Clock Radio Register your product and get support at www.philips.
1 1 ALARM CLOCK TUNER PHOTO CLOCK RADIO AJL305 5 4 3 2 VOL 9 6 7 REC MIC 8 FM ANT.
English Controls / Power supply Controls (See 1) 1 Alarm Power supply 1 Connect the supplied power adapter to the set's DC IN 9V socket and to the power socket. 2 Disconnect the power adapter if you want to switch off the set completely.
General Information Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome Supplied accessory – 1 X certified power adapter (Model: DSA9W-09 FUK 090100 Input: 100-240V ~50/60Hz 0.3A, Output: +9V 1A) Restoring the set You can restore factory settings if the set does not react to any operation or you want to restore all settings. Reset – Press and hold RESET with a ballpoint or other thin sticks.
Setup - Clock In clock mode, you can set clock time, alarm time, auto dim, and slideshow, make the set automatically scan FM stations, and view memory status in the setup menu. Setting Clock Setting time 1 Press CLOCK. 2 Press SETUP to enter setup menu. 3 Press SELECT. ➜ The set enters clock setup mode. 4 Press SELECT. ➜ The set enters time setup mode. Setting date 1 Press DOWN to highlight Set Date. ➜ The set enters date setup mode. 2 Press SELECT.
Setup - Alarm Setup-Tuner Setting Alarm You can set the alarm time and select the alarm sound between Tuner and Buzzer. 1 Press CLOCK. 2 Press SETUP. ➜ Set Alarm is highlighted. 3 Press SELECT. ➜ The set enters alarm setup mode. 4 Press DOWN to highlight Alarm Time. 5 Press SELECT. ➜ The set enters alarm setup mode. 6 Press HOUR+ or UP, DOWN repeatedly or hold them until the desired hour is displayed. 7 Press MIN+, or UP, DOWN repeatedly or hold them until the desired minute is displayed.
Setup-Slideshow 1 Setup - Auto Brightness Setting Slideshow Setting Auto Brightness You can toggle slideshow on or off, and set the frequency of slideshow. The set can automatically dim at the start time and light up at the end time. Press UP or DOWN repeatedly to highlight Slideshow. 1 Press CLOCK. 2 Press SETUP. 3 Press DOWN repeatedly to highlight Auto Brightness. 4 Press SELECT. 5 Press SELECT. 6 Press UP or DOWN repeatedly to switch Auto Brightness function on or off.
Setup-Clock Display/Viewing Memory Status Setup-Clock Display You can set whether to display clock or not in photo mode. Clock/Alarm Displaying clock 1 Press CLOCK. 1 Press CLOCK. 2 Press SETUP. 3 Press UP or DOWN repeatedly to highlight Clock Display. 4 Press SELECT. 5 Press UP or DOWN to select ON or OFF. 6 Press SELECT to save setting and exit. Repeating alarm Viewing Memory Status You can repeat the alarm call at 9-minute intervals.
Tuner Tuning to radio station 1 Press TUNER to switch on radio (FM only). 2 Press and hold , for about 2 seconds, then release. ➜ The radio automatically tunes to a station of sufficient reception. To listen to a preset or preset station • Press PRESET+ or PRESET- once or more until the desired preset station is displayed. To pause radio • Press TUNER. ➜ OFF is displayed. Helpful hints: 3 • Repeat step 2 if necessary until you find the desired station.
Photo Voice Memo Helpful hints: Manual browsing • To browse all photos in albums Press the button below a certain person’s album. 1 Each message can last up to 20 seconds. 2 After you finish recording, the set switches to PHOTO mode automatically. 3 is displayed in the photo and indicates the number of messages left to the user. Slide show Playing and deleting messages The set can display all photos automatically at a set frequency. To listen to a message 1 Switch slide show on.
Brightness Adjustment • Connecting to PC/Sleep timer You can manually adjust LCD brightness or let the set adjust brightness automatically. You can load photos, restore lost photos into albums by connecting it to the PC. Manually adjustment Besides, you can synchronize time and auto dim setting on the PC with the set. For details, please refer to the supplied Quick Start Guide. Press REPEAT ALARM / BRIGHTNESS CONTROL once or more to cycle screen brightness through 3 levels.
Safety and maintenance • If you do not intend to use the clock radio for a long time, withdraw the power cord from the wall outlet. • Place the set on a hard and flat surface so that the system does not tilt. • Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. • Install the unit near the AC outlet and where the AC power plug can be easily reached.
Specifications TUNER Tuning Range .........................................................................................................................FM 87.5-108 MHz Signal-to-Noise Ratio ................................................................................................................................ 55 dB MAIN UNIT Power Supply Rating ...................................................................................................................100-240 V AC Power Consumption ........
Troubleshooting If a fault occurs, first check the points listed below before taking the set for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service center. WARNING: Do not open the set as there is a risk of electric shock. Under no circumstances should you try to repair the set yourself, as this will invalidate the warranty. No sound. – • Volume not adjusted. Adjust the VOL. Synchronization is interrupted and the set fails.