Register your product and get support at www.philips.
Contents 1 Important 2 Your Docking Speaker for Android™ Introduction What's in the box Overview of the main unit Charge your device through the USB socket Play audio from an external device 2 3 Get started 5 5 5 5 5 5 4 Play and charge 6 6 Power supply Option 1: AC power Option 2: Battery power Turn on Switch to standby mode Compatible with Android™ Play audio through manual Bluetooth connection Play audio through auto Bluetooth connection with Philips
1 Important • • • • • • • • • • • • • • 2 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
2 Your Docking Speaker for Android™ Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this docking speaker, you can: • enjoy audio from your Bluetooth-enabled portable device or an external device; • charge your portable device; and • experience various features brought by Philips Philips DockStudio and Philips Songbird app.
Overview of the main unit e a f b c d g h a b c • Activate or deactivate Bluetooth function. • Bluetooth indicator. • Charge your phone through USB cable. d AUX IN • Connect an external audio device. e Dock for Android-powered device 4 EN f +/• Adjust volume.
3 Get started Always follow the instructions in this chapter in sequence. 1 2 Open the battery compartment. Insert 4 AA batteries with correct polarity (+/-) as indicated. 3 Close the battery compartment. Power supply Either AC power or batteries can be used as power supply of this speaker. + AA AA + + AA AA + Option 1: AC power Caution •• Risk of product damage! Ensure that the power voltage corresponds to the voltage printed on the back or underside of the unit.
4 Play and charge With this docking speaker, you can enjoy audio in two ways: • through manual Bluetooth connection; • through automatic Bluetooth connection with Philips DockStudio app. Compatible with Android™ To make full use of your docking speaker, your Android-powered device should satisfy the following requirements: • With Android operation system (Version 2.1 or above); • With Bluetooth software (Version 2.1 or above); and • With a micro USB connector.
4 When [PHILIPS AS351] is displayed on your device, select it to start connection. »» If connection is successful, you will hear double beep confirmation and find a different Bluetooth icon on the top of the screen. »» The audio comes out through the docking speaker. Tip •• The effective operation range between the docking speaker and the paired device is approximately 10 meters (30 feet). •• Any obstacle between the speaker and the device can reduce the operational range.
Install DockStudio app onto Androidpowered device You have two ways to install Philips DockStudio on your Android-powered device. Install DockStudio app through QR code Note •• Make sure that your Android-powered device is connected to the internet. •• Make sure that your device has a barcode scanner such as "QR Droid". If not, download one from the Android market. 1 Use the barcode scanner to scan the QR code on the package or Quick Start Guide.
DockStudio Install DockStudio app through Android Market You can also search Philips DockStudio from Android Market directly, and then install the app. 2 Tap the search icon on the screen. Note •• Make sure that your Android-powered device is connected to the internet. •• Make sure that Android Market is available on your Android-powered device. 1 Tap the "Android Market" icon on your device. 3 4 5 In the search bar, type in "Philips DockStudio" to search the app.
Activate Bluetooth with DockStudio app Philips DockStudio app helps to connect your Android-powered device and docking speaker through Bluetooth automatically. Note •• Make sure that your Android-powered device is connected to the Internet. The Philips DockStudio app brings a suite of cool, new features to your Philips DockStudio docking speaker, including automatic Bluetooth connection, Songbird music player, worldwide Internet radio, sound settings 6 When installation is complete, tap [Done] (done).
»» The device starts to scan Philips devices that can be paired automatically. 4 When [PHILIPS AS351] is displayed on your device, select it to start connection. »» It may take a few seconds to complete the connection. »» After Bluetooth connection, a different Bluetooth icon can be found on the top of the screen. 5 Play audio with the media player of your portable device.
»» The audio comes out through the docking speaker. Next-time launch Next time you launch the DockStudio app, connect to the docking speaker through Bluetooth as below. 1 2 3 Activate the Bluetooth function of your docking speaker. Launch Philips DockStudio to access its menu. 4 12 Tap [Speaker Connection] (Speaker Connection) to activate automatic Bluetooth connection. EN »» It may take a few seconds to complete the connection. Play audio on your portable device.
»» The audio comes out through the docking speaker. 3 Adjust the bumpers on both sides of the connector to stabilize the phone. Dock and charge Androidpowered phone Dock Android-powered device To charge your Android-powered phone, you need to dock it in the docking speaker first. 1 2 Check the orientation of the micro USB connector on your Android-powered phone. If your USB connector has a cover, flip it outwards.
3 Dock your phone. Dock extension DockStudio Charge Android-powered phone When the docking speaker is connected to power, the docked phone starts charging automatically. Tip »» The DockStudio menu is displayed. •• This function is also available for non Android-powered device that has a micro USB connector. Play audio with Philips Songbird Philips Songbird is a simple, easy-to-use PC program and Android app.
3 4 »» You are requested to download Songbird. 5 Select a track, and then tap to play music. Follow the on-screen instructions to download the app. After installation, tap [Open] (Open) to access Songbird menu.
»» If it is the first time you connect the device to Philips Songbird, a pop-up screen appears. Select auto sync as prompted. Install Songbird on PC 1 2 Go to www.philips.com/songbird. songbird 3 4 »» The device synchronizes with Philips Songbird automatically. Search Songbird. Download the latest Songbird application. If you didn't select auto sync, you can sync with Songbird manually. 1 Select the device under Devices. 2 Select Manual or Auto.
5 Other features Use more features with DockStudio With Philips DockStudio, you can also listen to Internet radio, set alarm timer and sleep timer. Note •• Make sure that your portable device is connected to the Internet. 5 Listen to Internet radio 1 2 3 Connect your Android-powered device and the docking system through Bluetooth. Open Philips DockStudio to go to the main menu. Set sleep timer 1 Launch Philips DockStudio. Tap [Radio] (Radio) on the screen.
1 3 Select a time period for the sleep timer, and then tap [Start] (Start). Note •• This function only works with Philips Songbird. Set alarm timer With Philips DockStudio, you can set multiple alarms and know the latest weather. It even alerts you when weather conditions are suitable for your favorite outdoors activity. 18 EN 2 3 Launch the app. Tap the icon menu. to access clock setting Tap [Alarm settings] (Alarm settings).
4 Tap to access alarm setting menu. Note •• From the [Lifestyle] (Lifestyle) tab, you can select your preferred sport and weather (excellent, good, or fair). The alarm will not ring if the weather is not good enough. Charge your device through the USB socket Connect a USB cable (not supplied) to: • the socket at the back of the speaker. • the USB socket on your device. »» Your device begins charging. 5 Set the alarm, and tap [Save] (Save) on the top right of the screen.
Play audio from an external device You can listen to audio from an external device through this speaker. 1 2 20 Connect an MP3 link cable (not supplied) to: • the AUX IN socket. • the headphone socket of an external device. Play audio on the external device (see the device's user manual).
6 Product information Note •• Product information is subject to change without prior notice. Specifications Rated Output Power 2 X 5 W RMS AC Power OH-1028A0903000UVDE/-UK/-SAA/-CCC/IR/-UL (Philips); OH-1028A0903000U (Philips). Input: 100-240V~, 50/60Hz, 800mA; MAX Output: 9V 3A Operation Power < 35W Consumption Eco Standby Power < 1W Consumption Dimensions - Main 270 5 X 88.5 X Unit (W x H x D) 141 5 mm Weight - Main Unit 0.
7 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
8 Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products and batteries.
Specifications are subject to change without notice © 2012 Koninklijke Philips Electronics N.V. All rights reserved. AS351_78_CCR_V2.
