English INSTALLATION *# Unpack all parts and remove protective material. * Fully tighten both record player transit Screws A\ (Fig. 1. Screw in clockwise direction {record player not on all versions). * Insert the batteries of the remote control unit, as indicated in the battery compartment. * Do not hover any vents and make sure that there is sufficient ventilation room around the unit. CONNECTIONS, Fig, 2 @ terminals for loudspeakers, minimum impedance 8 tums.
DISC UP/DOWN buttons, for selecting the doges in 3 CO auto changer. [5] STOP button, for a CO player. [B] PLAY/PAUSE button, for a CD player. CD button, for selecting a compact dies player. SACS button, for selecting the cassette decks. 81 TUNER button, for selecting the tuner. PHONON button, for selecting the record player. SEARCH UP/DOWN tuning buttons.
the STOP/EJECT button & and place the cassette in the compartment, with the open side downwards and the full spoil on the left (see Fig. 4). * Do not use cassettes with tabs removed (Fig. 5 for making a retarding. They prevent the RECORD button @ from functioning properly. ยป If desired, switch on the DOLBY NR system with button &. * Press the PAUSE button @ of deck 1. * Press the RECORD button &. * Release PAUSE button @ to start recording.
