Register your product and get support at AZ202/B/C/N/R EN User manual
English 1 Important Safety Important Safety Instructions a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
when moving the cart/apparatus combination to avoid injury from tip-over. l Unplug this apparatus during lightning storms or when unused for long periods of time. m Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Warning •• •• •• •• •• •• • Never remove the casing of this apparatus. Never lubricate any part of this apparatus. Never place this apparatus on other electrical equipment. Keep this apparatus away from direct sunlight, naked flames or heat. Never look into the laser beam inside this apparatus. Ensure that you always have easy access to the power cord, plug or adaptor to disconnect this apparatus from the power.
Recycling Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed-out wheel bin symbol attached to a product, it means the product is covered by the European Directive 2002/96/EC: Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products.
Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. This apparatus includes these labels: Class II equipment symbol This symbol indicates that the apparatus has a double insulation system. Norge Typeskilt finnes på apparatens underside. Observer: Nettbryteren er sekundert innkoplet.
2 Your CD Soundmachine Introduction With this CD Soundmachine, you can: • play audio discs • listen to FM/MW radio • enjoy music from external devices • program the play sequence of tracks Dynamic Bass Boost (DBB) helps you to maximizes music enjoyment.
Overview of the main unit a b CD CD SOUNDMACHINE AZ202 FM MW OFF MP3LINK c d e f g h DBB DBB ON OFF m l k j i a LIFT-OPEN • Open/close the disc compartment. b Source selector • Select a source: CD, FM, or MW. • Turn off the unit. c MP3 LINK • Jack for an external audio device. d • Play track/tracks randomly. • Play track/tracks repeatedly.
e VOLUME • Adjust volume. / f • • Skip to the previous/next track. Search within a track. • Stop play. • Start or pause play. g h i Display panel • Display current status. j PROGRAM • Program tracks and browse the program. k Tuning button • Tune to a FM/MW radio station. l DBB ON/OFF • Turn on/off dynamic bass boost.
Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of your apparatus. The model number and serial number are on the bottom of your apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Install batteries Note •• You can use both batteries and AC power as power supply of this apparatus. •• Batteries are not supplied with the accessories.
Connect power Warning •• Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the apparatus. •• Risk of electric shock! When you disconnect the AC power, always pull the plug from the socket. Never pull the cord. Note •• Install the apparatus near the power supply socket and where the power plug can be easily reached. 1 Connect the power cord to: • the AC MAINS jack on the unit • the power supply socket.
Tip •• To switch the apparatus off completely, disconnect the power cord from the power supply socket. Note •• To save energy: after use, turn off the apparatus. Turn on 1 Push the source selector to CD, FM or MW. Turn off 1 4 Push the source selector to OFF. Play Play disc 1 2 3 Push the source selector to CD. 4 Press to start play. • To pause/resume play, press • To stop play, press . • To select another track, press Lift to open the disc compartment.
• To search within a track, press and hold release to resume normal play. / , then Listen to the radio Tune to a radio station 1 2 Push the source selector to FM or MW. Turn TUNING to tune to a station. Tip •• Position the antenna as far as possible from TV, VCR or other radiation source. •• For optimal reception, fully extend and adjust the position of the antenna. Listen to an external device You can listen to an MP3 player through this apparatus.
5 Play options Adjust volume 1 During play, turn VOLUME to increase/decrease the volume level. Enhance bass 1 During play, adjust DBB to ON/ OFF turn on/off dynamic bass enhancement. Select play modes Repeat 1 Press to play the current track or all tracks repeatedly. • [REP] (repeat) – repeat a track. • [REP ALL](repeat all) - repeat an entire CD/program. Shuffle 1 Press to play all tracks randomly. • [SHUFFLE] (shuffle) - play tracks randomly.
4 • Press to play the programmed tracks. »» During play, [PROG] (program) is displayed. To review the program, in the stop position, press PROGRAM. To erase the program: 1 In CD mode, at the stop position, press PROGRAM to activate the program mode. 2 Press / until [00] is displayed, then pess PROGRAM »» The program is erased 6 Product information Note •• Product information is subject to change without prior notice.
Specifications Disc Laser Type Semiconductor Disc Diameter 12cm/8cm Support Disc CD-DA, CD-R, CD-RW Audio DAC 24Bits / 44.1kHz Total Harmonic Distortion <1% Frequency Response 60Hz -16kHz S/N Ratio >62dBA Tuner Tuning Range FM: 87.
General Power supply AC: 220 - 240V, 50/60 Hz DC: 9V, 1.5 x 6 R14/UM2 Operation Power Consumption 15 W Standby Power Consumption <1W Dimensions - Main Unit (W x H x D) 297 x 112 x 264 mm Weight 1.6 kg Maintenance Clean the cabinet • Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Clean discs • When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out.
7 Troubleshooting Warning •• Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www.philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
•• •• •• •• Check if the disc is inserted upside down. Wait until the moisture condensation at the lens has cleared. Replace or clean the disc. Use a finalized CD or correct format disc. Poor radio reception •• Increase the distance between the unit and your TV or VCR. •• Fully extend the FM antenna.
© 2010 Koninklijke Philips Electronics N.V. All rights reserved. AZ202_12_UM_V4.
