Operation Manual

Recording your voice (Cassette B only)
1 Select TAPE source.
2 Follows steps 3-4 under Recording from
the Radio.
3 Speak towards the built-in microphone MIC
located on the top panel.
•Your voice is recorded.
4 Follows steps 5-6 under Recording from
the Radio.
Helpful hints :
– When recording, speaking a little far toward
the MIC on the top panel to avoid distortion of
recorded sound.
– When recording, volume adjusting will not
affect the volume of the recorded sound.The
recorded sound volume can be auto adjusted.
Recording Cassette A to Cassette B
1 Select TAPE source.
2 Insert a tape to be recorded in the Cassette
A.
• If desired, select a particular point of tape A
to start recording.
3 Insert a blank tape in the Cassette B.
4 Push DUBBING/BEAT CUT on the top
panel to NORMAL or HIGH position.
NORMAL: Recording speed is the same as
the Cassette A playback.
HIGH: Recording speed is about 2 times the
Cassette A playback.
5 Press PA USE ; on the Cassette B.
6 Press REC 0.
• Cassette B is in standby for recording.
7 Press PLAY 1 on the Cassette A.
• PAUSE ; auto ejects, and recording starts.
To stop recording,
• Simultaneously press 9 / / on the Cassette A
and Cassette B.
• Recording will auto stop when Ta pe B
comes to the end earlier.
• When Ta pe A comes to the end earlier,
immediately press 9 / / on the Cassette B to
stop recording.
Note:
– When recording, do not switch
DUBBING/BEAT CUT to change recording
speed.
Cassette Recorder
The making of unauthorized
copies of copy-protected mate-
rial, including computer pro-
grammes, files, broadcasts and
sound recordings, may be an
infringement of copyrights and
constitute a criminal offence.
This equipment should not be
used for such purposes.
AQ7170-61_CCR 2007.9.20 13:58 Page 6