Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 2 Notice 3 3 Your clock radio 4 4 Get started 6 5 Listen to FM radio 7 6 Other features 8 Introduction What's in the box Overview of the clock radio Install battery Connect power Set time Tune to FM radio stations Store FM radio stations manually Select a preset radio station Adjust volume Set alarm timer Set sleep timer 4 4 5 6 6 6 7 7 7 7 8 8 7 Product information 10 8 Troubleshooting 11 Specifications 10 EN 1
1 Important • Warning •• Never remove the casing of this clock radio. •• Never lubricate any part of this clock radio. •• Never place this clock radio on other electrical equipment. •• Keep this clock radio away from direct sunlight, naked • • flames or heat. •• Make sure that you always have easy access to the power cord, plug or adaptor to disconnect the clock radio from the power. • • • • • • • • • • 2 Read these instructions. Heed all warnings. Follow all instructions.
2 Notice Any changes or modifications made to this device that are not expressly approved by Gibson Innovations may void the user’s authority to operate the equipment. Hereby, Gibson Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity on www.philips.com/ support.
3 Your clock radio Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/support. Introduction With this clock radio, you can • listen to FM radio; • set two alarms to ring at different time. What's in the box Check and identify the contents of your package. Always there to help you Register your product and get support at www.philips.
Overview of the clock radio a b c f d e a PRESET/SET TIME • Store radio stations in memory. • Select a preset radio station. • Set time. b RADIO ON/OFF • Press to turn on or off the radio. c HR/MIN/ TUNING • Tune to FM radio stations. • Set hour and minute. d SNOOZE/SLEEP • Snooze alarm. • Set the sleep timer. e Display panel • Display current status. f AL1/AL2/- VOLUME + • Set alarm. • Adjust volume.
4 Get started Note •• The type plate is located at the bottom of the clock radio. Always follow the instructions in this chapter in sequence. Install battery The batteries can only back up clock and alarm settings. Caution •• Risk of explosion! Keep the batteries away from heat, sunshine or fire. Never discard batteries in fire. •• The batteries contains chemical substances, so it should be disposed of properly. Insert 2 AAA batteries with correct polarity (+/-) as illustrated.
5 Listen to FM radio Note •• The tunning grid of the clock radio is 50KHz, the radio frequency on the display panel will increase 0.1MHz by pressing TUNING twice. Note •• Keep the clock radio away from other electronic Store FM radio stations manually devices to avoid radio interference. •• For better reception, fully extend and adjust the position of the FM antenna. You can store up to 10 FM radio stations. Tune to FM radio stations 1 2 1 3 2 3 Press RADIO ON/OFF to turn on the FM radio.
6 Other features Set alarm timer Select alarm source You can select FM radio or buzzer as the alarm source. »» The corresponding alarm icon lights up. Note •• The gentle wake-up function is designed for radio source only. Set alarm Note AL1 FM •• You can only set the alarm in standby mode. •• Make sure that you have set the clock correctly. Follow the illustration to set the first alarm. • AL1: set the first alarm. • AL2: set the second alarm.
Set sleep timer This clock radio can switch to standby mode automatically after a preset period. • Press SLEEPrepeatedly to select a period (in minutes). »» The clock radio switches to standby mode automatically after the preset period. To deactivate the sleep timer: • Press SLEEP repeatedly until [OFF] (off) appears.
7 Product information General information AC Power (power adapter) Note •• Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power 200mW RMS Tuner (FM) Tuning Range Tuning Grid Sensitivity - Mono, 26 dB S/N Ratio - Stereo, 46 dB S/N Ratio Total Harmonic Distortion Signal to Noise Ratio 10 EN 87.5-108 MHz 100 KHz <22 dBf <51.
8 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
Copyright © 2014 Gibson Innovations Limited. Revised Edition © 2017 This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. AJ3116_12_UM_V3.
