Always there to help you Register your product and get support at www.philips.
Contents 1 Important 3 2 Your FM/DAB+ clock radio 3 Introduction What's in the box 3 3 3 Get started 4 4 Listen to DAB+ radio 5 5 Listen to FM radio 7 6 Use system menu 9 Prepare FM/DAB+ antenna Connect power Turn on Set time For the first time use Store DAB+ radio stations automatically Store DAB+ radio stations manually Listen to a preset DAB+ radio station Use DAB+ menu Show DAB+ information Tune to FM radio stations Store FM radio stations automatically Store FM radio stations manually S
1 Important • • • • • • • • • • • • 3 Read these instructions. Heed all warnings. Follow all instructions. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the unit.
3 Get started (Fig. ) c Always follow the instructions in this chapter in sequence. Prepare FM/DAB+ antenna For better reception, fully extend and adjust the position of the FM/DAB+ antenna. (Fig. ) b Turn on Press POWER. »» The clock radio switches to the last selected source. Switch to standby mode Note •• To prevent interference, position the antenna as far as possible from TV, VCR, or other radiation source. Connect power Caution Press and hold POWER for 3 seconds.
4 Listen to DAB+ radio e 3 sec. Digital Audio Broadcasting (DAB+) is a way of broadcasting radio digitally through a network of transmitters. It provides you with more choice, better sound quality and more information. For the first time use 1 Tip •• To adjust the 12/24 hour format, see "Use system menu" > "Set hour format and synchronize time". •• When being idle for 10 seconds, the clock radio exits clock setting mode automatically. 2 Press SOURCE repeatedly to select DAB+ radio.
In DAB+ mode, press and hold SCAN for 3 seconds. »» The clock radio stores all the available DAB+ radio stations automatically. »» After full scan, the first available station is broadcast. Use DAB+ menu 1 2 Store DAB+ radio stations manually You can store up to 10 DAB+ radio stations. 1 2 3 4 5 Tune to a DAB+ radio station. Press and hold PRESET for 3 seconds to activate the storing mode. Press TUNING / to select a number. »» The preset number is displayed for one second.
Show DAB+ information While listening to DAB+ radio, press INFO repeatedly to scroll through the following information (if available): »» Station name »» Dynamic Label Segment (DLS) »» Signal strength »» Program type (PTY) »» Ensemble Name 5 Listen to FM radio Tune to FM radio stations 1 2 »» Frequency »» Signal error rate »» Bitrate »» Codec »» Time and date Press SOURCE repeatedly to select FM radio. Press and hold TUNING / for 3 seconds.
4 5 Press PRESET to confirm. Repeat steps 1-4 to store more FM stations. Tip •• To remove a pre-stored FM radio station, store another station in its place. Select a preset FM radio station In FM mode, press PRESET repeatedly to select a preset radio channel. Use FM menu 1 2 3 4 In FM mode, press and hold MENU for 3 seconds to access FM menu. Press / to scroll the menu options: • [SCAN SETTINGS] • [SYSTEM] (see the Chapter "Use system menu") To select an option, press SELECT.
6 Use system menu Use the system menus to • set 12/24 hour format; • select whether to synchronize time from the DAB+ stations; • check the software version of this clock radio; and • reset the clock radio to factory default status. Set hour format and synchronize time 1 2 3 4 Enter the system menu (see "Listen to DAB+ radio" > "Use DAB+ menu" or "Listen to FM radio" > "Use FM menu") Press to select [TIME]. Press SELECT to confirm. Repeat steps 2-3 to select a sub-option.
7 Other features Set the alarm timer You can set two alarms to ring at different time. (Fig. ) Note •• Make sure that you have set the time correctly. 1 2 3 4 5 6 Tip •• When alarms sounds, volume rises gradually. •• If DAB is selected as alarm source, while no DAB+ radio station is available, buzzer is activated when alarm time comes. Activate/deactivate the alarm timer 1 2 Press and hold AL1 or AL2 for 3 seconds to activate alarm setting mode. »» The alarm icon and the hour digits blink.
Adjust volume Press VOLUME / . (Fig. ) d 8 Product information Note •• Product information is subject to change without prior notice. Amplifier Rated Output Power Adjust display brightness Press BRIGHTNESS repeatedly to select different brightness levels. 0.5 W RMS Tuner Tuning Range Tuning grid Sensitivity - Mono, 26dB S/N Ratio Search Selectivity Total Harmonic Distortion Signal to Noise Ratio FM: 87.5 - 108MHz DAB+: 174.92 239.
9 Troubleshooting Warning •• Never remove the casing of this product. To keep the warranty valid, never try to repair the product yourself. If you encounter problems when using this product, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support). When you contact Philips, make sure that the product is nearby and the model number and serial number are available.
Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. This is CLASS II apparatus with double insulation, and no protective earth provided. 2012 © Koninklijke Philips Electronics N.V. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V or their respective owners.
Specifications are subject to change without notice © 2012 Koninklijke Philips Electronics N.V. All rights reserved. AJB4700_05_UM_V1.
