Always there to help you Register your product and get support at www.philips.
Contents 1 Important Safety Notice 2 2 2 2 Your Docking Speaker for Android™ 4 Introduction What's in the box Overview of the main unit 4 4 5 3 Get started 6 6 6 4 Play 7 7 Power supply Turn on Dock and play Play audio through manual Bluetooth connection 5 Other features Play audio from an external device Charge your Android-powered device Charge non Android-powered device through the USB socket 8 10 10 10 10 6 Product information Specifications 11 11 7 Troubleshooting 12 EN 1
1 Important • Safety • • • • • • • • • • • • • • • 2 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
packaging materials, exhausted batteries and old equipment. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products.
2 Your Docking Speaker for Android™ Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this docking speaker, you can: • enjoy audio from your Androidpowered device or an external device; • charge your device. What's in the box Check and identify the contents of your package: • Main unit • AC power adapter • 3.
Overview of the main unit h a g b c f e d a b • Bluetooth indicator. • Turn on/off the docking speaker, or switch the docking speaker to standby mode. g FlexiDock 2 (for Android-powered device) h - VOL + • Adjust volume. c Adjustment wheel • Adjust to stabilize your docked device. d AUDIO IN • Connect an external audio device. e CHARGING • Charge your non Android-powered device through USB cable. f DC IN • Power supply socket.
3 Get started Always follow the instructions in this chapter in sequence. Power supply Either AC power or batteries can be used as power supply of this docking speaker. Option 1: AC power Caution •• Risk of product damage! Ensure that the power voltage corresponds to the voltage printed on the back or underside of the docking speaker. •• Risk of electric shock! When you unplug the AC adapter, always pull the plug from the socket. Never pull the cord.
4 Play With this docking speaker, you can enjoy audio from your devices. Dock and play Compatible with Android™ To make full use of your docking speaker, your Android-powered device should satisfy the following requirements: • With Android operation system (version 4.2 and above); • With a micro USB connector.
4 Slide the connector to place your device in the middle of the docking speaker. Play audio through manual Bluetooth connection The docking speaker uses Bluetooth wireless technology to stream music from your portable device to the system. Note •• Your Bluetooth device should be with Bluetooth software of version 2.1 or above. •• Before you connect a Bluetooth device to this docking speaker, familiarize yourself with the Bluetooth capabilities of the device.
4 5 When [PHILIPS AS360] (Philips AS360) is displayed on your device, select it to start connection. »» If connection is successful, you will hear double beep confirmation. Play audio with the media player of your device. »» The audio comes out through the docking speaker. Tip •• The effective operation range between the docking speaker and the paired device is approximately 10 meters (30 feet). •• Any obstacle between the speaker and the device can reduce the operational range.
5 Other features Note •• It is not guaranteed that all USB cables work with this docking speaker. •• Charging is not available in battery mode. Play audio from an external device You can listen to audio from an external device through this docking speaker. 1 2 Connect the 3.5mm audio in cable (supplied) to: • the AUDIO IN socket. • the headphone socket of an external device. Play audio on the external device (see the device's user manual).
6 Product information Note •• Product information is subject to change without prior notice. Specifications AC Power Battery Operation Power Consumption Eco Standby Power Consumption Dimensions - Main Unit (W x H x D) Weight - Main Unit Charging: - through micro USB connector - through CHARGING socket Speaker impedance OH-1028A0903000U-UK (Philips) Input: 100-240V~, 50/60Hz, 800mA MAX; Output: 9V 3A 4 x AA < 18W < 0.5W 260 X 90 X 95 mm 1.
7 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. AS360_05_EN_UM_V1.
