Always there to help you Register your product and get support at www.philips.
Content 1 Important Safety 2 2 2 Your Docking Entertainment System 3 Introduction What's in the box Overview of the main unit 3 Get started Connect power Turn on Set time and date 3 3 4 5 5 5 5 4 Play 6 6 9 10 10 5 Other features 11 11 11 11 6 Product information Specifications 12 12 7 Troubleshooting 13 8 Notice 13 Play from iPod/iPhone Listen to radio Play from an external device Adjust volume Set alarm timer Set sleep timer Adjust display brightness EN 1
1 Important Warning •• Never remove the casing of this clock radio. •• Never place this clock radio on other electrical equipment. •• Keep this clock radio away from direct sunlight, naked flames or heat. Safety •• To reduce the risk of fire or electric shock, do not • •• Ensure that you always have easy access to the power • • • • • • • • • 2 Heed all warnings, and follow all instructions. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
2 Your Docking Entertainment System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
Overview of the main unit f g h i g m a j l b c d e k a Display panel b SOURCE • Select source. c • Turn on/off the clock radio. d - VOLUME + • Adjust volume. e DOCK • Dock for iPod/iPhone. f SNOOZE/BRIGHTNESS • Snooze alarm. • Adjust display brightness. g AL1/AL2 • Set alarm. • View alarm settings. • Activate/deactivate alarm timer. h • TUNING Tune or scan to an FM radio station. i TIME SET • Set the time. j DC IN • Power supply socket. 4 EN k FM ANTENNA • Improve FM reception.
3 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Switch to standby mode Press to switch the clock radio to standby mode. »» The clock (if set) is displayed. Set time and date Always follow the instructions in this chapter in sequence. 1 Connect power In standby mode, press and hold TIME SET on the back of your clock radio for more than two seconds.
4 Play Play from iPod/iPhone You can enjoy audio from iPod/iPhone through this clock radio. SOURCE Compatible iPod/iPhone The unit supports the following iPod, iPhone models: Made for. • iPod touch 5th generation • iPod nano 7th generation • iPhone 5 3 For the first-time use, you will be asked to install the HomeStudio app on your iPod/ iPhone. Install HomeStudio App 4 5 Tap [Yes] to accept the installation request.
1 Tap HomeStudio icon on your iPod/ iPhone. 2 Follow the on-screen instruction to finish the registration. Play music in the iPod/iPhone Note 2 Tap 3 Select a track from the playlist, and then press . »» Music streams from your iPod/iPhone to the clock radio. Use more features with "HomeStudio App" •• Make sure that you have installed the HomeStudio app Note on your iPod/iPhone. 1 to select Music library source. •• Make sure that your iPod/iPhone is inserted into the clock radio.
2 3 On the screen below, tap the . Store FM radio stations automatically 1 Tap and then tap the icon on right top the screen to select FM Radio source. 2 Tap to search the radio station with strong reception automatically. »» All available stations are stored. »» The first stored radio station is broadcast automatically. You can choose to turn the alarm1/alarm2 on or off. Set sleep timer: 1 2 Tap and then tap Choose a period of time and tap Start.
4 5 Select a preset number, enter the station title, then Done. Charge the iPod/iPhone Repeat the above step to store more stations. Dimmer the screen brightness When your clock radio is connected to power, the docked iPod/iPhone begins to charge automatically. 1 Tap and then tap to dimmer the screen the screen brightness. 2 Remove the iPod/iPhone Tap anywhere to restore the screen brightness. Pull the iPod/iPhone out of the dock.
Tune to FM radio stations Adjust volume You also can tune to radio stations from your clock radio. 1 Press SOURCE repeatedly to select FM tuner. 2 Press and hold / on the back of your clock radio for more than two seconds. »» The radio tunes to a station with strong reception automatically. 3 Repeat step 2 to tune to more stations. To tune to a station manually: Press / reception.
5 Other features Set alarm timer Set alarm You can set two alarms to ring at different time. Buzzer, FM radio, or your last listened audio in the iPod/iPhone can be selected as alarm sound. »» [AL1] or [AL2] is displayed if the alarm timer is on and disappears if it is off. • To stop the ringing alarm, press the corresponding AL1/AL2. »» The alarm repeats ringing for the next day. Snooze alarm When alarm sounds, press SNOOZE. »» The alarm snoozes and repeats ringing nine minutes later.
6 Product information General information AC power (power adapter) •• Product information is subject to change without prior notice. Operation Power Consumption Standby Power Consumption Dimensions: Main Unit Amplifier Rated Output Power Frequency Response Signal to Noise Ratio Total Harmonic Distortion Aux Input (MP3 link) 2 X 2 W RMS 40-20000 Hz >65 dB <1% 0.6 V RMS 10 k ohm Tuner (FM) Tuning range Tuning grid Sensitivity 87.
7 Troubleshooting 8 Notice Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
EN 15
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. AJ5305D_05_UM_V2.
