Register your product and get support at www.philips.
1 Important Read these instructions. Heed all warnings. Follow all instructions. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the clock radio.
2 Your DAB clock radio Congratulations on your purchase, and welcome to Philips! To fully % www.philips.com/welcome. What’s in the box Check and identify the contents of your package: www.philips.
3 Get started Prepare FM/DAB antenna For better reception, fully extend and adjust the position of the FM/ DAB antenna. Note To prevent interference, position the antenna as far as possible from TV, VCR, or other radiation source. Connect power Caution Risk of product damage! Ensure that the power voltage corresponds to the voltage printed on the back or underside of the clock radio. Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord.
Note The type plate is located at the bottom of the clock radio. Set time 1 Press and hold SOURCE for two seconds. » [STANDBY] is displayed. 2 Press and hold SET TIME for two seconds. » The current time is displayed. » The hour digits begin to blink. 3 Press TUNING / to set the hour. 4 Press SET TIME » The minute digits begin to blink.
5 Press TUNING / to set the minute. 6 Press SET TIME Note & ' ) hour/minute digits blink, go directly to step 2 to set time.
4 Listen to Digital Audio Broadcasts (DAB) * + 1 *+1 ) through a network of transmitters. It provides you with more choice, better sound quality and more information. Tune to DAB radio stations Note Make sure that the antenna is fulled extended. 1 Press SOURCE repeatedly to select DAB mode. » [Full SCAN] 2 Press SELECT to start full scan.
Scan DAB radio stations automatically Tip New stations and services will be added in the DAB broadcast. To make new DAB stations and services available, perform full scan regularly. In DAB mode, press and hold PROG/AUTOSCAN for 3 seconds. » The unit stores all the available DAB radio stations automatically. » 5 Store DAB radio stations manually You can store up to 20 DAB radio stations in preset channel. 1 Tune to a DAB radio station.
Listen to a preset DAB radio station In DAB mode, press PRESET to select a preset number. Display DAB information 1 Tune to a DAB radio station. 2 Press INFO/MENU repeatedly to scroll through the following 8 » " » *9" » " » < %5= » Ensemble » Freq channel » " » Bitrate » Codec » Time » Date Use DAB menu 1 In DAB mode, press and hold INFO/MENU for two seconds to access DAB menu.
[Manual]: ! add it to the station list. [DRC]: add or remove a degree of compensation for the differences in the dynamic range between radio stations. [Prune]: Remove all the invalid stations from the station list. [System]: Adjust system settings. 3 To select an option, press SELECT. 4 Repeat steps 2-3 if sub-option is available under one option.
5 Listen to FM radio Tune to FM radio stations 1 Press SOURCE repeatedly to select FM mode. » [FM] is displayed. 2 Press and hold TUNING / for two seconds. » The FM tuner tunes to a station with strong reception automatically. To search for a radio station manually: Press TUNING / to tune to a radio station. Store FM radio stations automatically 1 In FM radio mode, press and hold PROG/AUTOSCAN for two seconds. » All available FM radio stations are stored automatically.
5 Repeat steps 1-4 to store other stations. Tip To remove a pre-stored FM radio station, store another station in its place. Listen to a preset FM radio station In FM mode, press PRESET to select a preset number. Display RDS information * " *" information along with FM stations.
2 Rotate TUNING / to scroll the menu options: [Scan settings] [System] 3 To select an option, press SELECT. 4 Repeat steps 2-3 if sub-option is available under one option. [Scan setting] [Strong ]: scan stations with strong signals only. [All ]: scan all the available radio stations. [System] [Reset]: reset all the settings to factory default. [Upgrade]: update software if available. [SW ver]: know the software version of the unit. [Time]: select 24H or 12H mode.
6 Other features Set alarm timer Note Make sure that you have set the clock correctly. Tip When alarm sounds, volume rises gradually. You cannot adjust the alarm volume manually. You can set two separate alarm timers. For the alarm sound, you can select the FM radio, DAB radio, or the buzzer. 1 Press and hold AL1/AL2 for two seconds. » AL1/AL2 icon and the hour digits blink. 2 Press TUNING / to set the hour. 3 Press AL1/AL2 » The minute digits blink.
Activate/deactivate alarm timer Note Make sure that you already set the alarms successfully. 1 Press AL1/AL2 repeatedly to activate or deactivate the alarm timer. » The alarm icon appears if the alarm timer is activated and disappears if it is deactivated . » The alarm settings retain for the next day. 2 When the alarm is ringing or in snoozing mode, press AL1/AL2. » The alarm switches off , » The alarm icon is still displayed.
Set sleep timer This clock radio can switch to standby mode automatically after a preset period. Press SLEEP appears. » When the sleep timer is activated, To deactivate the sleep timer, press SLEEP repeatedly until [OFF] appears. 15 30 60 90 120 OFF Adjust volume While listening, press - VOLUME + to adjust volume. Adjust display brightness Press SNOOZE repeatedly to select different brightness levels.
5 ) %> Q"1 socket at the back of the clock radio, and follow the update instructions on Philips website.
7 Product information Note Product information is subject to change without prior notice. Tuner Tuning Range FM: 87.5 - 108MHz DAB: 174.92 - 239.20MHz 5 [K 50 KHz " ] K ^_ 1 " < < 22dBf " " > 28dBf Total Harmonic Distortion < 3% " < >50 dB General information AC power K 8 +"|_|]|_|]}L~|| L 8 ~|| - 240V, ~50/60Hz, 0.15A; Output: 1.0A 6.
" % ) > <1W Dimensions ] K Q & G G * 150 x 50 x 165 mm Weight - Main Unit - With Packing 0.3 kg 0.
8 Troubleshooting Warning Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go % & ))) & Philips, make sure that the device is nearby and the model number and serial number are available.
9 Notice This product complies with the radio interference requirements of the European Community. Recycling Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed-out wheel bin symbol attached to a product, it means the product is covered by the European Directive 2002/96/EC: Never dispose of your product with other household waste.
Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. + G approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. 2012 © Koninklijke Philips Electronics N.V.
All registered and unregistered trademarks are property of their respective owners. © 2012 Koninklijke Philips Electronics N.V. All rights reserved. AJB4600_05_UM_V1.
