CD Clock Radio User manual Manuel d'utilisation Manual del usuario Gebruikershandleiding AJ130
1 1 2 6 7 3 4 5 8 % 9 ^ 0 & * ! @ # ( ) $
7 2 3 4 X PROG 5 6 SLEEP
English Controls Supplied accessory – 1 X certified AC/DC 9V adapter (Input: 100-240V ~ 50/60Hz 0.6A, Output: 9V 1.
Clock • Replace the battery once a year, or as often as necessary. Digital tuner 3 Press and hold TUNING ∞ or § until the frequency in the display starts running. ➜ The radio automatically tunes to a station of sufficient reception. 4 Repeat step 3 if necessary until you find the desired station. • To tune to a weak station, press TUNING ∞ or § briefly and repeatedly until you have found optimal reception. To view radio information, press DISPLAY.
CD Player Autostore Autostore automatically starts programming radio stations from preset 1. Any previous presets e.g. manually programmed will be erased. 1 Press and hold PROGRAM/SET TIME until the frequency in the display starts running. ➜ Available stations are programmed (FM). After all stations are stored, the first autostore preset station will then automatically play.
CD Player Alarm To erase a program, select any of the following. – Pressing 9 (twice during playback or once in the stop position); – Pressing POWER to standby; – Selecting TUNER or AUX. Selecting different play modes: REPEAT and SHUFFLE You can select and change the various play modes before or during playback, and combine REPEAT modes with program. SHUF – plays all tracks in random order.
Alarm Sleep/Auxiliary connection Switching off the alarm There are three ways of switching off the alarm. Unless you choose to cancel the alarm completely, the DAILY ALARM RESET option will be automatically kept activated from the time your alarm first goes off. 1 1 Daily alarm reset If you want the alarm to be stopped immediately but also wish to repeat the alarm call at the same time for the following day: During the alarm call, press once corresponding AL 1 or AL 2, or press POWER.
Safety and maintenance (See 7 ) Safety and general maintenance • • • • • • • • • • If you do not intend to use the CD clock radio for a long time, withdraw the power cord from the wall outlet. Place the set on a hard and flat surface so that the system does not tilt. Install the unit near the AC outlet and where the AC power plug can be easily reached. The apparatus shall not be exposed to dripping or splashing.
Troubleshooting If a fault occurs, first check the points listed below before taking the set for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service center. WARNING: Do not open the set as there is a risk of electric shock. Under no circumstances should you try to repair the set yourself, as this will invalidate the warranty. No sound. The alarm does not function. – Volume not adjusted. • Adjust the VOLUME. – • – • – CD playback does not work.
Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste.
English Meet Philips at the Internet http://www.philips.
