Register your product and get support at www.philips.
Contents 1 Important Safety 4 4 2 Your Docking Entertainment System 5 Introduction What's in the box Overview of the main unit 3 Get started Connect power Turn on Set time and date 5 5 6 7 7 8 8 4 Play 8 8 11 11 12 5 Other features 12 12 13 13 6 Product information Specifications 13 13 7 Troubleshooting 14 8 Notice 15 Play from iPod/iPhone Listen to radio Play from an external device Adjust volume Set alarm timer Set sleep timer Adjust display brightness EN 3
1 Important Warning •• Never remove the casing of this clock radio. •• Never place this clock radio on other electrical equipment. •• Keep this clock radio away from direct sunlight, naked Safety • • • • • • • • • • 4 Heed all warnings, and follow all instructions. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat.
2 Your Docking Entertainment System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
Overview of the main unit a f b c e d g l h k i j a AL1/AL2 • Set alarm. • View alarm settings. • Activate/deactivate alarm timer. b SOURCE • Select source. c • Turn on/off the clock radio. d DOCK • Dock for iPod/iPhone. 6 EN e - VOLUME + • Adjust volume. f SNOOZE/BRIGHTNESS • Snooze alarm. • Adjust display brightness. g TIME SET • Set the time. h • TUNING Tune or scan to an FM radio station.
i DC IN • Power supply socket. j FM ANTENNA • Improve FM reception. k MP3-LINK • Connect an external audio device. l SLEEP • Set sleep timer. 3 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence.
Turn on Press . »» The clock radio switches to the last selected source. Switch to standby mode Press to switch the clock radio to standby mode. »» The clock (if set) is displayed. Set time and date 1 2 3 4 In standby mode, press and hold TIME SET on the back of your clock radio for more than two seconds. »» [12H] or [24H] begins to blink. Press / repeatedly to select 12/24 hour format. Press TIME SET to confirm. »» The hour digits begin to blink. Repeat steps 2-3 to set hour and minute.
1 Tap HomeStudio icon on your iPod/ iPhone. »» The clock/alarm setting screen appears. SOURCE 3 4 5 For the first-time use, you will be asked to install the HomeStudio app on your iPod/ iPhone. Tap [Yes] (yes) to accept the installation request. Follow the on-screen instructions to complete the installation. 2 Slide left to display the following screen.
Use more features with "HomeStudio App" Note •• Make sure that your iPod/iPhone is inserted into the clock radio. Set clock, alarm, and sleep timer: 1 2 Launch the HomeStudio app. On the screen below, tap the setting icon . »» You can set clock, sleep timer, and alarm for your clock radio. Store FM radio stations manually: 1 2 3 4 Note •• The alarms set with your clock radio will appear under [Dock Alarm] (dock alarm) category.
Tip •• If you need not preset more stations, press [SAVE] Listen to radio (save) again to deactivate it (in gray). Use more features: Slide right to the next screen. You can: • set the theme; • share the information; • set the location for weather report; • choose temperature unit; • select month/day display mode; • store radio stations automatically by tapping [Radio Auto Program] (radio auto program). »» [Searching] (searching) is displayed. »» All available stations are stored.
Adjust volume 5 Other features Set alarm timer Set alarm VOLUME You can set two alarms to ring at different time. Buzzer, FM radio, or your last listened audio in the iPod/iPhone can be selected as alarm sound. Note •• Make sure that you have set the clock correctly. 1 2 3 4 Press and hold AL1/AL2 for more than two seconds to activate alarm setting mode. »» The hour digits and alarm icon begin to blink. Press / repeatedly set the hour. press AL1/AL2 to confirm. »» The minute digits begin to blink.
2 Press AL1/AL2 repeatedly to activate or deactivate the alarm timer. »» [AL1] or [AL2] is displayed if the alarm timer is on and disappears if it is off. To stop the ringing alarm, press the corresponding AL1/AL2. »» The alarm repeats ringing for the next day. 6 Product information • Note •• Product information is subject to change without prior notice. Snooze alarm When alarm sounds, press SNOOZE. »» The alarm snoozes and repeats ringing nine minutes later.
General information AC power (power adapter) Operation Power Consumption Standby Power Consumption Dimensions: Main Unit (W x H x D) Weight: -Main Unit -With Packing Brand name: Philips; Model: Y12FE-0502000B; Input: 100-240 V~, 5060 Hz; 0.35 A; Output: 5 V 2000 mA; <10 W <1 W 283 x 118 x 112 mm 0.658 kg 0.820 kg 7 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself.
8 Notice This product complies with the radio interference requirements of the European Community. Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
Specifications are subject to change without notice © 2012 Koninklijke Philips Electronics N.V. All rights reserved. AJ5300D_05_UM_V1.
