Philips Business Solutions EN User Manual TYPE Nr.
User Manual BDH4222V/BDH4223V TABLE OF CONTENTS 1 IMPORTANT NOTES AND SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Warnings and Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Information for Users in the UK . . . . . . . . . . . .
User Manual BDH4222V/BDH4223V 11 CLEANING AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 11.1 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 11.2 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 12 LIMITED WARRANTY (EUR). . . . . . .
User Manual BDH4222V/4223V 1. IMPORTANT NOTES AND SAFETY INSTRUCTIONS 1.1 SAFETY INSTRUCTIONS ■ Read and keep these instructions. ■ Heed all warnings. ■ Follow all instructions. ■ Do not use this apparatus near water. ■ Disconnect from the electric outlet before cleaning. Do not use liquid or aerosol cleaners. Clean only with a slightly damp cloth. ■ Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions.
User Manual BDH4222V/4223V ■ Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. ■ Unplug this apparatus during lightning storms or when unused for long periods of time. ■ Refer all servicing to qualified service personnel.
User Manual BDH4222V/4223V ■ Outdoor Antenna Grounding: ● If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges. ● Section 810 of the National Electric Code, ANSI/NFPA No.
User Manual BDH4222V/4223V WARNING To reduce the risk of fire or electric shock, this appliance must not be exposed to rain or moisture, and objects filled with liquids, such as vases, must not be placed upon this apparatus. CAUTION To prevent electric shock, match wide plug blade to wide slot, and fully insert. ATTENTION Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la bome correspondante de la prise et pousser jusqu’au fond. 1.
User Manual BDV4222V/BDH4223V 2. REGULATORY NOTICE FCC Statement The Federal Communications Commission Radio Frequency Interference Statement includes the following warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
User Manual BDV4222V/BDH4223V 6
User Manual BDH4222V/4223V 3. PRODUCT FEATURES Quiet Fanless Operation This plasma display is built without any fans for quiet operations suitable for home theater related applications. Advanced Digital Image Processing Advanced digital processor with adaptive motion de-interlacing converts all 15KHz signals into progressive scan for a brighter, flicker free image.
User Manual BDH4222V/4223V DVI Digital Video Interface with HDCP(High-Bandwidth Digital Content Protection) Standard DVI interface supports the latest in digital video preipherals equipped with DVI v HDCP digital video output(s). This means that digital content can now pass from sources such as set-top-box, directly to this display without digital-to analog conversion that erodes video quality. Direct digital-to digital connection ensures the abolute best in the video quality.
User Manual BDH4222V/4223V 4. UNPACKING AND INSTALLATION 4.1 UNPACKING ■ The monitor is packed in a carton, together with the standard accessories. Any other optional accessories will be packed separately. ■ The weight of the monitor is approx 36kg. Due to the size and weight it is recommended to move it by 2 people. ■ The protectiev glass and the glass substrate are inatalled on the front of the product. Since both glasse can be brokn and scraped easily the product has to be handled with care.
User Manual BDH4222V/4223V 4.3 INSTALLATION NOTES ■ Due to the high power consumption, always use the plug exclusively designed for this product. If an extended line is required, please consult your service agent. ■ The product should be installed on a flat surface to avoid tipping.The distance between the back of the product and the wall should be maintained for proper ventilation.
User Manual BDH4222V/4223V 5. PARTS & FUNCTIONS 5.1 FRONT VIEW 2 3 4 1 5 6 1. Status LED ● Not Illumated = No AC Power detected If the main power switch (rear of panel) is turned off, this LED will not illuminate. ● Orange = Standby (Power OFF) with AC power detected The LED will illuminate in orange color if the monitor is shut off but the main power cord is plugged into the back of the unit. ● Solid Green = Power ON 2. Power (Standby) Button Turns power on/off from standby mode.
User Manual BDH4222V/4223V 5.
User Manual BDH4222V/4223V 5.3 1 1 3 1 2 REMOTE CONTROL 1. Standby Power On/Off Push this button to turn on the monitor from Standby mode. Push it again to turn it off to Standby mode. 2. Number Keypad Use number keypad to select the TV channel you want to watch. (Only applicable with TV tuner installed.) 3. Sound Mute On/Off 4. QuickView Recalls the last TV channel watched. 1 4 5. Volume +/Turns volume up or down. 5 1 6 1 6. Menu Activates the OSD menu. 7. Recall Recalls Factory default settings.
User Manual BDH4222V/4223V 1 14. Closed Captioning Turns on Closed Captioning Mode. 15. V-Chip NOT SUPPORTED. 16. SURROUND 17. WIDE Toggles between various aspect ratio settings. (See page 34) 18. Discrete Power ON/OFF Press OFF to send monitor into standby mode. Press ON to power on from standby mode. (See page 34) 19. Direct Input Selection Keys Directly change input signal selection by pressing the appropriate key.
User Manual BDH4222V/4223V 5. PARTS & FUNCTIONS 5.1 FRONT VIEW 2 3 4 1 5 6 1. Status LED ● Not Illumated = No AC Power detected If the main power switch (rear of panel) is turned off, this LED will not illuminate. ● Orange = Standby (Power OFF) with AC power detected The LED will illuminate in orange color if the monitor is shut off but the main power cord is plugged into the back of the unit. ● Solid Green = Power ON 2. Power (Standby) Button Turns power on/off from standby mode.
User Manual BDH4222V/4223V 5.
User Manual BDH4222V/4223V 5.3 1 1 3 1 2 REMOTE CONTROL 1. Standby Power On/Off Push this button to turn on the monitor from Standby mode. Push it again to turn it off to Standby mode. 2. Number Keypad Use number keypad to select the TV channel you want to watch. (Only applicable with TV tuner installed.) 3. Sound Mute On/Off 4. QuickView Recalls the last TV channel watched. 5. Volume +/Turns volume up or down. 1 4 6. Menu Activates the OSD menu. 1 5 6 1 7. Recall Recalls Factory default settings. 8.
User Manual BDH4222V/4223V 1 14. Closed Captioning Turns on Closed Captioning Mode. 15. V-Chip NOT SUPPORTED. 16. SURROUND 17. WIDE Toggles between various aspect ratio settings. (See page 34) 18. Discrete Power ON/OFF Press OFF to send monitor into standby mode. Press ON to power on from standby mode. 19. Direct Input Selection Keys Directly change input signal selection by pressing the appropriate key.
User Manual BDH4222V/BDH4223V 6. CONNECTIONS TO EXTERNAL EQUIPMENT 6.1 CONNECTING A DVD PLAYER Using Component Video Input 1 Connect the green-colored (labeled as "Y") jack of the DVD to the green-colored "Y1" jack of the monitor. 2 Connect the red-colored (labeled as "PR" or "CR") jack of the DVD to the red-colored "PR1/CR1" jack of the monitor. 3 Connect the blue-colored (labeled as "PB" or "CB") jack of the DVD to the blue-colored "PB1/CB1" jack of the monitor.
User Manual BDH4222V/BDH4223V 6.2 CONNECTING A HDTV DECODER SET-TOP BOX Using Component Video Input 1 Connect the green (labeled as "Y") jack of the HDTV Set-top box to the green "Y1" jack of the monitor. 2 Connect the red (labeled as "PR" or "CR") jack of the HDTV Set-top box to the red "PR1/CR1" jack of the monitor. 3 Connect the blue (labeled as "PB" or "CB") jack of the HDTV Set-top box to the blue "PB1/CB1" jack of the monitor.
User Manual BDH4222V/BDH4223V 6.3 CONNECTING A VCR Using S-Video Input 1 Connect the S-Video (4-pin DIN) connector of the VCR to the "S-VIDEO" input of the monitor. 2 Connect the red (R) and white (L) audio jacks of the VCR to the R and L audio-in jacks located next to the S-VIDEO connector. or Using Composite Input 1 Connect the "yellow" (video) out connector of the VCR to the yellow "Video 1" input of the monitor.
User Manual BDH4222V/BDH4223V 6.4 EXTERNAL AUDIO CONNECTION Connecting External Amplified Speakers This monitor can be connected to an external set of amplified speakers using the AUDIO OUT jacks located on the back of the monitor. In addition, this monitor is equipped with a small 3.5 mm phono style plug for remote turn-on applications that will automatically send a remote turn-on/off signal to the external amplified speakers.
User Manual BDH4222V/BDH4223V 6.5 CONNECTING A PC Using RGB or DVI Video Input 1 For most PC's, connect the 15-pin D-Sub RGB connector of the PC to the RGB-IN connector of the monitor. If you have a PC that is equipped with a DVI (Digital Visual Interface), you may connect the PC DVI connector from the PC to the DVI-In connector of the monitor. 2 Connect the red (R) and white (L) audio jacks of the PC to the R and L jacks of the monitor.
User Manual BDH4222V/BDH4223V 6.6 RS-232 REMOTE CONTROL CONNECTIONS RS-232 Serial Terminal Overview This monitor is equipped with an RS-232 serial terminal for using the monitor with computer controls. The RS-232 serial terminal conforms to the RS-232C interface specification. The computer requires a software application (such as programming language software) which allows the computer to send and receive control data that supports the communications parameters listed below.
User Manual BDH4222V/BDH4223V ■ If multiple commands are transmitted, make sure to wait for the response signals of the monitor before sending the next command. The following are response command signals: Response 80 70 80 71 80 72 Error MODE ERROR ITEM ERROR FORMAT ERROR Command Parameters These remote control commands are available to send to the monitor using RS-232.
User Manual BDH4222V/BDH4223V 26
User Manual BDH4222V/4223V 7. BASIC FUNCTIONS 7.1 POWERING ON / OFF Make sure the monitor is plugged into the wall outlet and the main AC switch located in the rear of the monitor is switched to ON position. If the power is plugged in and the AC switch is on, the STATUS LED will illuminate in orange color. Using Front Panel or Remote Control 1 Press the POWER button on the front panel or the remote control. => The monitor will now turn on after a brief pause.
User Manual BDH4222V/4223V 7.2 SELECTING SIGNAL SOURCE Using Front Panel or Remote Control 1 Press the INPUT key on the front panel of the monitor, or press the INPUT key on the remote control. ● Pressing the INPUT key will cycle the monitor thru all available input signal sources in the following order: (S) Notes: Some of the Direct Input Selection keys will not be applicable for this monitor. For AV mode, use AV1. For S-Video, use AV2.
User Manual BDH4222V/4223V 7.4 UNDERSTANDING HDTV What is Digital Television or DTV? Digital TVs are televisions that can receive and display digital television broadcasts sent using any one of three following categories: HDTV (High Definition TV), EDTV (Enhanced Digital TV), and SDTV (Standard Definition TV). What is the Difference Between HDTV, EDTV, and SDTV? HDTV, EDTV, and SDTV are three grades of televison or monitors.
User Manual BDH4222V/4223V How is a HDTV/EDTV/SDTV Different from a HDTV/ EDTV/SDTV Monitor? In order to receive digital broadcasts, a digital "receiver" or "decoder" must be used to receive and decode digital broadcast signals. Digital decoders can be built into the monitor itself or they may come in the form of a set-top box that is added separately to the monitor.
User Manual BDH4222V/4223V 8. ADVANCED FUNCTIONS 8.1 PICTURE-IN-PICTURE (PIP) / SIDE-BY-SIDE PICTURE (POP) Turn On PIP or POP Mode 1 Press the PIP key once on the remote control to activate in PIP mode. 2 Press the PIP again to switch to POP mode. 3 Press the PIP key sequentially will cycle between: In PIP mode, a small window is displayed in one of the four corners.
User Manual BDH4222V/4223V Changing the Input Source for Main Picture 1 Press the INPUT key or any of the DIRECT INPUT KEYS to change. Notes: ● PIP mode can only be turned on if the monitor’s input is set to: AV1, AV2 (S-Video), Component 1 and 2. If the monitor’s main input is set to RGB or DVI, the PIP and POP will not function.
User Manual BDH4222V/4223V POP options: ■ POP On/Off ■ Input Source Selection ■ Screen Rate (Aspect Ratio Control) When POP (Side-by-side) picture is turned on, you can change the aspect ratio for the image displayed: ● Choose FULL to show a full screen image. The displayed image may appear distorted because the monitor has to manipulate the image so that it fits within the smaller window. ● Choose 4:3 to show an image in native 4:3 aspect ratio within the POP windows.
User Manual BDH4222V/4223V 8.2 WIDESCREEN (16:9 ASPECT RATIO) VIEWING MODES Understanding Widescreen Modes This plasma monitor is capable of displaying a widescreen image on the native 16:9 aspect ratio screen. However, not all available broadcast or video content fits perfectly in a widescreen (16:9) format resulting in unused screen space.
User Manual BDH4222V/4223V Notes: ● 4:3 and Panorama modes are not available when zoom mode is activated. ● When using Component 1 and Component 2 inputs to display 576p, 1080i or 720p, Panorama mode is not available. ● When using RGB or DVI inputs, only 4:3 and 16:9 modes are available. ● Do not stay in 4:3 mode for an extended period, as this may cause a permanent after-image to remain on your screen.
User Manual BDH4222V/4223V 8.3 ON-SCREEN DISPLAY (OSD) SETTINGS Accessing OSD Settings Menu You can set various OSD display settings from the OSD menu. 1 Press the MENU +/- keys on the remote or the front control panel. 2 Use the ADJ +/- keys to navigate to “OTHER” OSD sub-menu as displayed below. Settings menu options: ■ OSD Timeout Turns on OSD timer when set to ON. When set to ON, the OSD will automatically disappear from the display if no key action is detected for the set number of seconds.
User Manual BDH4222V/4223V 8.4 SLEEP TIMER SETTINGS Setting Sleep Timer Using OSD To set the sleep timer using the OSD screen: 1 Press the MENU +/- keys on the remote or the front control panel. 2 Use the ADJ +/- keys to navigate to “OTHER” OSD sub-menu as displayed below. 3 Use the MENU +/- keys to navigate to SLEEP 4 Use the ADJ +/- keys to set to ON. The monitor will function normally until the 1-minute mark.
User Manual BDH4222V/4223V 8.5 VARIABLE AND FIXED AUDIO OUTPUT Setting Output Using OSD You can set the type of output this monitor outputs from its audio output jack located in the rear of the monitor. By using an OSD based switch, you can easily choose between variable or fixed audio outputs. To set the audio output setting: 1 Press the MENU +/- keys on the remote control or the front control panel of the display. 2 Use the ADJ +/- keys to navigate to “SOUND” OSD sub-menu.
User Manual BDH4222V/4223V 8.6 SOUND ADJUSTMENTS Sound Adjustments Using OSD Sound adjustments are available to enhance the sound performance of the monitor. These adjustments will affect the monitor’s built-in speakers and the AUDIO OUTPUT jacks when set to “Variable”. To access sound adjustments: 1 Press the MENU +/- keys on the remote or the front control panel. 2 Use the ADJ +/- keys to navigate to “SOUND” OSD sub-menu. 3 Use the MENU +/- keys to select the various options described in this section.
User Manual BDH4222V/4223V 8.7 SIGNAL FREQUENCY INFORMATION DISPLAY Displaying Frequency of Signal This plasma monitor is capable of displaying the frequency level of the signal being displayed. To see signal frequency information: 1 Press the MENU +/- keys on the remote or the front control panel. 2 Use the ADJ +/- keys to navigate to the “OTHER” OSD sub-menu. ■ INPUT H-FREQ (KHZ) Displays the horizontal signal frequency of the signal currently displayed.
User Manual BDH4222V/4223V 8.8 PICTURE ADJUSTING 8.8.1 FOR AV Accessing Picture Adjustment Mode Various picture adjustments can be set using the Picture Adjustment OSD menu. To access the OSD menu: 1 Press the MENU +/- keys on the remote or the front control panel. NORMAL NOISE REDUCTION 2 The first menu displayed is the PICTURE menu. Make sure that the “Picture” OSD menu is displayed. 3 Use the MENU +/- keys to move up and down to choose the option you wish to adjust.
User Manual BDH4222V/4223V .Table below shows an explanation of the picture adjustments available for AV: CONTRAST Increases or decreases the level of white in the video picture. Increasing contrast will make white areas of the video picture brighter. Contrast works in conjuction with Brightness. BRIGHT Enhances the level of dark areas in the video picture such as night scenes and shadow scenes. Increasing brightness will make dark areas more visible.
User Manual BDH4222V/4223V 8.8.2 FOR COMPONENT VIDEO Accessing Picture Adjustment Mode Various picture adjustments can be set using the Picture Adjustment OSD menu. To access the OSD menu: 1 Press the MENU +/- keys on the remote or the front control panel. NOISE REDUCTION 2 The first menu displayed is the PICTURE menu. Make sure that the “Picture” OSD menu is displayed. 3 Use the MENU +/- keys to move up and down to choose the option you wish to adjust. An explanation of each adjustment is listed below.
User Manual BDH4222V/4223V SCREEN WIDTH Selects the various screen width modes. See page 34 for more information. NOISE REDUCTION Adjusts the Noice level. There are four settings to choose: OFF; lOW; MEDIUM;HIGH GEOMETRIC ADJUST Opens the Geometric Adjust sub-menu. Accessing Geometric Adjustment Mode Various geometric adjustments can be set using the Geometric Adjustment OSD menu. To access the Geometric Adjust sub-menu: 1 Press the MENU +/- keys on the remote or the front control panel.
User Manual BDH4222V/4223V 8.8.3 COLOR TEMPERATURE NORMAL V-SIZE V-CENTER H-WIDTH H-POSITION 4:3 50 50 50 FOR RGB / DVI Accessing Picture Adjustment Mode Various picture adjustments can be set using the Picture Adjustment OSD menu. To access the OSD menu: 1 Press the MENU +/- keys on the remote or the front control panel. 2 The first menu displayed is the PICTURE menu. Make sure that the “Picture” OSD menu is displayed. 3 Use the MENU +/- keys to move up and down to choose the option you wish to adjust.
User Manual BDH4222V/4223V V-CENTER Changes the vertical position of the picture. Increase to shift the picture up. Decrease to shift the picture down. H-WIDTH Changes the horizontal size of the picture. Increase to enlarge the picture size in the horizontal direction. Decrease to reduce the picture size in the horizontal direction. H-POSITION Changes the horizontal position of the picture. Increase to shift the picture to the right. Decrease to shift the picture to the left.
User Manual BDH4222V/4223V 9.
User Manual BDH4222V/4223V 48
User Manual BDH4222V/4223V 10. TECHNICAL SPECIFICATIONS 10.1 SPECIFICATIONS Display Panel Screen Size Aspect Ratio Number of Pixels Pixel Pitch Luminance 42" 16:9 1024 (Horizontal, RGB Trio) x 1024 (Vertical) 0.90 x 0.90 mm 1100 cd/m2 , at 1% white window pattern Power Source Input Voltage Input Current Inrush Current Power Consumption Stand-by & Power Save 100 ~ 240 Vac; 50/60 Hz 3.5 A 60 Ap-p/ 20 ms max. 380±10% Watts (at 110 Vac/ color bar pattern) 6 Watts max.
User Manual BDH4222V/4223V DVI Signal Type Polarity Frequency Audio Signal Digital Positive or Negative H: support to 31k ~ 63 kHz V: support to 50 ~ 85 Hz Analog 500 mVrms / more than 22 kohms Pin Assignments for Sub-D Connector (In/ Loop Out) 1 - RED 6 - RED GND 11 - GND 2 - GREEN 7 - GREEN GND 12 - SDA 3 - BLUE 8 - BLUE GND 13 - H-SYNC 4 - GND 9 - NC 14 - V-SYNC 5 - GND 10 - GND 15 - SCL Pin Assignments for 24-pin DVI Connector (Digital only)) 1 - TMDS Data 29 - TMDS Data 117 - TMDS Data 02 - TMDS Dat
User Manual BDH4222V/4223V Y/PB/PR for Component 1 and 2 Mode Resolution 1 640x480p 2 1920x1080i 3 1280x720p 4 720x576p 5 1920x1080i 6 1280x720p Max. Resolution Refresh Rate 60 60 60 50 50 50 Up to 1280x1024 Dimensions & Weight With Stand Without Speakers Width 1081 mm Height 722 mm Depth 220 mm Weight 80.5 lbs/ 36.5 kg Operating Conditions Temperature Relative Humidity Pressure Without Stand Without Speakers 1081 mm 677 mm 95 mm 77.6 lbs/ 35.
User Manual BDH4222V/4223V This Plasma monitor is Energy Star compliant when used with a computer equipped with DPMS. 10.2 MOUNTING MATERIALS (Fixed and Flexible Wall Mounts, Ceiling Mounts, etc.) Notes: ● Follow mount bracket instruction included in mounting kit ● This type of equipment is to be installed by qualified installers; please contact with authorized dealer for installation.
User Manual BDH4222V/4223V 11. CLEANING AND TROUBLESHOOTING 11.1 CLEANING Cautions When Using the Plasma Monitor ■ Do not bring your hands, face or objects close to the ventilation holes of the plasma monitor. Top of plasma monitor is usually very hot due to the high temperature of exhaust air being released through the ventilation holes. Burns or personal injuries may occur if any body parts are brought too close.
User Manual BDH4222V/4223V 11.2 TROUBLESHOOTING Symptom Possible Cause Remedy No picture is displayed 1 The power cord is disconnected. 2 The main power switch on the back of the monitor is not switched on. 3 The selected input has no connection. 4 The monitor is in standby mode in RGB mode. 1 2 3 4 Plug in the power cord. Make sure the power switch is switched on. Connect a signal connection to the monitor. Press any key on your keyboard.
User Manual BDH4222V/4223V 12. LIMITED WARRANTY (EUR) Two Year Free Labor Two Year Free Parts WHO IS COVERED? You must have proof of the date purchased to receive warranty service. A sales receipt or other document showing the date that you purchased the product is considered proof of purchase. WHAT IS COVERED? Warranty coverage begins the day you buy your product. For two years thereafter, all defective parts will be repaired or replaced and labor is free.
User Manual BDH4222V/4223V WHERE IS SERVICE AVAILABLE? Warranty service is available in all countries where the product is officially distributed by Philips Consumers Electronics Europe. In countries where Philips Consumers Electronics Europe does not distribute the product, the local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not readily available). MAKE SURE YOU KEEP ...
User Manual BDH4222V/4223V REMEMBER ... Please record the model and serial numbers found on the product below. Also, please fill out and mail your warranty registration card promptly. It will be easier for us to notify you if necessary.
User Manual BDH4222V/4223V 58
User Manual BDH4222V/4223V 13. LIMITED WARRANTY (USA) One Year Free Labor One Year Free Parts WHO IS COVERED? You must have proof of the date purchased to receive warranty service. A sales receipt or other document showing the date that you purchased the product is considered proof of purchase. WHAT IS COVERED? Warranty coverage begins the day you buy your product. For one year thereafter, all defective parts will be repaired or replaced and labor is free.
User Manual BDH4222V/4223V WHERE IS SERVICE AVAILABLE? Warranty service is available in all countries where the product is officially distributed by Philips Consumers Electronics North America. In countries where Philips Consumers Electronics North America does not distribute the product, the local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not readily available). MAKE SURE YOU KEEP ...
