Register your product and get support at www.philips.
1 Important 2 Your Docking Speaker for Android™ Introduction What's in the box Overview of main unit 3 Get started Connect power Turn on Set time Adjust brightness of display panel Adjust brightness of night light English Contents 2 3 3 3 3 4 4 4 4 4 4 4 Play and charge 6 Compatible with Android™ 6 Play audio through manual Bluetooth connection 6 Play audio through auto Bluetooth connection with Philips DockStudio 7 Dock and charge Android-powered phone
1 Important • • • • • • • • • • • • 2 Read these instructions. Heed all warnings. Follow all instructions. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the unit.
Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Overview of main unit English 2 Your Docking Speaker for Android™ a b Introduction With this docking speaker, you can: • enjoy audio from your Bluetooth-enabled device; • charge your device through micro USB connector; • Know the time; and • experience various features brought by Philips DockStudio and Philips Songbird app.
3 Get started Always follow the instructions in this chapter in sequence. Connect power Caution •• Risk of product damage! Ensure that the power voltage corresponds to the voltage printed on the back or underside of the unit. •• Risk of electric shock! When you unplug the AC adapter, always pull the plug from the socket. Never pull the cord. Connect the power adapter to the wall outlet. Set time 1 2 3 4 In standby mode, press and hold CLOCK/ NIGHT LIGHT for two seconds to activate clock setting mode.
Press CLOCK/NIGHT LIGHT repeatedly to adjust the brightness of the night light: high, medium, or off.
4 Play and charge With this docking speaker, you can enjoy audio in two ways: • through manual Bluetooth connection; • through automatic Bluetooth connection with Philips DockStudio app. Compatible with Android™ To make full use of your docking speaker, your Android-powered device should satisfy the following requirements: • With Android operation system (Version 2.1 or above); • With Bluetooth software (Version 2.1 or above); and • With a micro USB connector.
English Play audio through auto Bluetooth connection with Philips DockStudio Philips DockStudio app brings a suite of new features to your docking speaker, including automatic Bluetooth connection, Songbird music player, Internet radio and a multi-function alarm clock. To enjoy more features, you are recommended to download and install the free app. Install DockStudio app onto Androidpowered device 5 Play audio with the media player of your portable device.
2 Follow the on-screen instructions to install Philips DockStudio app. DockStudio The Philips DockStudio app brings a suite of cool, new features to your Philips DockStudio docking speaker, including automatic Bluetooth connection, Songbird music player, worldwide Internet radio, sound settings 3 When installation is complete, tap [Done] (done). DockStudio Install DockStudio app through Android Market You can also search Philips DockStudio from Android Market directly, and then install the app.
English The Philips DockStudio app brings a suite of cool, new features to your Philips DockStudio docking speaker, including automatic Bluetooth connection, Songbird music player, worldwide Internet radio, sound settings 2 Tap the search icon on the screen. 6 When installation is complete, tap [Done] (done). DockStudio 3 4 5 In the search bar, type in "Philips DockStudio" to search the app. From the search result list, find and tap Philips DockStudio to start downloading.
Activate Bluetooth with DockStudio app Philips DockStudio app helps to connect your Android-powered device and docking speaker through Bluetooth automatically. Note •• Make sure that your Android-powered device is connected to the Internet. First-time launch 1 2 On your docking speaker, press to activate Bluetooth. »» blinks on the display panel. »» The device starts to scan Philips devices that can be paired automatically. On the home screen of your device, tap the DockStudio icon to launch the app.
English »» After Bluetooth connection, a different Bluetooth icon can be found on the top of the screen. »» Now you can enjoy audio through the speaker. Next-time launch Next time you launch the DockStudio app, connect to the docking speaker through Bluetooth as below. 1 2 5 Activate the Bluetooth function of your docking speaker. Launch Philips DockStudio to access its menu. Play audio with the media player of your portable device.
»» The audio comes out through the docking speaker. Sync time automatically After you activate Bluetooth connection through Philips DockStudio, the docking speaker synchronizes time with your Bluetoothenabled device automatically. 3 Tap [Speaker Connection] (Speaker Connection) to activate automatic Bluetooth connection. Dock and charge Androidpowered phone Dock Android-powered device To charge your Android-powered phone, you need to dock it in the docking speaker first.
English Tip •• If the micro USB connector is located at the top, and your are using Android system of version 2.3 or above, screen auto-rotation is available. Use dock extension If the USB connector on your phone is close to the edge, the supplied dock extension can balance the docked phone, as illustrated. 1 3 Adjust the bumpers on both sides of the connector to stabilize the phone. 2 3 Adjust the bumpers on both sides to the lowest position. Place the dock extension onto the dock.
Play audio with Philips Songbird Philips Songbird is a simple, easy-to-use PC program and Android app. It lets you discover, play and sync your media from PC to your Android-powered devices seamlessly. Install Songbird on Android-powered device 1 Tap the DockStudio icon on your Androidpowered device. 2 Tap [Songbird]. DockStudio »» The DockStudio menu is displayed. 3 14 EN »» You are requested to download Songbird. Follow the on-screen instructions to download the app.
English 4 5 After installation, tap [Open] (Open) to access Songbird menu. Select a track, and then tap to play music. Install Songbird on PC 1 2 Go to www.philips.com/songbird. Search Songbird. songbird 3 Download the latest Songbird application.
4 Follow on-screen instructions to install Philips Songbird on your PC. Sync with PC through Philips Songbird Note •• Make sure that you have turned on the USB storage. 1 2 On your PC, launch Philips Songbird. Connect your Android-powered device to PC with a USB cable. Wait until the device is recognized by the Songbird. »» On Philips Songbird, the device is displayed when it is recognized by the PC. »» If it is the first time you connect the device to Philips Songbird, a pop-up screen appears.
English 5 Use more features with DockStudio With Philips DockStudio, you can also listen to Internet radio, set alarm timer and sleep timer. Note •• Make sure that your portable device is connected to the Internet. 5 Listen to Internet radio 1 2 3 Connect your Android-powered device and the docking system through Bluetooth. Open Philips DockStudio to go to the main menu. Tap [Radio] (Radio) on the screen. Set sleep timer 1 2 4 Select a radio station from the search result list.
alerts you when weather conditions are suitable for your favorite outdoors activity. 1 3 Select a time period for the sleep timer, and then tap [Start] (Start). 2 Note •• This function only works with Philips Songbird. Set alarm timer With Philips DockStudio, you can set multiple alarms and know the latest weather. It even 18 Launch the app. EN 3 Tap the icon menu. to access clock setting Tap [Alarm settings] (Alarm settings).
English 4 Tap to access alarm setting menu. Note •• From the [Lifestyle] (Lifestyle) tab, you can select your preferred sport and weather (excellent, good, or fair). The alarm will not ring if the weather is not good enough. 5 Set the alarm, and tap [Save] (Save) on the top right of the screen. »» The new alarm is saved and displayed on the screen.
6 Product information Note •• Product information is subject to change without prior notice. Specifications Amplifier Rated Output 2 X 2 W RMS Power Signal to 75 dBA Noise Ratio General information AC Power AS150-059-AA240(Philips); (Power AS150-059-AI240(Philips); Adaptor) AS150-059-AE240(Philips); Input: 100-240 V~, 50/60 Hz, 0.7 A; Output: 5.9 V 2.4 A S018KU0590240 (Philips); S018KV0590240 (Philips); S018KB0590240 (Philips); S018KS0590240 (Philips); Input: 100-240V~, 50/60Hz, 500mA; Output: 5.9 V 2.
English 7 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
8 Notice Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the user’s authority to operate the equipment. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company.
Specifications are subject to change without notice 2013 © WOOX Innovations Limited. All rights reserved. This product was brought to the market by WOOX Innovations Limited or one of its affiliates, further referred to in this document as WOOX Innovations, and is the manufacturer of the product. WOOX Innovations is the warrantor in relation to the product with which this booklet was packaged. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. AS111_12_UM_V3.
