Soundbar 5.1.2 Fidelio B95 TAPR802 User manual Register your product and get support at www.philips.
Contents 1 Important Safety Care for your product Care of the environment Compliance Help and support 2 2 3 3 3 3 2 Your product What’s in the box Main unit Remote control Wireless subwoofer Connectors 4 4 4 5 6 6 3 Connect and set up Placement Connect to TV Connect TV or digital devices through HDMI Connect audio from TV or other devices Connect to power Pair up with the subwoofer Connect to Wi-Fi (Wireless Operation) 4 Use your product Insert batteries before using the remote control Adjust the volu
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Before you make or change any connections, make sure that all devices are disconnected from the power outlet. • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product.
reach of children. Ensure that the battery compartment is completely secure after you replace the battery. • If the battery compartment cannot be completely secured, discontinue use of the product. Keep out of reach of children and contact the manufacturer. This is CLASS II apparatus with double insulation, and no protective earth provided. ~ AC voltage This symbol means that the product contains batteries covered by European Directive 2013/56/EU which cannot be disposed of with normal household waste.
2 Your product Main unit Congratulations on your purchase, and This section includes an overview of the main unit. of product software upgrade), register your product at www.philips.com/support .
Remote control Note This section includes an overview of the remote control. 1 2 9 Play-Fi multi-room, Chromecast(Audio), AirPlay2, Alexa 3PDA & Spotify Connect are running in background when Wi-Fi is connected. They are selected and controlled by respective casting device/APP. c Navigation buttons • Up: Increase volume or select the previous item in the menu. • Down: Decrease volume or select the next item in the menu.
f Select a height effect level for Dolby Atmos. g (Sound) Select sound settings: (Surround/DRC/ IMAX/Dialogue/Bass/Treble/Sync). SUR Surround sound options DRC Dynamic Range control IMAX IMAX mode options DLG CTRL Adjust dialogue level (for DTS-X only) BASS Adjust bass level for preset EQ TREBLE Adjust treble level for preset EQ SYNC Adjust audio and video sync delay (HDMI only) • When the pairing succeeds, the indicator lights up white. • When the pairing fails, the indicator blinks white slowly.
3 Connect and set up This section helps you connect this product to a TV and other devices, and then set it up. For information about the basic connections of this product and accessories, see the quick start guide. Caution • For identification and supply ratings, see the type plate at the back or bottom of the product. • Before you make or change any connections, make sure that all devices are disconnected from the power outlet.
2 On your TV, turn on the HDMI-CEC operations. For details, see the TV use manual. 3 Repeatedly press the source button until E-ARC displays on the display panel. HDMI OUT (eARC/ARC) Blu-ray Player / DVD Player / Recorder / Set-top Box... HDMI 1 / HDMI 2 HDMI OUT Note TV TV • Your TV must support the HDMI-CEC and ARC • • • function and you must enable them. 100% interoperability with all HDMI-CEC devices is not guaranteed. Only HDMI 2.1 compatible cables can support the eARC function.
Option 2: Connect audio through an analog audio cable AUDIO OUT L Determine the status based on the wireless subwoofer indicator. LED behavior Fast blink Constant on R Slow blink Status Subwoofer in pairing mode Connected / Pairing successfuly Connecting / Pairing failed Note • Do not press the CONNECT (Connect) button 1 2 Using an analog cable, connect the AUDIO IN connector on this product to the AUDIO OUT connector or analog audio output connectors (red and white) on TV or other devices.
» Note If the connection succeeds, PLAY-FI displays on the display panel. • The subwoofer should be within 6 meters from • • • the main unit in an open area (the closer the better). Remove any obstacles between the subwoofer and the main unit. If the wireless connection fails again, check if there is a conflict or strong interference (e.g. interference from an electronic device) around the location. Remove them and try again.
8 After connection, this product may perform a software update. » Note • After connection, the product may perform a Upgrade to the latest software when it is set up for the first time. The software upgrade may take several minutes. Do not unplug your speaker, turn off your device, or break the network during the update. • AirPlay setup Use AirPlay to set up the Wi-Fi connection between iOS device (iOS7 or later) and soundbar.
4 Use your product This section helps you use this product to play media contents from all sources. Before you start • Make the necessary connections described in the quick start guide and the user manual. • Switch this product to the correct source for other devices. Insert batteries before using the remote control Slide to remove the battery compartment cover, insert 2 AAA batteries (1.5V) with correct polarity, then slide the battery compartment cover back into position.
Surround mode (SURR) Repeatedly press to select SURR, then press the left and right navigation buttons to select surround mode options. • UPMX: Up-mixing mode for driving output to all speakers even when content with audio channels lesser than the 5.1.2 (B95) or 7.1.2 (B97) speaker configuration. Upmixing technology from Dolby or DTS is applied according to content type. • STD: Standard mode for delivering original sound. The speaker outputs will follow the audio channels in content.
From your Blu-ray disc player: • Movie with Dolby Atmos. • Your Blu-ray disc player is connected to this product via HDMI IN 1/2 connector. • On your Blu-ray disc player, enable bitstream/raw audio format for HDMI sound output. • A high-speed HDMI cable. From your TV: • Movie with Dolby Atmos. • Your TV supports Dolby Atmos bitstream/ raw output. • Your TV is connected to this product via HDMI OUT connector. • A high-speed HDMI cable.
1 Using the 3.5mm stereo audio cable, connect the MP3 player to the AUDIO IN connector on this product. 2 Repeatedly press the source button until AUDIO IN displays on the display panel. 3 Press the buttons on your MP3 player to select and play audio files or music.
5 Settings Apply factory settings In case of no response from this product, you can reset this product to the default settings programmed at the factory.
6 Update software Caution • During update, smartphone is required to turn • To get the best features and support, update your product with the latest software. Update software via Wi-Fi on and stay in the update screen until the whole process is finished. It may take 10-30minutes and please arrange update to be done in product unused time. Update via USB Two parts in this product can be updated via Wi-Fi & Philips Sound App.
7 Wall mount your product 3.5-4mm/0.14”-0.16” 4mm/ 0.16” 0.16 ” Before you mount your product on the wall, read all safety precautions. (see ‘Safety’) 1 Wall mount • Improper wall mounting may result in • accident, injury or damage. If you have any query, contact Consumer Care in your country. Secure the wall mount to a wall that can support the combined weight of the product and the wall mount.
8 Product specifications Note • change without notice. • Total output power: 808W MAX / 410W RMS (1%THD) • Frequency response (main unit): 150Hz20kHz • Frequency response (Subwoofer): 35Hz150Hz • Signal-to-noise ratio: >65 db(CCIR) /(A-weighted) Audio • S/PDIF Digital audio input: • Optical: TOSLINK Bluetooth • • Bluetooth version: 4.2 • Frequency band/Output power: 2402 MHz ~ 2480 MHz / 2dBm Wi-Fi • Wi-Fi IEEE 802.11 a/b/g/n • Frequency band: 2.412 - 2.472 GHz, 5.18 - 5.32GHz, 5.50 - 5.70GHz, 5.
9 Troubleshooting Warning • Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/support Main unit The buttons on the main unit do not work. • Disconnect form the power supply for a few minutes, then connect again. Sound No sound from the soundbar speaker.
Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 2012-2020 Dolby Laboratories. All rights reserved. Manufactured under license from IMAX Corporation. IMAX® is a registered trademark of IMAX Corporation in the United States and/ or other countries. Manufactured under license from DTS Licensing Limited.
2020 © Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Limited is the warrantor in relation to this product.
