WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The Mode! and Medal Number of your unit will be found on the rear of the set. Please record the Model and Serial Number in the space provided below. MODEL NUMBER: AS 9400 / AS 9403 SERIAL NUMBER: This set complies with the FCC-Rules, Part 15, CAUTION RISK OF ELECTRIC SHOCK DO NOT PEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER {OR BACK NG USER-SERVICEABLE PARTS INSIDE.
Operating Instructions INSTALLATION » Unpack alt pairs and remove protective maternal. ® Fully tighten both record player transit screws £y {Fig. 3}. Resew in clockwise direction (record player riot on afl versions). # insert the batteries of the remote confront unit, as indicated in the battery compartment. { Fig.10) ® Do not cover any veins and make sure that there is sufficient ventilation rem around the unit, CONNECTIONS, Fig.
USING THE REMOTE CONTROL UNIT # Connect the jack RC QUT @) Fig. 2} o the REMOTE IN or RC5 ¥ jack of your Compact Disc payer. An optionally available cord ¢ah be used for this purpose. Before pressing any other remote control button, first pres, COIN 7] it you wish to operate your CD player. cassia] youngish to operate the cassette decks (volume and standby only). ~ TUNER {5}, # you wish fo operate your tuner. PHONON fie] if you wish to operate the record player {volume and standby only).
@ Crass the PAUSE button @ of deck T ® Press the RECORD button & # Release PAUSE button (910 start recording. # For short pauses press PAUSE of deck 1. Press PAUSE again to resume recording ® Crass STOP/EJECT of deck I 0 stop recording. Playback & Press the TAPE button & « Piggybacks positive with both decks Tor 1L # both PLAY bunions are pressed simultaneously, deck I has priority.
part of the stylus unit into place. Then push the foremost part upward until you can feel and hear the stylus lick info place. ® The dust cover is fitted with frictional hinges, can be set 1o almost any position. i this is not the case, carefully tighten the screws Fig. 2. The hinges must not be lubricated! Recorder maintenance Yo ensure a good recording and playback quality, clean the heads Hand ), capstan Band pressure roller (B) tater approx every 15 hours of operation (see Fig.
