Register your product and get support at AJ1003 EN User manual
n a c m l k j b c d i h g f e
EN 1 Important Safety a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. m Battery usage CAUTION – To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit: • Install the battery correctly. • Remove the battery when the unit is not used for a long time. n Apparatus shall not be exposed to dripping or splashing. o Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles).
Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC.
2 Your clock radio Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this clock radio, you can: • enjoy the FM radio • know the time • wake up to buzz or favorite radio tone • set two alarms to ring at different time.
• Activate the alarm time setup. d / SOURCE • Turn on or off the unit. • Switch between FM radio play, MP3 link input, and clock time display. e - VOLUME + • Adjust the volume level of radio. f Battery compartment g FM ANT • Attached FM radio antenna. h DC 5V • Power supply socket. i MP3 LINK • Audio input jack (3.5 mm ) for an external audio device. j SLEEP • Set the sleep timer. k SET TIME/PROG • Activate the clock time setup. • Program radio stations.
3 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
3 Close the battery compartment. Connect power Caution •• Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the apparatus. •• Risk of electric shock! When you unplug the AC power adapter, always pull the plug from the socket. Never pull the cord. •• Before connecting the AC power adapter, ensure you have completed all other connections. 1 Connect the power adapter to • the DC IN (DC 5V) jack on the back of the main unit.
Set time and date 1 2 3 4 5 6 7 8 In clock mode, press and hold SET TIME/PROG for 2 seconds. Press PRESET +/PRESET -. »» 12-hour or 24-hour format is selected. Press SET TIME/PROG to confirm. »» The hour digits begin to blink. Repeat steps 2-3 to set the hour. Repeat steps 2-3 to set the minute. Repeat steps 2-3 to set the year. Repeat steps 2-3 to set the month. Repeat steps 2-3 to set the day. View the preset date 1 4 Press DATE repeatedly.
Program radio stations automatically Note •• You can program a maximum of 20 preset radio stations. 1 2 Press SOURCE repeatedly to turn on the radio. Press and hold SET TIME/PROG for 2 seconds. »» All available stations are programmed in the order of waveband reception strength. »» The first programed radio station broadcasts automatically. Program radio stations manually Note •• You can program a maximum of 20 preset radio stations. 1 2 3 4 5 6 Press SOURCE repeatedly to turn on the radio.
Tip •• To overwrite a programmed station, program another station in its place. Select a preset radio station 1 2 5 Press SOURCE repeatedly to turn on radio. Press PRESET +/PRESET - to select a radio station. Set the alarm timer Set the alarm time You can set two separate alarms. Note •• Before you start, ensure that the clock time is set correctly. 1 2 3 4 5 Press and hold AL1 (or AL2) for 2 seconds. Press PRESET +/PRESET -. »» The alarm tone is selected. •• FM: The preset radio station.
6 Repeat steps 2-3 to set the volume level (32 maximum) of alarm tone. Turn on/off the alarm timer Note •• Ensure that you already set the alarms successfully. 1 Press AL1 or AL2 twice. »» If the alarm timer is turned on, »» If the alarm timer is turned off, or or appears. disappears. View the alarm settings 1 Press AL1/AL2. Repeat alarm 1 When the alarm rings, press REPEAT ALARM/BRIGHTNESS CONTROL. »» The alarm repeats ringing 9 minutes later.
6 Other features Set the sleep timer You can set the radio to turn off automatically after a certain period of time. 1 Press SLEEP repeatedly to select a preset period of time. »» appears. »» The volume decreases gradually in the last 5 minutes. To turn off the sleep timer: 1 Press SLEEP repeatedly until (off ) appears. »» disappears. Adjust display brightness 1 Press REPEAT ALARM/BRIGHTNESS CONTROL repeatedly. Listen to an external device You can use this unit to play audio from an external device.
7 Product information Note •• Product information is subject to change without prior notice. Specifications Tuner (FM) Tuning Range 87.5 - 108MHz Sensitivity - Mono, 26dB S/N Ratio <22 dBf Search Selectivity >28dBf Total Harmonic Distortion <3% Signal to Noise Ratio >50dB General information AC Power Input: 220 - 230 V, 50 Hz Operation Power Consumption 4.0 W Dimensions - Main Unit (W x H x D) 185 x 52 x 85 mm Weight - With Packing - Main Unit 0.56 kg 0.
8 Troubleshooting Caution •• Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www.philips.com/support). When you contact Philips, ensure that your apparatus is nearby and the model number and serial number are available.
•• •• •• Replace the battery. Power has been interrupted or the power plug has been disconnected. Reset the clock/timer.
© 2010 Koninklijke Philips Electronics N.V. All rights reserved. AJ1003_12_UM_V2.
