INSTALLATION Installation « After unpacking the system, remove alf protective material.
CONTROLS T Front panel, Fig, 2 ‘ Receiver {Amplifier/Tuner) Impugn = s J TUNER, CD, TAPE and PHONOGRAPH function selector keys for defecting the sound source @) STANDBY ON ~ for switching on and off {3} VOLUME volume control with STANDBY display {flashes when the foremasts control 1s used) (& REMOTE SENSOR receives the infrared signals from the cremate control (& AUTO PROGRAM kay for automatic programming of preset stations (& MONO STEREO ~ for switching over to mono reception to reduce interference caused
CONTROLS Remote control, Fig.4 —STANDBY & for switching 1o the standby mode PHONON (AUX), €D, VCR, TV, TUNER function selector keys for selecting the signal source (TV o VCR can only be selected if the unit uses the CF-5 remote contra system). DISC selection (with CD changer) ~SHUFFLE for playing & CD in candor order {CD} PREVENT.
TUNER Yy Tuning Grid Programming North and South Treatments the frequency step between 3 5 | adjacent channels in the AM band has 1o bs 10 kHz. In al scammed with th S other parts of the world the step some. une 1 the station 1o bs programmed with the | versions of this unit the frequency step can be changed. 4 Yo change 10 10 kHz, proceed as Towlines: « Remove the mains plug o switch ol the power supply.
RECORD PLAYER CD PLAYER Record player (not on all versions) Playing a CD *Press the PHONOGRAPH key (. « Press the €D () key. * Place 4 record on the turntable. For records with a Sarge center hole, use the adapter disc 4. « Remove the stylus guard by gently puling it forward. * Set the appropriate speed the TP Selector . » Release the pickup arr from its clamp /. »Set the lever /4, toX. « Move the pickup arm inwards, This starts the record player.
CD PLAYER Track selection during playback in the PLAY or INTRO SCAN mode * Press the TRACK SKIP ¢ worm key @& briefly {less than half a second) until the desired track appears on the display. Playback starts automatically. Track selection during playback in the SHUFFLE mode » Cross the TRACK SKIP e or wi key (8 briefly {less than half a second). The next track selected at random will appear on the display and playback of this track begins.
CD PLAYER CASSETTE DECKS Selecting another source during playback *You can select another source during playback coach. «When you press the CD key (9 again, the CD player will return to the original made: PLAY, SHUFFLE, INTRO SCAN, REPEAT or PROGRAM. Playback of the CD will resume at the position, where it has been interrupted. N.B.: Playback cannot be resumed when the unit has been switched to STANDBY in the meanwhile. CD display i .
CASSETTE DECKS * By pressing the «« & and»» & keys, fast * To stop fast winding, pass the WA 2 key, ) Playback Fast winding m = ¢ Any type of cassette can be used. ‘% » Press the TAPE key (3. winding of the tape is possible in both g Playback is possible with dither of the two distinctions. cassette decks 1 and 2.
MAINTENANCE CD and CD player maintenance « Aver writs on the printed SIDS not attach stickers to the CD. « Neap the shiny surface of the CD clean. For cleaning, use a dint-free cloth and always wipe the disc in & straight line from the center to the edge g, 8}, » Never use cleaning agents intended for conventional records.
TROUBLESHOOTING LIST jury l -/ ¥ you are unable to remedy a probable by following these hints, consult your dealer or seance facility.
