English WHICH BUTTONS ARE WHERE? (D clock display with ALARM indicator (® HOURS button for seeing the hours {3 MINUTES button for setting the minutes & SLUMBER button to switch on slumber function ® REPEAT ALARM/ SLUMBER OFF button REPEAT ALARM fo switch off alarm temporarily SLUMBER OFF to switch off slumber function & TIME SET switch TIME to adjust time RUN ~ normal position ALARM 10 set alarm dime @ function switch RADII ON/OFF radio on/off ALARM RADIO/BUZZER alarm with radio or with buzzer ©® BANDS swit
CLOCK clock display adjusting the time The clock indicates the dime on the display. [n case of 12-hour clock system, the PM-indicator will light up {on=FM, off =AM} ‘The ALARM indicator comes on when you switch on the alarm. You can place the display upright and turn it to the desired position. # Set clock switch @ to TIME. » Set the correct time using the MINUTES () and HOURS () buttons. # Set clock swill (8 1o RUN.
SLUMBER slumber time slumber on slumber off F The clock radio has built-in slumber faction. This function enables auto fasten 1o the radio before you fall asleep. You wolf not have o switch off the clog radii yourself. This will take place automatically. The time you listen to the radio before you fall asleep is called slumber time. The slumber time is 59 minutes. # you wish to slumber, say out the following: # Press the SLUMBER ON bellybutton. The display will show thatyouhave a slumber time of 59 minutes.
MAINTENANCE = if you do not intend to use the clock radii for a dong time, iris beater to remove the plug from the wall socket. In addition to this, it is advisable to remove the battery from the clock radii. This will prevent any danger of leakage and the clock radio will not be damaged. Finger prints, dust and dirt on the clock radii shouts be removed using & clean and damp soft cloth or chamois feather.
