Register your product and get support at www.philips.
Eng lis h 1 Important Safety Important Safety Instructions a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
l Unplug this apparatus during lightning storms or when unused for long periods of time. m Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Warning Eng lis h •• Never remove the casing of this apparatus. •• Never lubricate any part of this apparatus. •• Never place this apparatus on other electrical equipment. •• Keep this apparatus away from direct sunlight, naked flames or heat. •• Never look into the laser beam inside this apparatus. •• Ensure that you always have easy access to the power cord, plug or adaptor to disconnect this apparatus from the power.
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste.
Eng lis h The making of unauthorized copies of copy-protected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes. This apparatus includes this label: Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.
2 Your CD Soundmachine Introduction With the CD Soundmachine, you can: • play CDs, MP3/wma discs • play mp3/wma files on USB devices • listen to FM/MW radio • program the play sequence of tracks.
Eng lis h m TUNER USB CD OFF TUNING FM MW MHz KHz x10 VOL PROG ALBUM MODE C D S O U N D M A C H I N E A Z1 6 2 7 LIFT TO OPEN a Source selector: CD,TUNER, USB, OFF. • Select CD, tuner, or USB source or turn off the unit b • USB socket.
i j • • • • Stop play Erase a program / Select the previous/next track Search backward/forward k TUNING+/• Tune to radio stations l FM/MW selector • Select the FM or MW source. m Telescopic antenna • Adjust FM reception n MP3 LINK • Jack for an external audio device.
Eng lis h 3 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
Note •• You can use both batteries and AC power as power supply of this apparatus. •• Batteries are not supplied with the accessories. 1 2 3 Open the battery compartment. Insert 6 x 1.5V R14/UM-2/C-cell batteries with correct polarity (+/-) as indicated. Close the battery compartment. Connect AC power Warning •• Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the apparatus.
•• Install the apparatus near the power supply socket and where the AC power plug can be easily reached. 1 Connect the power cord to the AC~ MAINS socket on the apparatus and to the power supply socket. • To switch the apparatus off completely, disconnect the power cord from the power supply socket. Note •• To save energy: after use, set the switch to OFF.
4 Use your CD Soundmachine Play a CD Note •• You cannot play CDs encoded with copyright protection technologies. You can play commercially available audio CDs: • CD-Recordables (CD-R) • CD-Rewritables (CD-RW) • MP3-CDs • WMA-CDs 1 2 3 4 5 Switch the source selector to CD. Lift the lid of the CD compartment. Insert a CD with the printed side facing up. Close the CD lid gently. »» The total number of tracks is displayed. Press to start play. »» [ ] is displayed. »» To stop play, press .
Eng lis h Note •• Ensure that the USB device contains playable audio contents for supported formats. (see ‘USB playability information’ on page 19) 1 2 3 4 5 Insert the USB connector on the device into the socket. Select USB source. Press ALBUM+/- to select a folder. Press / to select a file. Press to start play. • To stop play, press . • To pause or resume play, press . Select a track 1 Press / to select a track. Select an album For MP3-CDs only. 1 Press ALBUM+/- to select an album.
Tip •• When search reaches the end of the last track, the CD stops. Select play modes 1 Press MODE repeatedly to select a play mode: 2 [ ] (repeat) – repeat a track [ ALL] (repeat all) - repeat an entire CD/program [ ] (shuffle) - play tracks randomly [ ] (shuffle repeat all) - repeat all tracks randomly. • • • • To return to normal play, press MODE repeatedly until play mode icons are no longer displayed. Tip •• Shuffle play cannot be selected when you play programmed tracks.
6 Eng lis h 5 »» When all 20 tracks are stored, no more tracks can be selected and the display shows [FUL]. To play program, press . • In stop mode, press and hold PROG to browse programmed tracks. To delete program, press »» [CLr]is displayed. in stop mode. Listen to an external device You can listen to an MP3 player through this apparatus. Note •• When you connect an external device to MP3 LINK jack, the apparatus switches to MP3 LINK source automatically. 1 Use a cable with 3.
5 Product information Note •• Product information is subject to change without prior notice. Dimensions (W x H x D) Weight Power supply Power consumption Power output Operating temperature range 348 x 127 x 238 mm 1.7 kg 3.75 pound DC 9V 1.5 A AC 220-240V Active <12 W 2 x 1 W RMS -10 °C - 50 °C 14 °F -122 °F USB playability information Compatible USB devices: • USB flash memory (USB 2.0 or USB1.1) • USB flash players (USB 2.0 or USB1.
• • • • • WMA v9 or earlier Directory nesting up to a maximum of 8 levels Number of albums/ folders: maximum 99 Number of tracks/titles: maximum 999 ID3 tag v2.0 or later File name in Unicode UTF8 (maximum length: 128 bytes) Unsupported formats: Empty albums: an empty album is an album that does not contain MP3/WMA files, and is not be shown in the display. Unsupported file formats are skipped. For example, Word documents (.doc) or MP3 files with extension .dlf are ignored and not played.
6 Troubleshooting Troubleshooting Warning •• Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www.Philips.com/support), or contact Philips (see Contact information).
This disc may be defective. Play another disc. Ensure that the CD is a finalised CD/CD-R/CD-RW. Ensure that the laser lens is clean. Ensure that the CD is not encoded with copyright protection technologies. The CD skips tracks •• Ensure that the CD is not damaged or dirty. •• Ensure that program/shuffle mode is deactivated. USB device or SD/MMC card not supported •• The USB device or SD/MMC card is incompatible with the apparatus. Try another one.
© 2009 Koninklijke Philips Electronics N.V. All rights reserved.
