Operation Manual

English Controls/ Power Supply
Congratulations on your purchase and
welcome to Philips!
To fully benifit from the support that
Philips offers, register your product at
www.philips.com/welcome.
Supplied Accessories
AC power cord
Top and front panels (See 1)
1
Cassette recorder keys (Cassette A):
PAUSE ;
pauses playback or recording
STOP•EJECT 9/
stops playback or recording.
– opens the cassette holder.
F. F/REW 5 or 6
fast winds/rewinds the tape
PLAY 1
starts playback
2
Handle
hand carries the set
3
PHONES
3.5mm stereo headphone jack
Helpful hints: Connecting the headphones will
switch off the speakers.
4
Telescopic antenna
improves FM/SW
reception.
5
VOLUME rotary adjusts volume level
6 MIC (built-in microphone)
– for voice recording
7 DUBBING/BEAT CUT
– switches to change recording speed
– switches to reduce interference when
recording radio station
8
Source selector: TAPE (OFF), RADIO
selects tape or radio source of sound
– switches off the set
9 Band selector: MW, SW1, SW2, FM
– selects wavebands,MW, SW1, SW2 or FM
0 TUNING rotary – tunes to radio stations
! Cassette recorder keys (Cassette B):
PAUSE ;
pauses playback or recording
STOP•EJECT 9/
stops playback or recording.
– opens the cassette holder.
F. F/REW 5 or 6
fast winds/rewinds the tape
PLAY 1
starts playback
RECORD 0
starts recording
@ FINE TUNING rotary – fine tunes radio
frequency
# Frequency reader
$ Cassette door B
% Cassette door A
^ FM STEREO indicator – lights up for
stereo FM reception
Back panel (See 1)
& AC INPUT – inlet for power cord
* Battery door – open to insert 6 X 1.5
batteries, type R20 or D-cells
Power supply
Whenever convenient, use the power cord if
you want to conserve battery life. Make sure
you remove the plug from the set and wall
outlet before inserting batteries.
Batteries (not included)
Insert 6 batteries, type R20 or D-cells
(preferably alkaline) with the correct polarity.
(See 1).
Batteries contain chemical substances, so
they should be disposed of properly.
Incorrect use of batteries can cause elec-
trolyte leakage and will corrode the compart-
ment or cause the batteries to burst:
Do not mix battery types: e.g. alkaline with
carbon zinc. Only use batteries of the same
type for the set.
When inserting new batteries, do not try to
mix old batteries with the new ones.
Remove the batteries if the set is not to be
used for a long time.
AQ7170-61_CCR 2007.9.20 13:58 Page 3