Always there to help you Register your product and get support at www.philips.
Contents 1 Important 3 4 2 Your CD Soundmachine 4 4 4 5 6 3 Get started 7 7 7 8 8 4 Play 8 8 8 9 Risk of swallowing batteries Introduction What's in the box Overview of the main unit Overview of the remote control Prepare the remote control Connect power Turn on Turn off Play CD Play from USB devices Play from an external device 5 Play options 9 9 10 10 6 Listen to FM radio 10 10 10 11 11 7 Other features 11 11 11 11 8 Product information 12 12 12 12 13 Control play Program tracks Adjust
1 Important • • • • • • • • • • • • 3 Read these instructions. Follow all instructions. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the unit.
Risk of swallowing batteries • • • • The product or remote control may contain a button cell battery, which is possible to be swallowed. Keep the battery out of reach of children at all times! If swallowed, the battery can cause serious injury or death. Severe internal burns can occur within two hours of ingestion. If you suspect that a battery has been swallowed or placed inside any part of the body, seek immediate medical attention.
Overview of the main unit a b c d q p e f g h o n m l i j k a FM antenna • Improve FM reception. i MODE • Select a play mode: repeat or shuffle. b j SOURCE • Select a source. • Headphone socket. c AUDIO-IN • Connect an external audio device. k d l DBB • Turn dynamic bass boost on or off. e f • Turn the unit on or off. • • Stop play. Erase a program. / TUNING +/• Skip to the previous or next track. • Tune to FM radio stations. • Search within a track.
g SHUFFLE • Select shuffle play mode. Overview of the remote control a CD TUNER h DBB • Turn dynamic bass boost on or off. i DSC • Select a preset sound setting. USB j VOL +/• Adjust volume. b n c m l d e PROG SLEEP MUTE BACKLIGHT f REPEAT g SHUFFLE h DBB k MUTE • Mute or restore sound. l SLEEP/BACKLIGHT • Set sleep timer. • Turn the backlight on or off. m k VOL j DSC i n • • Stop play. Erase a program. • / Skip to the previous or next track.
3 Get started Option 1: AC power Warning Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of your apparatus. The model number and serial number are on the bottom of your apparatus. Write the numbers here: Model No. __________________________ Serial No.
3 Close the battery compartment. 4 Play Play CD 1 2 3 Press CD to select the disc source. Press OPEN•CLOSE to open the disc tray. Insert a disc with the printed side facing up, then close the disc tray. »» Play starts automatically. Turn on Press . »» The unit switches to the last selected source. Tip •• To select a source, press SOURCE repeatedly or the source selection buttons on the remote control. Play from USB devices Turn off Press again. »» The backlight on the display panel turns off.
5 Play options Control play In CD or USB mode, you can control play through the following operations. / Play from an external device / You can also listen to an external audio device such as an MP3 player through this unit. / 1 2 3 Press SOURCE repeatedly to select [AUDIO-IN] source. REPEAT Connect an audio cable (3.5mm, not supplied) to: • the AUDIO-IN socket on the unit. • the headphone socket on an external device. Play the external device (see the device's user manual).
Program tracks In CD or USB mode, you can program a maximum of 20 tracks. 1 2 3 4 5 6 Press to stop playback. Press PROG to activate the program mode. »» [PROG] (program) begins to blink. For MP3/WMA tracks, press ALBUM/ PRESET +/- to select an album. Press / to select a track number, then press PROG to confirm. Repeat steps 3-4 to program more tracks. Press to play the programmed tracks. »» During play, [PROG] (program) is displayed.
Store radio stations manually 7 Other features Note •• You can program a maximum of 30 FM radio stations. 1 2 3 4 Tune to an FM radio station. Press PROG to activate the storing mode. »» [PROG] (program) blinks on the display. Press to allocate a number (1 to 30) to this radio station, then press PROG to confirm. »» The preset number and the frequency of the preset station are displayed. Repeat the above steps to store other stations.
8 Product information Note •• Product information is subject to change without prior notice. Specifications Amplifier Max Output Power Frequency Response Signal to Noise Ratio Total Harmonic Distortion Audio-in Input Total 12 W 125 -16000 Hz, -3dB >55 dBA <1 % 650 mV RMS Audio DAC Total Harmonic Distortion Frequency Response S/N Ratio Power supply - AC Power - Battery Semiconductor 12cm/8cm CD-DA, CD-R, CD-RW, MP3-CD, WMA-CD 24Bits / 44.
• File name in Unicode UTF8 (maximum length: 128 bytes) Unsupported formats: • Empty albums: an empty album is an album that does not contain MP3/WMA files, and is not be shown in the display. • Unsupported file formats are skipped. For example, Word documents (.doc) or MP3 files with extension .dlf are ignored and not played. • AAC, WAV, PCM audio files • DRM protected WMA files (.wav, .m4a, .m4p, .mp4, .
•• Aim the remote control directly at the sensor on the front of the unit. 10 Notice USB device not supported •• The USB device is incompatible with the apparatus. Try another one. No disc detected •• Insert a disc. •• Check if the disc is inserted upside down. •• Wait until the moisture condensation at the lens has cleared. •• Replace or clean the disc. •• Use a finalized CD or correct format disc. Poor radio reception •• Increase the distance between the unit and your TV or VCR.
rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), paper pulp (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. AZ783_12_UM_V1.