Register your product and get support at www.philips.
Contents 1 Important 3 2 Your Alarm Clock 4 3 Get started 4 4 Set alarm 6 5 Other features 8 6 Product information 9 What's in the box Connect power Set clock Select alarm source Set alarm for wake-up Set alarm for sleep Select system language Announce current time Guess time Adjust display brightness Specifications 4 4 5 6 6 7 8 8 8 9 9 7 Troubleshooting 10 8 Notice 10 EN 2
1 Important • • • • • • • • • • • • 3 Read these instructions. Heed all warnings. Follow all instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the alarm clock. Only use attachments/accessories specified by the manufacturer.
2 Your Alarm Clock 3 Get started Always follow the instructions in this chapter in sequence. What's in the box Connect power Check and identify the contents of your package. 11 12 Either AC power or batteries can be used as power supply of this alarm clock. 1 2 10 11 12 1 2 10 3 9 3 9 4 8 7 6 5 Option 1: Battery power 4 8 7 6 5 Caution •• Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.
Option 2: AC power Caution 5 6 •• Risk of product damage! Ensure that the power voltage Rotate - hr + or - min + to adjust the 12/24 hour format. Press SET TIME to confirm. »» The set time is displayed. corresponds to the voltage printed on the back or underside of the alarm clock. •• Risk of electric shock! When you unplug the AC adapter, always pull the plug from the socket. Never pull the cord. S E T T IM E S E T T IM E 2 sec. Note •• The type plate is located inside the battery compartment.
4 Set alarm 3 4 Select alarm source 5 Adjust / / to select different alarm sources: • : backlight is activated when alarm time comes. • : the selected sound is activated when alarm time comes. • : both backlight and sound are activated when alarm time comes.. 6 Rotate - min + to adjust the minute. Press SET WAKE to confirm. »» The sound source blinks. Rotate - hr + or - min + to select an alarm sound. Press SET WAKE to confirm. »» The alarm settings are displayed. SET WAKE SET WAKE 2 sec.
Activate/deactivate the alarm for wake-up 1 2 In standby mode, press SET WAKE. »» The preset alarm settings are displayed. SET SLEEP SET SLEEP 2 sec. Press SET WAKE repeatedly to activate or deactivate the alarm for wake-up. »» The alarm icon appears if the alarm is on and disappears if it is off. hr min SET SLEEP To stop the ringing alarm, press SET WAKE or alarm off/tell time. »» The alarm repeats ringing for the next day.
5 Other features Select system language Note •• Three languages are available for this alarm clock. Guess time This alarm clock is also designed to help a child learn to tell time. By asking children questions such as "What time is it", this alarm clock helps children become accustomed to using clocks. As a result, it contributes to their intellectual growth. 1 Adjust FRE/GER/ENG to select French, German, or English as your system language. 2 FRE GER 3 ENG Announce current time 4 Press .
Adjust display brightness Press BACKLIGHT repeatedly to select different brightness levels: • High brightness • Low brightness • Brightness off 6 Product information Note •• Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power 0.
7 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available. No power • Ensure that the power plug is connected properly.
correct disposal helps to prevent negative consequences for the environmental and human health. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company.
Specifications are subject to change without notice. 2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. AJ310_12_UM_V3.
