Always there to help you Register your product and get support at www.philips.
1 Important 2 Safety Notice 2 3 2 Your Wireless Hi-Fi Speaker 4 4 4 4 5 3 Prepare 6 Introduction What's in the box What else you need Overview of the main unit Download Philips AirStudio to your smartphone or tablets Connect power and switch on 4 Connect AW3000 to your home Wi-Fi network Option 1: Set up wireless connection to a non-WPS router through an iOS device Option 2: Set up through a non-WPS Wi-Fi router and Android device Option 3: Set up wireless connection to a WPS router Option 4: Set
1 Important i Do not expose the product to dripping / splashing water, rain or high humidity. j Keep this product away from direct sunlight, naked flames or heat. Safety Information for Europe: Know these safety symbols k Do not install near any heat sources such as radiators, heat registers, stoves, or other electrical equipment (including amplifiers). l Do not place any other electrical equipment on the product. m Do not place any sources of danger on the product (e.g.
This product complies with the radio interference requirements of the European Community. This product complies with the requirement of the 1999/5/EC directive. Modifications Modifications not authorized by the manufacturer may void user's authority to operate this product. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Environmental information All unnecessary packaging has been omitted.
2 Your Wireless Hi-Fi Speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
a English f MP3-LINK • Connect an external audio player through a 3.5mm audio cable (not supplied). Overview of the main unit g WI-FI SETUP button • Connect the device to a Wi-Fi network. h Screw hole for wall mounting b Tip •• You can go to Appendix 1 for details about wall mounting (see 'Appendix 1: Mount the device onto wall' on page 28). c h g f e d a +/• Adjust volume. b Numeric keys (1 to 5) • Tune to a preset Internet radio station. • Numeric key 1: Reset the device.
3 Prepare Always follow the instructions in this chapter in sequence. Download Philips AirStudio to your smartphone or tablets 1 (For iPod touch/iPhone/iPad users) Install Philips AirStudio from Apple App Store, and then run the app. (For users of Android smartphones or tablets) Install Philips AirStudio from Google Play Store and then run the app. 6 EN 2 Flick right to view the introduction pages and then go to the initial Setup page, or tap Skip intro to enter the initial Setup page directly.
On the initial Setup page, tap Setup a new speaker. Connect power and switch on English 3 Caution •• Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of the device. •• Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord. •• Before you connect the AC adaptor, make sure that you have completed all the other connections. 1 4 Read the power connection instructions on the app.
2 Connect the AC power cord to • the DC IN socket on the back of the device. • the wall power socket. »» The device switches on automatically. »» The power/status indicator blinks amber during boot-up. »» After a while, for first-time setup, the power/status indicator turns solid amber. DC 3 IN Tap Next on the app screen to continue. Switch between normal and Eco power standby mode • To switch the device to normal standby mode, briefly press the power button/ indicator above .
To connect AW3000 to your existing home WiFi network, you need to apply your home Wi-Fi settings to AW3000. Choose your best setup method based on the preconditions listed below. Platform of your mobile device iOS Type of your Wi-Fi router NonWPS Other requirement Setup method No Choose option 1 (see 'Option 1: Set up wireless connection to a non-WPS router through an iOS device' on page 9). Choose option 2 (see 'Option 2: Set up through a non-WPS Wi-Fi router and Android device' on page 12).
3 As instructed, briefly press WI-FI SETUP on the back of AW3000. »» The power/status indicator starts to blink amber and white alternately. 5 As instructed, exit the app, and then select Philips_Install from the list of available Wi-Fi networks. »» A new Wi-Fi network created by AW3000 will appear, with the network name (SSID) of Philips_Install. WiFi SETUP < 30S < 3S 4 Tap Next on the above app screen, and then read how to proceed with network setup.
Enter the password of your home Wi-Fi network, tap Done to finish input, and then tap Next. 10 Wait until the power/status indicator on AW3000 turns solid white. »» The following app screen appears. »» AW3000 is connected to your home Wi-Fi network successfully. * If your Wi-Fi password contains such special characters as #/:/;/', you need to change your password. 9 Name your speaker as you like, and then tap OK to connect AW3000 to your home Wi-Fi network.
Option 2: Set up through a non-WPS Wi-Fi router and Android device 1 4 Before setup, make sure that your Android device is connected to your home Wi-Fi network. 2 Read the Wi-Fi setup instructions on the app. 5 3 As instructed, briefly press WI-FI SETUP on the back of AW3000. »» The power/status indicator blinks amber and white alternately. »» A new Wi-Fi network created by AW3000 will appear, with the network name (SSID) of Philips_Install. WiFi SETUP < 3S 12 Tap Next on the above app screen.
7 Select your home Wi-Fi network and then tap Next. Enter the password of your home Wi-Fi network, and then tap Next. 8 9 Name your speaker as you like, and then tap OK to connect AW3000 to your home Wi-Fi network. English 6 Wait until the power/status indicator on AW3000 turns solid white. »» The following app screen appears. »» AW3000 is connected to your home Wi-Fi network successfully. * If your Wi-Fi password contains such special characters as #/:/;/', you need to change your password.
Note 3 As instructed, press and hold WI-FI SETUP on the back of AW3000. »» The power/status indicator blinks amber and green alternately. •• After successful network setup, you can tap Rock n' Roll on the above app screen to get ready for music play directly. For more details, go to the 'Play' section (see 'Play' on page 16). WiFi SETUP Option 3: Set up wireless connection to a WPS router 1 Tap WPS Setup? on the app screen . > 4S 4 Press the WPS button on your home Wi-Fi router.
Wait until the power/status indicator on AW3000 turns solid white, then tap Next on the app screen.. »» The following app screen appears. »» AW3000 is connected to your home Wi-Fi network successfully. Option 4: Set up wired connection through an Ethernet cable English 5 Note •• If you use wired connection, you just need to select Speaker already setup on the initial Setup page (see 'Download Philips AirStudio to your smartphone or tablets' on page 6).
5 Play 4 After both the device and speaker icons appear, hold and drag the icon of your device towards the speaker to set up connection between them. Stream audio to AW3000 Stream from your iOS or Android smartphone or tablet 1 2 3 16 Make sure that your iOS/Android device is connected to the same Wi-Fi network as AW3000. Run Philips AirStudio on your iOS or Android smartphone or tablet. If the following screen does not appear, select Speaker already setup on the initial Setup page.
Select your favorite music to start play. 1 2 Download Media Manager from www. philips.com/mediamanager. English 6 Find the license key available on the quick start guide, then install Media Manager onto your PC/Mac. Tip •• If the power/status indicator flashes white, it indicates that the speaker is muted. Adjust volume on the speaker or your iOS/Android device to resume sound output.
6 Select AW3000 as the media player. 7 Select a song from the list to start play. You can also control music play from your iOS/ Android device. 1 2 Make sure that your iOS/Android device and PC/Mac are connected to the same Wi-Fi network as AW3000. Run Philips AirStudio on your iOS or Android device. 3 4 5 Hold and drag the Media Manager icon towards the speaker to set up Wi-Fi connection. Tap the Media Manager icon to show music available for streaming. Select a song from the list to start play.
1 2 4 Run Philips AirStudio on your iOS or Android smartphone or tablet. Tap Services -> Philips AW3000 to enter the home page. 5 3 If the following message pops up, tap I agree to allow Internet access. English Listen to Internet radio stations through AW3000 Search for an Internet radio station by its name or location, language etc. On the home page, tap Internet radio to select the Internet radio source.
6 To tune to an Internet radio station, select and tap its name in the result list. 2 Tap a row in the list where you want to add the preset station. For example, if you want to assign preset number 2 to this station, tap the second row. »» A message pops up, in which the station name and preset number are shown. Philips AW3000 Preset Internet radio stations 1 20 Tune to an Internet radio station and tap . »» A list of preset radio stations appears. EN 3 Tap OK in the message box to confirm.
Repeat the above procedures to add more presets. 2 Tap to add the station into your favorite list directly. Tip •• You cannot delete a preset radio station directly, but you can replace it with another radio station. For example, if you want to delete a station at preset #3, you can tune to another radio station, tap , and then tap the 3rd row to replace the previous station. To tune to a preset radio station • Press numeric keys (1-5) on AW3000 directly to tune to the first five preset radio stations.
Play from an external device 2 Tap Services -> Philips AW3000 to enter the home page. You can also listen to an external audio player through the device. 1 Connect an MP3 link cable (not supplied) to: • the MP3-LINK socket on the back of the device. • the headphone socket on an external audio player. MP3 LINK 3 2 3 Start play on the external audio player and adjust volume. »» You can hear music from the wireless Hi-Fi speaker. Use the controls on your audio player to control music play.
5 Tap Internet Radio on the home page. »» If a new firmware is available. A firmware upgrade prompt pops up automatically. English 6 Upgrade firmware To improve the performance of AW3000, Philips may offer you new firmware for upgrade of your AW3000. Warning •• Always connect your AW3000 to AC power for firmware upgrade. Never power off your AW3000 during firmware upgrade. 1 2 3 4 Make sure that AW3000 is powered on and connected to the same Wi-Fi network as your smartphone or tablet.
7 Wait until the firmware upgrade process finishes, then tap OK on the prompt message to restart the device. 2 If a new firmware is available, tap OK on the prompt message to start firmware upgrade. »» The power/status indicator on AW3000 flashes amber during this process. You can also check and upgrade the firmware manually. 1 24 On the home page, tap ->Firmware upgrade -> Check Online to check for new firmware.
Note •• Product information is subject to change without prior notice. Frequency range PBC (one button push) 2412 - 2462 MHz (CH1-CH11) (for /79, /37, /55, /97) 2412 - 2472 MHz (CH1-CH13) (for /12, /10, /05) Yes General information Specifications Amplifier Rated Output Power Frequency Response Signal to Noise Ratio MP3 Link 2 X 18 W RMS @ 10% THD 80 Hz - 18 kHz, ±3 dB > 86 dB 800 mV RMS 20 kohm Speakers Speaker Impedance Speaker Driver Sensitivity 8 ohm 2 x dome tweeters, 2 x 3.
8 Troubleshooting Warning •• Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
•• Do not release the numeric key 1 until the power/ status indicator flashes amber for a second time. Occasional breaking of music streaming Do one or all of the following: •• Move AW3000 closer to your Wi-Fi router. •• Remove any obstacles between AW3000 and your Wi-Fi router. •• Avoid using Wi-Fi channel which is overlapped by the nearby Wi-Fi network. •• Check if your network speed is fast enough (in cases where multiple devices share the same router, the wireless performance may be affected).
9 Appendix 1: Mount the device onto wall 1 2 Find a suitable place on a wall and use a pencil to mark the chosen location with your purchased bracket. Follow the instructions supplied with the purchased bracket to drill holes as marked. Caution •• Risk of product damage! Always consult professional personnel to safely mount the product onto wall. Warning •• Risk of injury! Make sure that no supply ducts such as gas, water or electricity are harmed when you drill the holes.
LED color Blinking amber Solid amber White and amber alternately Green and amber alternately Solid white Blinking white Solid green Solid red English 10 Appendix 2: Understand meanings of LED colors Meaning The speaker is booting up or firmware upgrade is in progress. The speaker is not connected to any network. The speaker is in wireless setup mode, assisted by the AirStudio app. Follow the set-up instructions on the app. Wireless setup by the WPS method has been triggered or is ongoing.
Network Conditions of Use give you the rights to use certain features on your Device relating to the streaming of content. You must agree to these Terms and Conditions of Use before using the Device. Your use of the Device constitutes your agreement to be bound by these Terms and Conditions of Use and will give you the right to access these features. If you do not agree to these Terms and Conditions of Use, you may return your Device to the point of purchase.
正面 authorization is necessary, it is your responsibility to obtain any such license or authorization. You agree that you are solely liable for any damages you may incur resulting from your failure to obtain the proper license or authorization for use of the content accessible through the Device. You agree that Philips will have no liability to you with regard to your use of the content.
NOTICE SOFTWARE END USER LICENSE AGREEMENT AGREEMENT BETWEEN YOU ( ELECTRONICS B.V.
ability to play unprotected content. A list of revoked WM-DRM Software is sent to your PC and/or your Device whenever you download a license for Secure Content.
反面 meet the warranty set forth herein and that is returned to Philips with a copy of your receipt. This limited warranty shall be void if failure of the Software has resulted from any accident, abuse, misuse or wrongful application.
This product uses the following open source software: source code. And you must show them these terms so they know their rights. uClinux for Blackfin 2009R1 Release , licensed under GPL V2, We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. BusyBox R1.13.4 , licensed under GPL V2, Wireless Tools for Linux v29
Curl and libcurl 7.19.7 , licensed under a MIT/ X derivate license, COPYRIGHT AND PERMISSION NOTICE Copyright (c) 1996 - 2009, Daniel Stenberg, . All rights reserved. Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. AW3000_10_UM_V2.
