User manual

1 Press and hold AL1/AL2 for two seconds to activate alarm

setting mode.

» The hour digits and alarm icon begin to blink.

2 Press TUNING +/- or / to set the hour.

3 Press AL1/AL2toconrm.

» The minute digits begin to blink.

4 Repeat steps 2 to 3 to set the minute and alarm volume. G

Select alarm source

Adjust AL1/2 iPhone·RADIO·BUZZ control to select alarm

source for both alarms.

Note

• When alarm time comes, the selected radio, buzzer, or iPod/iPhone

turns on.

• You can only select the same alarm source for Alarm 1/ Alarm2.

• If iPhone is selected as alarm source, while no iPod/iPhone is

connected, the clock radio switches to buzzer source instead.

Activate/deactivate alarm timer

1 Press AL1/AL2 to view alarm settings.

2 Press AL1/AL2 again to activate or deactivate the alarm timer.

or appears if alarm timer is on and disappears if it

is off.

• To stop the ringing alarm, press the corresponding

AL1/AL2.

• The alarm repeats ringing for the next day.