Register your product and get support at www.philips.
Contents 1 Important Safety 2 8 Troubleshooting 11 9 Notice 12 2 2 Your Docking Entertainment System 3 Introduction What's in the box Overview of the main unit 3 Get started 3 3 4 5 Install battery Connect power Switch to standby mode Set time and date 5 5 5 5 4 Play from iPod/iPhone 6 Compatible iPod/iPhone Install application Play from iPod/iPhone Charge the iPod/iPhone Adjust volume Remove the iPod/iPhone 6 6 7 8 8 8 5 Listen to radio Tune to FM radio stations 6 Other features Set alarm
1 Important Safety 2 Heed all warnings. Follow all instructions. Do not use the clock radio near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other heat.
2 Your Docking Entertainment System Congratulations on your purchase, and ) * ; < $ support that Philips offers, register your product at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the clock radio. Write the numbers here: Model No. __________________________ Serial No.
Overview of the main unit c a b d e f j k g h l m i a AL1/AL2 Set alarm. View alarm settings. Activate/deactivate alarm timer. b SNOOZE/BRIGHTNESS Snooze alarm. Adjust display brightness. f SLEEP Set sleep timer. g SOURCE Select source. h Battery tray i Power cord c DOCK Dock for iPod/iPhone. j d Volume knob Rotate to adjust volume or time. * # k SET TIME Set the time. e 4 EN Turn on/off the clock radio. / Tune or scan to an FM radio station.
3 Get started Connect power Caution Caution Risk of product damage! Make sure that the power Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. voltage corresponds to the voltage printed on the back or underside of the unit. Risk of electric shock! When you unplug the power adapter, always pull the plug from the socket.
3 * " $ # » The hour digits begin to blink. 4 Repeat steps 2-3 to set hour and minute. 4 Play from iPod/ iPhone Note If clock is not manually set, when iPod/iPhone is connected, the unit synchronizes time from the iPod/ iPhone automatically. Tip The accuracy of the transmitted time depends on the docked iPod/iPhone that transmits the time signal. You can enjoy audio from iPod/iPhone through this clock radio.
Play from iPod/iPhone Note Make sure that you have installed the application in your iPod/iPhone. 1 Click home audio icon on your iPod/ iPhone. » The setting page appears. Click setting button on the bottom right corner, and you can set the clock, sleep timer, and alarm for your clock radio. 3 Slide to the third page to reset radio stations. a Press to tune to a radio station. b Press SAVE, and then press a preset number.
Note Charge the iPod/iPhone If you don't need to preset more stations, press SAVE again to make sure that the SAVE button is deactivated # 4 Slide to the following page. You can: set the theme; share the information; set the location for weather report; choose temperature unit; turn on or off month/day revert; search for radio stations automatically by pressing Radio Auto Program automatic programming.
5 Listen to radio 6 Other features Note Keep the unit away from other electronic devices to Set alarm timer avoid radio interference. For better reception, do not place iPod/iPhone into the dock when you listen to the radio. Fully extend and adjust the position of the FM antenna. Set alarm Note Tune to FM radio stations You also can tune to radio stations from your clock radio. Make sure that you have set the clock correctly. You can set two alarms to ring at different time.
To stop the ringing alarm, press the corresponding AL1/AL2. » The alarm repeats ringing for the next day. Snooze alarm When alarm sounds, press SNOOZE. » The alarm snoozes and repeats ringing 9 minutes later. Set sleep timer This clock radio can switch to standby mode automatically after a preset period. Press SLEEP repeatedly to select the sleep # » When the sleep timer is activated, appears. To deactivate the sleep timer, press SLEEP repeatedly until clock time appears.
8 Troubleshooting General information AC power ) Brand name: Philips; Model: YJS03-1001800B; Input: 100-240 V~, 47-63 Hz; 500 mA; Output: 10.0 V Operation Power Consumption Standby Power Consumption 1800 mA; <25 W <1 W Dimensions: Main Unit 283 x 118 x 112 mm Weight: -Main Unit -With Packing 1.36 kg 1.75 kg Warning Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself.
9 Notice This product complies with the radio interference requirements of the European Community. device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
Specifications are subject to change without notice © 2011 Koninklijke Philips Electronics N.V. All rights reserved. AJ7034D_05_UM_V1.
