL4231 C O M M U N I C AT I O N SP-SPI SMARTPORT > 63 STORE RS232 ID SPEED DCM TYPE 1200 NO SOURCE SWITCH C O M M U N I C AT I O N SMARTPORT SP-SPI > 63 STORE RS232 ID SPEED DCM TYPE 1200 NO SOURCE SWITCH C O M M U N I C AT I O N SMARTPORT SP-SPI > 63 STORE RS232 ID SPEED DCM TYPE 1200 NO SOURCE SWITCH C O M M U N I C AT I O N SMARTPORT SP-SPI STORE RS232 ID > 63 SPEED DCM TYPE 1200 NO SOURCE SWITCH STORE Press to store or set the setting of communication menu.
User Manual BDL3231/BDL4231 5.1.3 OSD MENU CONFIGURATION 1. Press DISPLAY MENU button on the remote control. 2. Use cursor DOWN button to highlight CONFIGURATION. 3. Use cursor RIGHT button to enter it. 4. Press cursor UP/DOWN button to toggle between SWITCH ON/ OSD, PICTURE/SOUND, SECURITY, CONTROL, VIDEO ADJUSTMENT, and FEATURES. 5. Press DISPLAY MENU button on the remote control to return to sub-menu or press again to exit the menu. Note: VIDEO ADJUSTMENT is only support in PC-A mode.
User Manual BDL3231/BDL4231 SWITCH POWER ON SWITCH ON SWITCH ON / OSD FORCED ON AV SOURCE ON VOLUME 30 SWITCH ON PIC FMT V O L U M E I N D I C AT O R WIDESCREEN YES D I S P L AY POWER SOURCE ALL LED ACTIVE > WELCOME MESSAGE SWITCH POWER ON SWITCH ON SWITCH ON / OSD FORCED ON AV SOURCE ON VOLUME 30 SWITCH ON PIC FMT V O L U M E I N D I C AT O R WIDESCREEN YES D I S P L AY POWER SOURCE ALL LED ACTIVE > WELCOME MESSAGE SWITCH POWER ON SWITCH ON SWITCH ON / OSD FORCED ON AV SO
User Manual BDL3231/BDL4231 PICTURE/SOUND In this submenu, the picture and sound settings of the monitor can be adjust.
User Manual BDL3231/BDL4231 SECURITY In this submenu, the security settings of the monitor can be configured.
User Manual BDL3231/BDL4231 VIDEO ADJUSTMENT (Only supported in PC-A mode) Fine tuning display geometry and time frequency parameter. Use cursor UP/DOWN button to toggle between C O N F I G U R AT I O N SWITCH ON / OSD PICTURE / SOUND > > SECURITY CONTROL VIDEO ADJUSTMENT F E AT U R E S > > > • HORIZONTAL - adjust the horizontal placement of the picture. • VERTICAL - adjust the vertical placement of the picture. • PHASE - eliminate the horizontal interfering lines.
User Manual BDL3231/BDL4231 5.2 PICTURE FORMAT The pictures you receive may be transmitted in 16:9 format (widescreen) or 4:3 format (conventional screen). 16:9 pictures sometimes have a black band at the top and bottom of the screen (letterbox format). This function allows you to optimize the picture display on screen. Note: In PC-A mode, only WIDESCREEN and 4:3 formats are supported. WIDESCREEN This mode restores the correct proportions of pictures transmitted in 16:9 using the full screen display.
User Manual BDL3231/BDL4231 6. INPUT MODE VGA Resolution Standard Active Resolution Resolution H Pixels V Lines Refresh Rate Pixel Rate Aspect Ratio Stand for Mode VGA 640 480 60 Hz 72 Hz 75 Hz 25.175 MHz 31.5 MHz 31.5 MHz 4:3 Video Graphic Array WVGA 848 480 60 Hz 33.75 MHz 16:9 Wide Video Graphic Array SVGA 800 600 Super VGA 1024 768 4:3 Super VGA Extended Graphic Array WXGA 1360 768 40 MHz 50 MHz 49.5 MHz 65 MHz 75 MHz 78.5 MHz 84.
User Manual BDL3231/BDL4231 7. TECHNICALS SPECIFICATIONS Display Specifications Item 32” LCD Screen Size (Active Area) 31.51” (697.685 (H) x 392.256 (V) [mm]) Aspect ratio 16:9 Number of pixels 1366 (H) x 768 (V) Pixel pitch 0.170 (H) x 0.170 (V) [mm] Displayable colors 16.7 M colors Brightness 500 cd/m2 Dynamic contrast ratio 3000:1 Viewing angle 178 degrees 42” LCD 42.02” (930.25 (H) x 523.01 (V) [mm]) 16:9 1366 (H) x 768 (V) 0.227 (H) x 0.277 (V) [mm] 16.
User Manual BDL3231/BDL4231 General Item Power Supply Power Consumption (Max) Dimension [W x H x D mm] With Stand Without Stand Weight With Stand Without Stand Specifications 32” LCD 42” LCD AC 100V ~ 240V, 50/60 Hz 115W 190W 792.5 x 531.5 x 205 mm 792.5 x 487.0 x 115 mm 1021.8 x 662.8 x 250 mm 1021.8 x 615.5 x 129 mm 13.21 Kg 12.67 Kg 21.
User Manual BDL3231/BDL4231 8. CLEANING AND TROUBLESHOOTING 8.1 CLEANING Cautions When Using the Display • Do not bring your hands, face or objects close to the ventilation holes of the display. Top of display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes. Burns or personal injuries may occur if any body parts are brought too close.
User Manual BDL3231/BDL4231 8.2 TROUBLESHOOTING Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 2. The main power switch on the back of the monitor is not switched on. 3. The selected input has no connection. 4. The monitor is in standby mode in VGA mode. 1. Plug in the power cord. 2. Make sure the power switch is switched on. 3. Connect a signal connection to the monitor.
