Important notes for users in the UK Mains Plug This apparatus is fitted with an approved 13 Amp plug. Ta change a fuse in this type of plug proceed as follows: * Remove fuse cover and fuse. Fix nigh fuse which should be a BS13625 A PASTA. or BS} approved type. « Refit the fuse roves. 1f the fitted fug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place.
» The type plate is located at the rear of the set. » Recording is permissible if copyright or other rights of third parties are not infringed. 1 All unnecessary packaging material has been omitted. We have done our utmost to make the packaging says to separate into three mono-materials: — cardboard {(box) expandable polystyrene {buffer) — polyethylene (bags, protective foam sheet]. Please observe the local regulations regarding the disposal of these packaging materials.
tenpins [ (& AM Antenna Connection Connect the supplied loop antenna to the AM AERIAL terminal. Adjust the position of the AM loop antenna for the jest reception. (® FM Wire Antenna Connection Connect the supplied FM wire antenna to the FM 75 £ terminal. Adjust the position of the FM antenna for the best reception. Outdoor Antenna For better FM stereo reception connect an outdoor FM antenna 1o the FM AERIAL 75 Q terminal using a 75 O coaxial wire.
10 : 1 PHILIPS 32—t 1 POWER ON — to switch the set on or to standby mode, 2 HIGH SPEED DUBBING ~ to dub from TAPE DECK 2 to TAPE DECK 1 at high speed. 3 AUTO PROGRAM — to program preset stations automatically or manually. 4 OPTIMAL — 1o serest the sound setting that is tuned to the acoustics of the supplied speakers. 5 BAND ~ ta select the waveband font for alf versions}). 6 DIGITAL SOUND CONTROL (DSC} — to select the desired sound effect : JAZZ, ROCK, POF or CLASSIC.
Controls 15 SHUFFLE to play all the available discs and their tracks in random order, 16 DISPLAY ~ {0 display the current setting of the set. 17 CLOCK ~ seethe clock. 18 DEMO ~ to display the various features offered by the system. 19 VOLUME to adjust the volume level. 20 TIMER SET ~ 10 et the timer. 21 TIMER Alfonso — o switch the timer on or off, 22 DYNAMIC BASS BOOST {DBB) ~ 1o switch on bass boost to enhance bass response or to switch off bass boost.
wazoo e AS 665C The system has a demonstration mode that shows the various features afferent by the system. Whenever the system is switched an farm the wall socket, the demonstration mode will start automatically. To spat demonstration mode * Press DEMO, POWER ON, TUNER, CD, TAPE or PHONOGRAPH button on the system {or ¢, CD, TUNER or TAPE on cremate control} to stop the demonstration mode. To switch on demonstration mode * Press DEMO.
Tuner Tuning to radio stations 1 Press TUNER, 2 Press BAND to select the desired waveband font for all versions). 3 Press TUNING l1<
Cassette Deck PHILIPS PHILIPS e Loading a cassette + Press STOPS OPEN. « The cassette compartment door opens. « Load the cassette with the open side downward and the ful spew! o the left. » Close the cassettes compartment door. Tape Playback 1 Press TAPE. 2 Load the cassette into a cassette deck. 3 Press PLAY P 1o start playback. 4 Press STOP«OPEN io end playback.
Cassette Deck Dubbing cassettes (farm TAPE DECK 2 ta TAPE DECK 1) 1 Load the per-recorded cassette into tape deck 2nd & blank cassette into tape deck 1. — Make sure that goth cassettes have their full spools to the Aft. For high speed recording, press HIGH SPEED DUBBING, @ HIGH SPEED ~ High SPEED appears on the DUBBING display. Press PAUSE on tape deck 1. Press RECORD on tape deck 1. -+ RECORD appears on the display. Press PLAY » on tape deck 2. ~ Recording will start automatically.
| 12 Warning! 1) This set is designed for conversational CDs. Da not use any accessories like disc stabilizer rings or CD treatment sheets, ete, which may damage the CD mechanism. 2} Do not load more than one disc into each tray. 3} When the CD changer is loaded with CO{s). do not wm over of shake the unit as this may jam the changer mechanism. You can load up to three discs in the €D changer for continuous play without interruption.
1-Cl Changer When the CD tray is closed, you can also play a CD directly by pressing the 3CD DIRECT PLAY {13} buttons. The CD player will stop at the end of playback of the selected dies. desired track at the stop mode 1 Press i« PERV or NEXT »» { PERV or NEXT on the remote control} until the desired track appears on the display. 2 Press Plays Pause m~1t {or PLAY on the remote control) 1o start playback. == The selected track number and elapsed playing time appear on the display.
" | { Record Player Controls (D) Transport safety screws. (2) Pick up arm lever for raising and lowering the pick up arm. (3) RPM selector for selecting the appropriate speed Pick up arm lever clamp. Note: Preparation for use Fully tighten both record player transport safety screws. Screw in clockwise direction. Record Player Operation -~ Press PHONOGRAPH. Place a record on the turntable. Remove the stylus guard by gently pulling it forward. Set the appropriate sped the rpm selector.
[Anticlockwise ‘The clock will display in 24-hour mode, e.g. 58: 85 or23:5 5, 1 Press CLOCK. ~ "00:88" starts flashing. Set the hour with PRESET ¥ or A. Set the minute with TUNING [«endorphin . Press FLOCK again to store the setting. The clock starts running. Doter ~ When a prows interruption occurs, the clock settings are erased. EE [ Nutting the Timer * The system can switch on to TUNER or CD mode automatically at a preset time. It can serve as an alarm to wake you up.
Cleaning the Cabinet ammonia or abrasives. Cleaning Sises * When a disc becomes dirty, clean it with a cleaning cloth. Wis the disc farm the center out. L « Do not use solvents such as benzine, thinner, commercially available cleaners, or anti-static spray intended for analog records. Cleaning the Heads and the Tape Paths * Tonsure good recording and playback quality, clean the heads and the capstan ©, and pressure roller © after every 50 hours of cassette aeration.
Troubleshooting Guide “Weathering Bt agribusiness midyears stepsister the sot corollary, as this will validate the warranty, | & If fault occurs, check the points listed below before taking the set for repair. * Should any problems persist after you have made these checks, consult your nearest dealer ar service center. Recording is not possible. SYMPTOM POSSIBLE CAUSE REMEDY The STEED indicator flashes, The signal is (oo weak, Adjust the antenna. Severe hum or noise. The signal strength is too weak.
