Register your product and get support at Clock Radio www.philips.
1 a f b g h i j k c d e l m n o 2 3
1 Important Safety a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
l Unplug this apparatus during lightning storms or when unused for long periods of time. m Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. n Apparatus shall not be exposed to dripping or splashing.
Notice This product complies with the radio interference requirements of the European Community. This product complies with the requirements of the following directives and guidelines: 2004/108/EC + 2006/95/EC Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Recycling Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
D Note • The type plate is located on the bottom of the apparatus.
2 Your clock radio Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this clock radio with mobile phone charger, you can: • enjoy the FM radio • know the time • wake up to favourite radio tone • set two alarms to ring at different time • charge a mobile phone of major brands.
c • d PRESET Select a preset radio station. ALARM 1 Set the alarm timer. View the alarm time. Turn on/off the alarm. • • • e REPEAT ALARM/BRIGHTNESS CONTROL Repeat the alarm. Adjust the display brightness. • • f SET TIME/AUTO SCAN Set the time and date. Scan radio stations. • • g PRESS TO OPEN Press to open the compartment. • h RADIO ON/OFF Switch radio on or off. • i TUNING+/Tune to a radio station. Adjust time and date. Select time format.
l VOL • Adjust volume. m ALARM 2 • Set the alarm timer. • View the alarm time. • Turn on/off the alarm.
3 Get started E Tip • Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
Adjust the volume level 1 Turn VOL to increase/decrease the volume level. Adjust display brightness 1 Press REPEAT ALARM/BRIGHTNESS CONTROL repeatedly to select different brightness levels of the display. Set time and date 1 Press RADIO ON/OFF repeatedly to turn off radio. 2 Press and hold SET TIME/AUTO SCAN for 2 seconds. » Year digits begin to blink. 3 Press TUNING+/- to set year. 4 Press SET TIME/AUTO SCAN to confirm. 5 Repeat steps 3-4 to set the month. 6 Repeat steps 3-4 to set the date.
4 Listen to radio Tune to a radio station 1 Press RADIO ON/OFF repeatedly to turn on radio. 2 Press TUNING+/- repeatedly to tune to a radio station. Program radio stations automatically D Note • You can program a maximum of 20 preset radio stations 1 Press RADIO ON/OFF repeatedly to turn on radio. 2 Press and hold SET TIME/AUTO SCAN for 2 seconds. » All available stations are programmed in the order of waveband reception strength. » The first programed radio station broadcasts automatically.
E Tip • To overwrite a programmed station, program another station in its place. Select a preset radio station 1 Press RADIO ON/OFF repeatedly to turn on radio. 2 Press PRESET to select a radio station.
5 Set the alarm timer You can set two separate alarms. For the alarm tone, you can select the FM radio, or the buzzer. 1 Before you start, ensure that the time is set correctly. 2 Press and hold ALARM 1/ALARM 2 for two seconds. » AL1 or AL2 is displayed and the hour digits and days begin to blink. 3 Switch ALARM 1 BUZZ/RADIO or ALARM 2 BUZZ/RADIO to buzz or radio to select alarm sound for alarm 1 and 2 respectively. 4 Press TUNING+/- repeatedly to set the hour. » appears and AL1 or AL2 begins to blink.
1 Press ALARM 1 or ALARM 2 repeatedly to turn on or off the alarm timer. » If the alarm timer is turned on, AL1 or AL2 appears. » If the alarm timer is turned off, disappears. Repeat alarm 1 When the alarm rings, press REPEAT ALARM/BRIGHTNESS CONTROL. » The alarm repeats ringing minutes later. E Tip • You can press TUNING+/- to adjust interval (5-15 minutes) to repeat alarm. Reset alarm 1 When the alarm rings, press SLEEP/ALARM RESET. » The alarm stops but the alarm settings remain.
6 Other features Set the sleep timer You can set the clock radio to turn off automatically after a certain period of time. 1 Press SLEEP/ALARM RESET repeatedly to select time (in minutes). » The apparatus turns off automatically after the set period of time. To turn off the sleep timer: 1 Press SLEEP/ALARM RESET repeatedly until [OFF] (off) appears or press RADIO ON/OFF. » is displayed when sleep timer is on and disappears when it is off.
2 Disconnect the charger adapter and save it in the compartment.
7 Product information D Tip • Product information is subject to change without prior notice. Specifications Tuner (FM) Tuning Range 87.
General information Power adapter Model: AS150-065-AN Philips Input: 100-240V~50/60 Hz, 0.7A Output: 6.5V DC, 2.3A Operation Power Consumption 20W Standby Power Consumption 0.5W Dimensions - Main Unit (W x H x D) 180 x 50 x 133 mm Weight - With Packing - Main Unit 0.725 kg 0.
8 Troubleshooting E Caution • Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www.philips.com/support). When you contact Philips, ensure that your apparatus is nearby and the model number and serial number are available.
Clock/timer setting erased • Power has been interrupted or the power plug has been disconnected. • Reset the clock/timer. Chareger does not charge the connected device • Make sure the USB cable is properly inserted into the device and the charger. • Make sure the adapter suits the connected device well. • Damaged USB cable or connector tip.Replace USB cable and/ or connector tip. • Wrong connector tip used. Check connector tip and replace if necessary. • Non supplied USB cable/connector tip used.
AUSTRALIA - Philips Manufacturers Warranty for Australia only These warranty conditions are valid for the following consumer electronics products: Colour Televisions, Projection TV, Plasma & LCD TV, Video Cassette Recorders, CD Recorders & Players, DVD Players, DVD Recorders, DVD Recorders with HDD, Audio Systems, Home Theatre systems, Digital Set Top Box & Portable Audio products.
© Royal Philips Electronics N.V. 2009 All rights reserved. Specifications are subject to change without notice.Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.
