CONTROLS BASIC FUNCTIONS POWER: CD, TUNER, TAPE. selects the sound source enhances the bass adjusts the volume elev! 35mm headphone socket Note: Connecting the headphones wil switch off the speakers. (& Display (® REMOTE SENSOR sensor for the infrared remote contra {AZ 1208 only} (DD PLAYER 4 OPEN... opens the CO compartment stops CO play and erases the program PLAY-PAUSE D1. starts and interrupts CO play SEARCH tat bot...
POWER SUPPLY usu [Batteries For the set {optional} Open the battery compartment of the set and insert 8 batteries, type R20, UM-1 or D-gels (preferably alkaline), For the remote control {AZ 1208 only} Open the battery compartment of the remote control and insert 2 batteries, type R03, UM-4 or AAA-cells {preferably alkaline]. Remove batteries if they are flat or the set is nat going to be used for a longer period of time. Batteries contain chemical substances, sa they should be disposed of properly.
BASIC FUNCTIONS [Switching on and off | Set the POWER slider to the desired sound source: CD, TUNER, or TAPE. English The set is switched off when the POWER slider is in position QFF/TAPE and the keys of the gate deck are released. Note: If you run the set ont ‘batteries, always be sure to switch the set off after use, This will avoid unnecessary power consumption. [Adjusting volume and sound | Adjust the volume using the VOLUME control, ~ Display indication: Volume revel from 1208 only}.
| cystitis RADIO [Tuning to radio stations 1 1 Set the POWER slider to TUNER. 2 Select the wave band by using the BAND selector. = Display indication: the selected waveband, 3 Press SEARCH iss or ows for approx. 1 second and then release the button, = The radio automatically tines to a station with sufficient strength. Display indication during automatic tuning: 5-2 4 4 Repast this procedure until you find a station you desire. To tune to a weak transmitter briefly press SEARCH aa or poi as.
CD PLAYER [Playing ath 1 Set the POWER staider to CD. 2 Press & OPEN to open the CD compartment. 3 Insert an audio CD {printed side up) and close the GD compartment, — The CD player starts and scans the contents list of the CD, Then, the CD player stops. Display indication: the total amber of tracks and the total playing time of the CD. 4 Press the PLAY-PAUSE DI button to start CD play. ~ Display indication: the current track number. 5 Press the STOP 3 button to stop CD play.
CD PLAYER yspibug [Different playing modes: SHUFFLE / REPEAT SHUFFLE — Playing in random order 1 Press SHUFFLE before or during CU play. = All the tracks of the OD {or program if available} will now be played in random order. 2 Press SHUFFLE again to return to normal C0 play. REPEAT — Repeating the entire GD or one track of the €D 1 Before or during CO play, press REPEAT repeatedly to cause the display to show the different repeating modes. ~~ gear. the current track is played repeatedly.
CD PLAYER [Programming track numbers You can select a number of tracks and store these in the memory in the desired sequence. You can store any track more than once. A maximum of 20 tracks can be stored in the memory. 1 Select the desired track with SEARCH kes of poi. 2 As soon as the number of the desired track is displayed, press the PROGRAM button to store the track in the memory. = PROGRAM appears in the display and the number of the stored track is shown, Then gro 5 lights up briefly.
CASSETTE RECORDER ysnfiug [Praying a cassette 1 Set the POWER slider to TAPE, 2 Press STOP-OPEN [3A to open the cassette compartment. 3 Insert a recorded cassette with the open side upwards and close the telecasts compartment. 4 Press PLAY
CASSETTE RECORDER [Recording from the CD player -CD synchrony start 1 Set the POWER slider to CD. 2 Insert a CD and, if desired, program track numbers, 3 Press STOP.OPEN [J4 to open the cassette compartment, 4 Insert a blank, unprotected cassette and close the cassette compartment. & Press RECORD O to start recording, ~~ Playing of the CD or program starts automatically, It is not necessary to start the CD player separately. 6 For brief interruptions press PAUSE 00.
GENERAL INFORMATION busybody [General maintenance Da not expose the set, batteries, CDs or tapes to humidity, rain, sand or excessive heat {caused by heating equipment or direct sunlight]. ‘The mechanical parts of the set contain self-lubricating bearings and must not be oiled or lubricated! You can clean the set with a soft, slightly dampened lint-free cloth. [io not use any cleaning agents as they may have a compulsive effect.
TROUBLESHOOTING If a fault go ours, first check the points sifted WARNING : below before taking the set for repast. Under no circumstance should you try fo If you are unable to solve a problem by repair the set yourself as this will following these hints, consult your dealer or invalidate the guarantee, service center, Problem Possible cause . Solution No sound, VOLUME is rot adjusted, Adjust volume. Bo power Headphone is connected. Disconnect headphone. Mains cable is not securely connected.
