View pdf

To enjoy maximum pleasure from your Philips docking speakers,
make sure your Android phone meets the following specifications
1. Android version 2.1 or above
Go to Home page Menu Settings About Phone ‘Firmware version’, ‘Software information’ or
‘Android version’ to check the Android version of your phone. Please note that the settings may vary from model to model.
If the micro USB connector on your phone is located on the top, you will need to upgrade to Android version 2.3 or above in order
to correctly display the ‘Fidelio app’ as shown below.
Upgrade to
Android 2.3
or above
2. Bluetooth-enabled
Go to Home page Menu Settings Wireless network Bluetooth (Yes/No) to check if your phone
supports Bluetooth. Please note that the settings may vary from model to model.
3. Micro USB connector for charging
Dock your Android phone in its case:
The FlexiDock can accommodate phones with protective
case of up to 2mm thick.
Charge second device via rear USB:
Applicable for AS851 and AS351 docking speakers only.
You may charge a second phone or tablet via the USB socket
at the back at the same time.
X
2mm
Tablet
- 110909_Android compatibility.ai - Size: 9.5” x 13” - 4C lms + press proof on art paper
Applicable for Android phones with no protruding buttons near the micro USB connector
This is to prevent from accidental activation during docking.
If your phone has a micro USB socket cover, flip it outwards as shown below to dock.