Register your product and get support at EN User manual AZD208
EN 1 Important Safety Important Safety Instructions a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
l Unplug this apparatus during lightning storms or when unused for long periods of time. m Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Warning •• •• •• •• •• •• • Never remove the casing of this apparatus. Never lubricate any part of this apparatus. Never place this apparatus on other electrical equipment. Keep this apparatus away from direct sunlight, naked flames or heat. Never look into the laser beam inside this apparatus. Ensure that you always have easy access to the power cord, plug or adaptor to disconnect this apparatus from the power.
Recycling Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed-out wheel bin symbol attached to a product, it means the product is covered by the European Directive 2002/96/EC: Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products.
Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), paper pulp (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
2 Your CD Soundmachine Introduction With this CD Soundmachine, you can: • play audio discs • listen to FM/MW radio • enjoy music from iPod and other external devices • program the play sequence of tracks Dynamic Bass Boost (DBB) helps you to maximizes music enjoyment.
Overview of the main unit a b CD SOUNDM ACHINE AZD2 08 CD ER TUN OFF MP3LINK FM c d e f g h MW VO LU M E DB L I F T —O P E N DO C K F O R a LIFT-OPEN • Open/close the disc compartment. b Source selector • Select a source: CD, iPod, or tuner. • Turn off the unit. c MP3 LINK • Jack for an external audio device. d o n m • Play track/tracks randomly. • Play track/tracks repeatedly.
e VOLUME • Adjust volume. f g h • • / Skip to the previous/next track. Search within a track. • Stop play. • Start or pause play. i DOCK FOR iPod j Display panel • Display current status. k DBB indicator l PROG • Program CD tracks and browse the program. DBB • Turn on/off dynamic bass boost. m Tuning button • Tune to a FM/MW radio station. n FM/MW • Select FM/MW source.
3 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
Connect power Warning •• Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the apparatus. •• Risk of electric shock! When you disconnect the AC power, always pull the plug from the socket. Never pull the cord. Note •• Install the apparatus near the power supply socket and where the power plug can be easily reached. 1 Connect the power cord to the AC MAINS jack on the unit and the power supply socket.
Tip •• To switch the apparatus off completely, disconnect the power cord from the power supply socket. Note •• To save energy: after use, turn off the apparatus. Turn on 1 Push the source selector to CD, iPod, or TUNER. Turn off 1 Push the source selector to OFF.
4 Play Play disc 1 2 3 4 Push the source selector to CD. Lift to open the disc compartment. Insert a disc with the printed side facing up, then close the disc compartment. Press to start play. • To pause/resume play, press . • To stop play, press . • To select another track, press / . • To search within a track, press and hold / , then release to resume normal play. Play from iPod You can enjoy audio from iPod through this unit.
2 Place the iPod player in the dock. 3 Push the source selector to iPod. • To pause/resume play, press . • To skip to a track, press / . • To search during play, press and hold to resume normal play.
Charge the iPod When iPod, TUNER, or MP3 LINK source is selected, the docked iPod begins to charge. Listen to the radio Tune to a radio station 1 2 3 Push the source selector to TUNER. Push the band selector to FM or MW. Turn TUNING to tune to a station. Tip •• Position the antenna as far as possible from TV, VCR or other radiation source. •• For optimal reception, fully extend and adjust the position of the antenna. Listen to an external device You can listen to an MP3 player through this apparatus.
5 Play options Adjust volume 1 During play, turn VOLUME to increase/decrease the volume level. Enhance bass 1 Press DBB repeatedly to turn on/off dynamic bass enhancement. »» When DBB is activated, the DBB indicator turns blue. Select play modes Repeat 1 Press to play the current track or all tracks repeatedly. • [ ] (repeat) – repeat a track. • [ALL](repeat all) - repeat an entire CD/program. Shuffle 1 Press to play all tracks randomly. • [SHUFFLE] (shuffle) - play tracks randomly.
4 Press to play the programmed tracks. »» During play, [PROG] (program) is displayed. • To erase the program, press . • To review the program, in the stop position, press PROGRAM. 6 Product information Note •• Product information is subject to change without prior notice. Specifications Disc Laser Type Semiconductor Disc Diameter 12cm/8cm Support Disc CD-DA, CD-R, CD-RW Audio DAC 24Bits / 44.
Tuner Tuning Range FM: 87.5 - 108MHz; MW: 530 1600kHz Total Harmonic Distortion <3% Signal to Noise Ratio >50 dB General Power supply AC: 220 - 240V, 50/60 Hz DC: 9V, 1.5 x 6 R14/UM2 Operation Power Consumption 15 W Standby Power Consumption <1W Dimensions - Main Unit (W x H x D) 297 x 112 x 264 mm Weight 1.7 kg Maintenance Clean the cabinet • Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.
• Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records. Clean the disc lens • After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good play quality, clean the disc lens with Philips CD lens cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner. 7 Troubleshooting Warning •• Never remove the casing of this apparatus.
•• •• •• Ensure that there is power at the AC outlet. Insert the batteries with their polarities (+/– signs) aligned as indicated. Replace the battery. No sound •• Adjust the volume. No response from the unit •• Take out the batteries and turn on the unit again. •• Disconnect and reconnect the AC power plug, then turn on the unit again. No disc detected •• Insert a disc. •• Check if the disc is inserted upside down. •• Wait until the moisture condensation at the lens has cleared.
© 2010 Koninklijke Philips Electronics N.V. All rights reserved. AZD208_12_UM_V1.
