English INSTALLATION + Unpack all parts and remove protective material. « Fully tighten both record player transit screws {Fig. 3). Screw in clockwise direction (resort player not on all versions}. » insert the batteries of the remote control! unit, a5 indicated in the battery compartment. » Do not cover any vents and make sure that herb is sufficient ventilation room around the unit. CONNECTIONS Fig. 2 () terminals for two or four loudspeakers, minimum impedance 8 ohms.
Record player, Fig. 3 {not on all versions} adapter disc for 45 rpm records. transit protection screws. A lever o cause of lower the record player arm. selector for selecting the appropriate rpm. A fixing clamp for the record player arm Remote control unit, Fig. 10 {not an all versions} STAND BY button. (2] VOLUME UP/DOWN buttons. [3) Skip PREVENTIVE, for selecting preset stations and operating a CD player. DISC UPTOWN buttons, for selecting the discs in a CD auto changer. [5] STOP button, for a CD player.
CASSETTE DECKS Recording {deck T only} Copyright: Recording is permissible insofar as copyright or other fights of third parties are not infringed. For the UK. only: Recording and Playback of material may require consent.
