Always there to help you Register your product and get support at www.philips.
Contents 1 Important 3 2 Your FM/DAB+ clock radio 3 Introduction What's in the box 3 3 3 Get started 4 4 Listen to DAB+ radio 5 5 Listen to FM radio 7 6 Use system menu 9 Prepare FM/DAB+ antenna Connect power Turn on Set time For the first time use Store DAB+ radio stations automatically Store DAB+ radio stations manually Listen to a preset DAB+ radio station Use DAB+ menu Show DAB+ information Tune to FM radio stations Store FM radio stations automatically Store FM radio stations manually S
1 Important • • • • • • • • • • • • 3 Read these instructions. Heed all warnings. Follow all instructions. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the unit.
3 Get started c Always follow the instructions in this chapter in sequence. Prepare FM/DAB+ antenna For better reception, fully extend and adjust the position of the FM/DAB+ antenna. (Fig. ) Turn on b Press POWER. »» The clock radio switches to the last selected source. Switch to standby mode Note •• To prevent interference, position the antenna as far as possible from TV, VCR, or other radiation source. Press and hold POWER for 3 seconds. »» The clock (if set) appears on the display panel.
4 Listen to DAB+ radio e 3 sec. Digital Audio Broadcasting (DAB+) is a way of broadcasting radio digitally through a network of transmitters. It provides you with more choice, better sound quality and more information. For the first time use 1 Tip •• To adjust the 12/24 hour format, see "Use system menu" > "Set hour format and synchronize time". •• When being idle for 10 seconds, the clock radio exits clock setting mode automatically. 2 Press SOURCE repeatedly to select DAB+ radio.
In DAB+ mode, press and hold SCAN for 3 seconds. »» The clock radio stores all the available DAB+ radio stations automatically. »» After full scan, the first available station is broadcast. Use DAB+ menu 1 2 Store DAB+ radio stations manually You can store up to 10 DAB+ radio stations. 1 2 3 4 5 Tune to a DAB+ radio station. Press and hold PRESET for 3 seconds to activate the storing mode. Press TUNING / to select a number. »» The preset number is displayed for one second.
Show DAB+ information While listening to DAB+ radio, press INFO repeatedly to scroll through the following information (if available): »» Station name »» Dynamic Label Segment (DLS) »» Signal strength »» Program type (PTY) »» Ensemble Name 5 Listen to FM radio Tune to FM radio stations 1 2 »» Frequency »» Signal error rate »» Bitrate »» Codec »» Time and date Press SOURCE repeatedly to select FM radio. Press and hold TUNING / for 3 seconds.
4 5 Press PRESET to confirm. Repeat steps 1-4 to store more FM stations. Tip •• To remove a pre-stored FM radio station, store another station in its place. Select a preset FM radio station In FM mode, press PRESET repeatedly to select a preset radio channel. Show RDS information RDS (Radio Data System) is a service that allows FM stations to show additional information. 1 2 Tune to an RDS station.
POP M Pop music NATION National M Music ROCK M Rock music OLDIES Oldies Music MOR M Light music FOLK M Folk Music LIGHT M Light classi- DOCU- Documencal music MENT tary CLASSICS Classical TEST Alarm Test music OTHER M Special ALARM Alarm music programs WEATHER Weather 6 Use system menu Use the system menus to • set the 12/24 hour format; • select whether to synchronize time from the DAB+ stations; • check the software version of this clock radio; • update firmware if necessary; and • reset the clock radio
Reset all the settings 1 2 3 4 5 Enter the system menu. Press / to select [RESET]. Press SELECT to confirm. Press / to select an option. • [RESET N]: Return to the previous menu. • [RESET Y]: Reset the radio to factory default status. Press SELECT again to confirm. Register your product 1 2 3 4 5 Go to www.philips.com/support. Click the link of "Register my product" (the exact wording of this link name may vary in different languages). Log in with your account on the prompt Web page.
7 Other features Set the alarm timer You can set two alarms to ring at different time. (Fig. ) Note •• Make sure that you have set the time correctly. 1 2 3 4 5 6 Tip •• When the alarm sounds, volume rises gradually. •• If DAB is selected as alarm source, while no DAB+ radio station is available, buzzer is activated when alarm time comes. Activate/deactivate the alarm timer 1 2 Press and hold AL1 or AL2 for 3 seconds to activate alarm setting mode. »» The alarm icon and the hour digits blink.
Adjust volume Press VOLUME / . (Fig. ) 8 Product information d Note •• Product information is subject to change without prior notice. Amplifier Rated Output Power Adjust display brightness Press BRIGHTNESS repeatedly to select different brightness levels. 0.5 W RMS Tuner FM: Tuning Range Tuning Grid Sensitivity - Mono, 26dB S/N Ratio Search Selectivity Total Harmonic Distortion Signal to Noise Ratio FM: 87.5 - 108 MHz 50 KHz <22 dBf 25-32 dBf < 2% >50 dBA DAB: Tuning Range 174.92-239.
General information AC Power(Model) AS030-060-EE050 (Philips) 100-240 V ~, 50/60 Hz, (Input) 0.15 A 6 V 0.5 A (Output) Operation Power <3 W Consumption Standby Power <1 W Consumption Dimensions - Main Unit (W x H x D) 152 x 62 x 109 mm Weight - Main Unit 0.3 kg 9 Troubleshooting Warning •• Never remove the casing of this product. To keep the warranty valid, never try to repair the product yourself. If you encounter problems when using this product, check the following points before requesting service.
10 Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. This product complies with the radio interference requirements of the European Community. Recycling Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
Specifications are subject to change without notice © 2012 Koninklijke Philips Electronics N.V. All rights reserved. AJB4700_12_UM_V1.
