Specifications

10
English
Preparations
Step 3: Setting language
preference
You can select your preferred language settings
so that this DVD Soundmachine will
automatically switch to the language for you
whenever you load a disc. If the language
selected is not available on the disc, the language
set by default will be used instead.
1 In disc mode,, press SYSTEM MENU.
2 Select LANGUAGE SETUP and press 4.
3 Press 5 / 4 keys on the remote control to
select your preferred option.
➜ Move to one of the following and press B.
– OSD LANGUAGE
– MENU LANGUAGE
4 Press 5 / 4 to select a language and press OK.
5 Repeat steps 3~4 for other settings.
To remove the menu
Press SYSTEM MENU.
1 In disc mode, press SYSTEM MENU.
2 Select SYSTEM SETUP nd press 4.
3 Press 5 / 4 keys on the remote control to
toggle through the functions and select your
preferred option.
➜ Move to “TV System” and press
B.
NTSC
– Select this if the connected TV set is NTSC
system. It will change the video signal of a PAL
video disc and output to NTSC system.
PAL
– Select this if the connected TV set is PAL
system. It will change the video signal of an
NTSC disc and output to PAL format.
AUTO
– Select this if the connected TV set is
compatible with both NTSC and PAL (multi
system). The output format will be consistent
with the video signal of the disc.
4 Select an item and press OK.
To remove the menu
Press SYSTEM MENU.
AZ5738_98_IFU_New 2009.4.30, 16:3410