EN TYPE Nr.
User Manual BDH4251V/00 EN Safety Precautions DISPOSAL OF USED ELECTRICAL & ELECTRONIC EQUIPMENT The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical & electronic equipments waste. In the European Union and Other European countries which there are separate collection systems for used electrical and electronic product.
User Manual BDH4251V/00 During Use Do not open the cover (or back) because high voltage is present within the Monitor enclosure. Never push any kind of objects into this product through openings at the back of Monitor. It may cause electric shock. It may cause fire or electric shock. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Do not allow children to play or hang on the Monitor.
User Manual BDH4251V/00 EN Safety Precautions Power Always obey all safety messages. • All the safety and operating instructions should be read before the product is operated. CAUTION You can be injured, or this product or any other of your property can be damaged if you don’t follow instructions. When moving your Monitor, remove the power plug, and cables, and be sure to move it by using two people.. Do not touch the power plug with wet hands when plugging or unplugging it into the wall socket.
User Manual BDH4251V/00 During Use The plasma display panel consists of fine cells. Although the panels are produced with more than 99.9 percent active cells, there may be some cells that do not produce light or remain lit. Do not wipe the Monitor using a cloth damped with chemicals (benzene, thinners, etc.). Do not place heavy objects or heat sources on the power cord. The Monitor appearance may be marred. (Unplug the power plug and wipe with soft cloth.
User Manual BDH4251V/00 EN Checking Accessories Note Check to be sure that the following items are packed with your Plasma panel. Supplied Accessories 1 UNIT 1 UNIT Ferrite Core 1 UNIT R-48F01 STILL TIMER VOL MENU Batteries MUTE VOL RECALL SWAP POSITION COLOR TEMP PIP PIP SOURCE AV P.MODE PICTURE FMT S.MODE S.
User Manual BDH4251V/00 Assembling the plasma display stand .Open and take out the stand from the .Slide the stand under the plasma display like the picture below. box and remove wrapper. AV2 OPTICAL OUTPUT DIGITAL AUDIO AV1 INPUT ONENT COMP ? AUDIO PC INPUT PC AUDIO HDMI .Use the enclosed 4 M5 screws to secure the assembled stand.
User Manual BDH4251V/00 EN CONTENTS PREPARATION 2 • Safety Precautions 6 • Checking Accessories 7 • Assembling the plasma display stand 10 • Panel Controls 11 • Remote Control CONNECTION 13 • 15 • 17 • 19 • 21 • 23 • 25 • 27 • 29 • Watching Digital Broadcasts Watching Cable Broadcasts Watching Satellite Broadcasts Watching a DVD Image Watching a VCR Image Watching a Camcorder/Game Console Image Connecting PC(15Pin D-Sub) Connecting HDMI Connect with the Dolby Digital AMP.
User Manual BDH4251V/00 EN Panel Controls Front Panel, Rear Panel having the same * Items exactly the same way.
User Manual BDH4251V/00 Rear HDMI INPUT PC PC AUDIO COMPONENT INPUT AV1 AV2 ? OPTICAL OUTPUT DIGITAL AUDIO AUDIO MENU HDMI INPUT PC AUDIO INPUT MOVE MENU MOVE PC INPUT (15 pin D-sub) PC OUTPUT (15 pin D-sub) HDMI INPUT PC AUDIO PC PC OUT COMPONENT INPUT AV1 AV2 DIGITAL AUDIO OPTICAL VIDEO AUDIO AUDIO SERVICE External Speaker Power SCART, A/V INPUT/OUTPUT.
User Manual BDH4251V/00 Remote Control Note • Use two “AAA” batteries. • Be sure to use replacement batteries of the same type as the original ones. • The life of a battery depends on how much it has been used. ) indicates the page in which * The number in ( the function of each button is explained in detail. 35 PICTURE FMT button Power button 13 Adjusts the size of the screen (Normal, 16:9, etc.
User Manual BDH4251V/00 Installing the batteries in your remote control 1 Open the battery compartment on the back of the remote control. 2 Install two AAA-size batteries (not included) as shown. Make sure the “+” and “-” terminals are oriented correctly. 3 Replace the cover. When using remote control • Be sure not to allow the remote control to drop or to become wet. • Keep it away from hot or moist locations.
User Manual BDH4251V/00 Watching Digital Broadcasts EN Watching Digital Broadcasts • To watch digital broadcasts: - Purchase a separate Digital Broadcasting Receiver(SET-TOP BOX) - Connect the PDP to a Digital Broadcasting Receiver as shown right. 1 Connect a Digital Broadcasting Receiver to the PDP • Prepare A/V cables. • Connect the cables from the digital TV Receiver output terminal to the PDP(Component ) input terminal. • When connecting the cables, be sure to match the cable colours.
User Manual BDH4251V/00 3 Input Select AV • Select [Component] by pressing the "AV" button of the remote control or using the button of the PDP unit. • When you press the “AV”button, you will see the OSD as shown. you can move using “ “and select desire input mode with “ “ button.
User Manual BDH4251V/00 EN Watching Cable Broadcasts Watching Cable Broadcasts 1 Connect a Cable Broadcasting Receiver to the PDP. • Prepare the A/V cable. • Connect the receiver(Output) to PDP(Video Input) as shown below. • To watch cable broadcasts, subscribe to your local cable TV broadcasting, and then connect a cable Broadcasting Receiver to the PDP as shown right. HDMI INPUT PC PC AUDIO COMPONENT INPUT AV2 OPTICAL OUTPUT DIGITAL AUDIO AUDIO MENU P.MODE PICTURE FMT AV1 ? MOVE AV S.
User Manual BDH4251V/00 3 Input Select AV • Select [AV 1(Scart), AV 2(Scart) or AV3(S-Video)] by pressing the [AV] button of the remote control or the in keypad of the PDP unit. • When you press the “AV”button, you will see the OSD as shown. you can move using “ “and select desire input mode with “ “ button.
User Manual BDH4251V/00 EN Watching Satellite Broadcasts Watching Satellite Broadcasts • To watch satellite broadcasting, subscribe to Digital Satellite Broadcasting, then connect the satellite Broadcasting Receiver to the PDP as shown right. 1 Connect a Satellite Broadcasting Receiver to the PDP. • Prepare the A/V cable. • Connect the receiver(Output) to PDP(Video Input) as shown below. • When connecting to an external AV source, be sure to match the colours.
User Manual BDH4251V/00 3 Input Select • Select [AV 1(Scart), AV 2(Scart) or AV3(SVideo)] by pressing the [AV] button of the remote control or the in keypad of the PDP unit. • When you press the “AV”button, you will see the OSD as shown. you can move using “ “and select desire input mode with “ “ button.
User Manual BDH4251V/00 Watching a DVD Image EN Watching a DVD Image • Component Input is set to 480i/576i and 480p/576p mode. • Connect the cable from the DVD Video output (Y, Pb/Cb, Pr/Cr) to the Component Input at the back of PDP, and connect the cable from DVD audio output (Left, Right) to the Audio Input at the back of PDP. P.MODE PICTURE FMT S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP SWAP • Prepare the AV cable. • Connect the DVD(Output) to the PDP(Component or Video Input) as shown below.
User Manual BDH4251V/00 3 Input Select AV • Select [Component, AV1(Scart), AV2(Scart) or AV3(S-Video)] by pressing the [AV] button of the remote control or the in keypad of the PDP unit. • When you press the “AV”button, you will see the OSD as shown. you can move using “ “and select desire input mode with “ “ button.
User Manual BDH4251V/00 Watching a VCR Image EN Watching a VCR Image 1 Connect a VCR to the PDP. • Prepare the AV cable. • Connect the Video(Output) to PDP(Video Input) as shown below. • Video can use either the video terminal or the S-video terminal. HDMI INPUT PC PC AUDIO COMPONENT INPUT AV1 AV2 ? OPTICAL OUTPUT DIGITAL AUDIO AUDIO MENU P.MODE PICTURE FMT S.MODE S.
User Manual BDH4251V/00 3 Input Select AV • Select [AV 1(Scart), AV 2(Scart) or AV 3(S-Video)] by pressing the [AV] button of the remote control or the keypad of the PDP unit. in • When you press the “AV”button, you will see the OSD as shown. you can move using “ “and select desire input mode with “ “ button.
User Manual BDH4251V/00 EN Watching a Camcorder/Game Console Image Watching a Camcorder/Game Console Image • Enjoy images recorded by camcorder or the game console after connecting to the PDP. 1 Connect a Camcorder/Game Console to the PDP. • Prepare the AV cable. • Connect the Video(Output) to the PDP(Video Input) as shown below. • When connecting to an external AV source, be sure to match the colours. HDMI INPUT PC PC AUDIO COMPONENT INPUT AV1 AV2 ? OPTICAL OUTPUT DIGITAL AUDIO AUDIO MENU P.
User Manual BDH4251V/00 3 Input Select AV • Select [AV 1(Scart), AV 2(Scart) or AV 3] by pressing the [AV] button of the Remote Control or the in keypad of the PDP unit. • When you press the “AV”button, you will see the OSD as shown. you can move using “ “and select desire input mode with “ “ button. AV 1 Picture AV 2 AV 3 Sound Component PC Screen HDMI Feature Input Move 4 Select MENU Exit Select Function • Select the function by using the remote control of camcorder or game console.
User Manual BDH4251V/00 EN Connecting PC(15pin D-sub) Connecting PC • This product supports resolutions of VGA, SVGA, XGA, WXGA, SXGA. • Before connecting a PC to the PDP, be sure to adjust the resolution of the PC. P.MODE PICTURE FMT 1 Before Connecting to the PDP, Set the Resolution of the PC. • Go to SETUP-CONTROL PANEL-DISPLAY PROPERTIES in Window Screen of the PC. • Choose the SETTINGS tab in the DISPLAY menu.
User Manual BDH4251V/00 3 Press the Power Buttons. • Turn on the PDP and the PC. 4 Input Select AV • Select [PC] by pressing the AV button of the remote control or PDP unit. • When you press the “AV”button, you will see the OSD as shown. you can move using “ “ and select desire input mode with “ “ button. AV 1 Picture AV 2 AV 3 Sound Component PC Screen HDMI Feature Input Move Select MENU Exit • N.B. : You cannot select PC if the picture in picture mode is on.
User Manual BDH4251V/00 Connecting HDMI EN Connecting HDMI • This product supports resolution of VGA, SVGA, XGA, SXGA • Before connecting a PC to the PDP, be sure to adjust the resolution of PC. • This product is supported by Plug and Play only at HDMI. • This Plasma unit is compliant with HDMI 1.1 version. 1 Connect the HDMI to the PDP. • Prepare the HDMI cable. • Connect the HDMI(Output) to the PDP(Input) as shown below.
User Manual BDH4251V/00 2 Press the Power Buttons. • Turn on the PDP and DVD or Game console. 3 Input Select AV • Select [HDMI] by pressing the AV button of the remote control or the button on the PDP unit. • When you press the “AV”button, you will see the OSD as shown. you can move using “ “ and select desire input mode with “ “ button. AV 1 Picture AV 2 AV 3 Sound Component PC Screen HDMI Feature Input Move Select MENU Exit NOTES: HDMI input port receives only digital signal.
User Manual BDH4251V/00 EN Connect with the Dolby Digital AMP. If you connect the optical output to a Dolby digital AMP, you can listen to better sound.
User Manual BDH4251V/00 PC and HDMI Input Resolution Available in PDP • Depending on graphic card, problems like no signal detected or line noises can happen. If these problems happen, contact the graphic card company for help. Resolution 59.940 Remark DOS HDMI O PC O 37.861 72.809 VESA O O 37.500 75.000 VESA O O 31.469 70.087 IBM O O 35.156 56.250 VESA O O 37.879 60.317 VESA O O 1024 x 768 48.363 60.004 VESA O O 1280 x 1024 63.981 60.
User Manual BDH4251V/00 Selecting Picture Mode EN Selecting Picture Mode 1 Selecting Picture Mode P.MODE • Select the Picture mode that is appropriate depending on the kinds of pictures, you enjoy. 2 P.MODE PICTURE FMT • Press the [P.MODE] on the remote control. • While pressing the [P.MODE] for the first time, the current picture mode will be displayed. Each Press of the Button Will Select One of Four Picture Modes. P.MODE AV S.MODE S.
User Manual BDH4251V/00 Customizing Picture EN 1 Press the MENU Button. Customizing Picture • The MENU shown below will display on the screen. Dynamic Mode Picture Sound Brightness 40 Contrast 80 Sharpness 8 Colour Screen 60 Colour Temp N. R. • You can adjust the colour tone and brightness to your preference. Normal On Feature Input Select Move MENU Exit P.MODE PICTURE FMT 2 Press the Button. • After selecting [Picture] by the “ ” buttons, press the “ ” button.
User Manual BDH4251V/00 4 Select User Mode Adjustments • While you are in [Picture Mode – User], press the “ ” buttons to select a specific adjustment item. MENU VOL VOL User Mode Picture Sound Brightness 50 Contrast 50 Sharpness 8 Colour Screen 50 Colour Temp N. R. Normal On Feature Input Move 5 Select MENU Exit Picture Condition Adjustments • Press the “ ” buttons to adjust the picture of your preference. • N.R. functions the noise reduction.
User Manual BDH4251V/00 6 Press the “COLOR TEMP” button on the remote control. COLOR TEMP • Pressing the “COLOR TEMP” button first time will display the current setting for COLOR TEMP. • Each time you press the button, a different color temp appears. The sequence used is as follows : Normal Warm User Mode Picture Sound Cool Brightness 50 Contrast 50 Sharpness 8 Colour Screen 50 Colour Temp N. R.
User Manual BDH4251V/00 Adjusting Screen EN Adjusting with Picture FMT button 1 Press the PICTURE FMT Button. PICTURE FMT • You can adjust screen size or aspect ratio as desired. • The current screen size will be displayed on the screen. • Each time you press the PICTURE FMT button on the remote control, a different screen size appears. The sequence used is as follows in case of AV1,AV2 and AV3 modes : Auto P.MODE PICTURE FMT 16:9 LB(16:9) AV LBS(14:9) S.MODE S.
User Manual BDH4251V/00 Adjusting Screen in the MENU 1 Press the MENU Button. • The MENU screen as shown below will appear. Dynamic Mode Picture Sound Brightness 40 Contrast 80 Sharpness • You can adjust the screen in the menu. 8 Colour Screen Adjusting Screen 60 Colour Temp N. R. Normal On Feature Input Select Move MENU Exit P.MODE PICTURE FMT AV S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE SWAP RECALL MENU 2 Press the “ ” Button.
User Manual BDH4251V/00 Adjusting Screen in the MENU Screen Mode Function This function is same to the [Picture FMT] of remote controller. 3 Press the Volume “ MENU VOL VOL ” Buttons. • Press the Volume “ ” buttons to enter the sub menu “Screen”. • While you are in ‘Screen’ menu, press the “ ” or “ ” button to select a desired item, and then, adjust the value by pressing the “ ” or “ ”. 16 : 9 Mode P.MODE PICTURE FMT AV S.MODE S.
User Manual BDH4251V/00 EN 1 Watching a STILL Image Press the “STILL” Button. STILL • If you wish to freeze a picture, press the “STILL” button. You can still hear the sound. • Press “STILL” button again to cancel the “STILL” function. Watching a Still Image • You can view still images with this function. However, displaying the same images such as still images for a long time may cause image burn. Still P.MODE PICTURE FMT AV S.MODE S.
User Manual BDH4251V/00 EN Watching Two Pictures Simultaneously • PIP (Picture-in-Picture) and P-by-P(Picture-by-Picture) modes allow users to watch two pictures simultaneously. Screen Adjustment of the Sub-picture 1 • Alpha Blend of the sub-picture can be adjusted on Screen Menu of OSD. • Alpha Blend is only available in PIP mode. Engaging PIP mode PIP POSITION C PIP SOURCE SWAP • Press the ‘PIP’ button once on the remote control to engage the Picture-in-Picture mode.
User Manual BDH4251V/00 Watching Two Pictures Simultaneously 5 Select the Input Source PIP SOURCE • Various signal sources can be displayed within the sub-picture under PIP mode. • Once the PIP mode is on, you may change the input source of the sub-picture by pressing the 'SOURCE' button. • Pressing the 'SOURCE' button repeatedly will cycle through following order. AV1 AV2 AV3 P.MODE PICTURE FMT AV S.MODE S.
User Manual BDH4251V/00 Selecting Sound Mode EN Selecting Sound Mode 1 Select “SOUND MODE”. • Press the “S.MODE” on the remote control. • While pressing the “S.MODE” for the first time, the current sound mode will be displayed. S.MODE • Enjoy various sound modes by selecting your favourite Sound Mode depending on the kinds of moving pictures. P.MODE PICTURE FMT S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE SWAP 2 AV Every Press of the Button Changes Modes. S.
User Manual BDH4251V/00 Customising Sound Mode EN 1 Press the MENU Button. • The MENU screen as below will be displayed. Dynamic Mode Picture Sound Brightness 40 Contrast 80 Sharpness • This feature allows the user to adjust for their preference. 8 Colour Screen Customising Sound Mode 60 Colour Temp Normal N. R. On Feature Input Select Move Exit MENU P.MODE PICTURE FMT 2 Press the “ ” Button.
User Manual BDH4251V/00 4 Select the Effect Mode. S.EFFECT P.MODE PICTURE FMT AV S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP • Select [Effect] by pressing the “ ” buttons, then select the desire sound effect by pressing the “ ” button. • [Effect]: Used to emphasize stereo effect. • BBE is the sound enhancement clarifying the sound and outputs finest quality. And M.Voice is the function that you can hear clearer voice. • Effect Mode also can be selected by pressing “S.
User Manual BDH4251V/00 Customizing Sound Mode 5 Select the Sound Mode. • Select the Sound Mode by pressing the “ adjust it by pressing the “ ” buttons. ” buttons, then MENU VOL VOL Balance Picture Sound 0 Off Effect AVC Off Mode Normal Equalizer Screen Feature Input Move Adjust MENU Exit P.
User Manual BDH4251V/00 Selecting INPUT SIGNAL EN INPUT SIGNAL • Used to select INPUT signal of external device connected to the PDP. P.MODE PICTURE FMT 1 Press the Input Signal Selecting Button. AV • Press the “AV” button on the remote control, or select the desire input signal using Keypad of the PDP unit. • When you press the “AV”button, you will see the OSD as shown. you can move using “ “and select desire input mode with “ “ button. AV 1 AV Picture S.MODE AV 3 S.
User Manual BDH4251V/00 EN Checking the Current Input Signal - Press the [RECALL] button on the remote control, then displays basic informations of the current input signal, Under this state, pressing the [RECALL] button once more, additional informations about the current input signal will be displayed on the OSD. 1 Checking the Current Input Signal Press the RECALL Button. • Press the [RECALL] button on the Remote Control.
User Manual BDH4251V/00 EN MENU Background, Language and Child Lock Setting Selecting Languages 1 Press the MENU Button. • The MENU screen will be displayed as below. Dynamic Mode • Used to select the translucent level of MENU background and language used in MENU. Picture Sound Brightness 40 Contrast 80 Sharpness 8 Colour Screen 60 Colour Temp Normal N. R. On Feature Input Select Move P.MODE PICTURE FMT AV S.MODE S.
User Manual BDH4251V/00 MENU Background, Language and Child Lock Setting 4 Select LANGUAGE by using the “ ” Button. • Select [Language] by using the “ ” button. • Every press of the “ ” button while you are in the [Language] mode would cycle through the different languages.
User Manual BDH4251V/00 EN MGDI Plus (Meta Genuine Digital Image) MGDI Plus is the image enhancement technology of which provides more clear, realistic, and delicate images. MGDI Plus MGDI Plus function can not be used In PC and HDMI modes. 1 Press the MENU Button. • The MENU screen will be displayed as below. Dynamic Mode Picture Sound Brightness 40 Contrast 80 Sharpness 8 Colour Screen 60 Colour Temp Normal N. R. On Feature Input P.MODE PICTURE FMT S.MODE S.
User Manual BDH4251V/00 3 MGDI Plus Setting • Enter the sub Menu by using the “ ” button. • Select the [MGDI Plus] by pressing the “ ” button. • You can select [MGDI Plus] On or Off mode by using the “ ” button. P.MODE PICTURE FMT Background Picture Sound Screen AV 10 Language English Child Lock Off MGDI plus On Auto Power Off S.MODE S.
User Manual BDH4251V/00 Auto Power Setting POWER/STANDBY Indicator Front panel LED lights • When the AC power is on : Green. • When the AC power is in the standby mode : Red. 1 Auto Power Setting ” button • Select the [Auto Power] by pressing the “ from [Feature]. • You can select [Auto Power] ON and OFF mode by using the “ ” button.
User Manual BDH4251V/00 Time Setting 1 EN Press the MENU Button. • The MENU screen will be displayed as below. Dynamic Mode Picture Sound Brightness 40 Contrast 80 Sharpness 8 Colour Screen 60 Colour Temp N. R. Normal On Feature P.MODE PICTURE FMT Input Select Move 2 MENU AV Exit Select Feature S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE • Select [Feature] by the “ SWAP RECALL ”button.
User Manual BDH4251V/00 Time Setting Time Setting • The “Current time” must be set up ahead of setting up other time memories. P.MODE PICTURE FMT 4 Off-Time setting MENU VOL VOL • Select Functions by pressing the “ ” button. First, set [Clock]- current time, and then You can setup off-time. • [Clock] : Adjust the desired hour and minute with “ ” button. • [Off Time] Setting methods are same as [Clock] setting method. • [Off Timer] : Setting [On] and [Off] of each Timer. Time Setting AV Picture S.
User Manual BDH4251V/00 Image Sticking Minimisation(ISM) EN 1 Press the MENU Button. • The MENU screen will be displayed as below. ISM Dynamic Mode Picture Sound Brightness 40 Contrast 80 Sharpness Colour Screen • Image sticking Minimisation • Displaying a still image for a long time causes part image sticking on the screen. • The ISM function minimises this effect. 8 60 Colour Temp Normal N. R. On Feature Input Select Move 2 Press the “ MENU Exit ” Button.
User Manual BDH4251V/00 Image Sticking Minimisation(ISM) 4 Select Functions. • Every press of the “ ” button after select function by the “ ” button would switch between ON/OFF. ISM Pixel Shift Low Bright Image Invert Picture Sound PIXEL SHIFT P.MODE PICTURE FMT AV S.MODE S.
User Manual BDH4251V/00 Reset factory setting EN 1 Press the MENU Button. Back to Initialization • The MENU screen will be displayed as below. Dynamic Mode Picture Sound Brightness 40 Contrast 80 Sharpness 8 Colour Screen 60 Colour Temp Normal N. R. • You can restore the values of the adjustment setting made in the MENU back to factory settings. On Feature Input Select Move MENU Exit P.MODE PICTURE FMT 2 AV S.MODE S.
User Manual BDH4251V/00 Reset factory setting 3 INITIALIZATION • Enter the sub Menu by using the “ ” button. • Select the [Initialize] by pressing the “ ” button, then press the “ ” button. • A confirmation message will be displayed. • To perform initialization, press the “ ” button after selecting [YES] by the “ ” button. • To return to MENU, press "MENU" button.
User Manual BDH4251V/00 EN 1 Setting Sleep Timer Press the “TIMER” Button. TIMER • Press the “TIMER” button on the Remote Control. • Pressing the “TIMER” button first time will display the current setting for Sleep Timer. • To cancel the Sleep Timer, press the “TIMER” button to select ‘Off’. Setting Sleep Timer • Sleep Timer turns the PDP off after a preset time. P.MODE PICTURE FMT S l e e p Ti m e r O ff AV S.MODE S.
User Manual BDH4251V/00 SPECIFICATIONS DISPLAY UNIT Diagonal Size 106cm (42”) Screen Aspect Ratio 16 : 9 System PAL B/G, ,D/K, I/I, SECAM B/G, D/K, L/L’ Display Resolution HD Panel : 1024(H) X 768(V) dots Pixel Pitch HD Panel : 0.90(H) X 0.676(V) mm Dimension 1039(W) X 628(H) X 88(D) mm (without Stand) 1039(W) X 716(H) X 280(D) mm (with Stand) Weight(without stand) 30.
