DAB radio AJ5100 Meet Philips at the Internet http://www.philips.
7 1 Scanning... 1 2 3 4 5 12 BBC Radio 5 Live DLS Scrolling... 6 7 BBC Radio 5 Live Signal error 7 7 3 6 PHILIPS DAB & FM Radio BBC Radio 5 Live 80kpbps Mono 2 BBC Radio 5 Live News 3 BBC Radio 5 Live BBC National DAB 4 BBC Radio 5 Live 10:32 07-08-2003 5 BBC Radio 5 Live 12B 225.64MHz 4 8 7A 9 8 0 188.92MHz 5 9 FM Radio 88.10MHz @ ! # 6 FM Radio 88.
English Supplied Accessory – 9V AC/DC power adaptor Front panel (see 1) 1 ON•OFF – switches on/off the set 2 DAB•FM – selects DAB (on Band 3 ), or FM mode 3 SCAN DAB: – auto search and store all DAB stations FM: – tunes to a station Controls/Power Supply • When inserting new batteries, do not try to mix old batteries with the new ones. General information ! p – 3.5 mm stereo headphone socket Helpful hints: The speakers will be muted when headphones are connected to the set.
Basic Operation 1 DAB Radio Basic operation Switching on DAB radio Scanning for DAB stations Press ON•OFF to power on the set. For the first time when DAB mode is switched on, AJ5100 will perform an auto scan (see 2).Then all the available DAB stations will be stored on the set, and the radio will tune to the first available station. New stations and services will be regularly added in the DAB broadcast.To make new DAB stations and service available on your DAB radio, a search is needed.
DAB Radio DAB Radio Changing the DAB station information In DAB broadcasting, on the display, the first line shows a station name, and the second line shows the service information for the current station.You are offered with 7 types of information. • 1 Using the MENU control Dynamic Range Control (DRC) Trim Station The menu control lets you access the DAB radio setup options. DRC adds or removes a degree of compensation for the differences in the dynamic range between radio stations.
FM Radio Switching on FM radio 1 Press ON•OFF to power on the set. ➜ The LCD lights up. 2 Press DAB•FM to select FM mode if "FM" is not displayed. ➜ Waveband and radio frequency are displayed (see 5). Tuning to radio stations 1 In FM mode, press SCAN until frequency number starts running. ➜ The radio will auto tune to a station of strong signal strength, and search will stop. 2 To tune to a weak station, press 1 / 2 until an optimum reception is found.
Troubleshooting Hearing Safety If a fault occurs, first check the points listed below before taking the set for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service centre. • WARNING: Do not open the set as there is a risk of electric shock. Under no circumstances should you try to repair the set yourself, as this will invalidate the guarantee. • Problem – Possible cause • Remedy The radio has no power. – • – • Power adaptor not securely connected.
Environmental information All unnecessary packaging material has been omitted.The packaging can be easily separated into three materials: cardboard, polystyrene and plastic. Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging, dead batteries and old equipment.
