User manual

5EN
• If your Bluetooth device has been
paired with the Bluetooth adapter
before, press
.
» The Bluetooth adapter attempts to
connect the previously connected
Bluetooth device. If it fails, the adapter
returns to the pairing mode.
Tip
•
If the Bluetooth adapter fails to pair with a Bluetooth
device, the Bluetooth adapter exits the pairing mode
in 2 minutes, and the LED light becomes dim. You can
press
to return to pairing mode.
LED indications Description
Solid blue The Bluetooth adapter and
your Bluetooth-enabled
device are connected.
Flashing blue The Bluetooth adapter is
waiting to be paired with a
Bluetooth-enabled device.
Dim light The Bluetooth adapter is
neither in connection with a
Bluetooth device nor in the
pairing mode.
Play from Bluetooth-enabled
devices
Note
•
The effective operating range between the Bluetooth
adapter and the paired device is approximately 10
meters (30 feet).
• Keep this Bluetooth adapter away from other electronic
devices that may cause interference.
• Compatibility with all Bluetooth devices is not
guaranteed.
• Make sure that the Bluetooth adapter is connected to
the powered Hi-Fi system correctly.
• Make sure that your Hi-Fi system is in Audio-in or
line-in mode.
1 On your Bluetooth device, turn on
Bluetooth function and search for
Bluetooth devices (refer to the device's
user manual).
2 When [PhilipsBT] (Philips Bluetooth
adapter) is displayed on your device,
select it to start pairing and connection. If
necessary, enter default password “0000”.
» If connection is successful, the
Bluetooth indicator becomes solid
blue.
3 Play audio on your device.
» Audio streams from your device to
your Hi-Fi system.
Note
•
If your Bluetooth device has been paired with AEA2000
before,youjustneedtondout[PhilipsBT] on your
Bluetooth menu, then start the connection.
• This Bluetooth adaptor can memorize up to 8
previously paired devices.
To disconnect the Bluetooth-enabled device:
• Press
again;
• Tap [PhilipsBT] on the Bluetooth menu
again;
• Deactivate Bluetooth function on your
device; or
• Move the device beyond the
communication range.
To connect another Bluetooth device:
1 Disconnect the previously connected
device.
2 Pair with your selected Bluetooth device.
To clear pairing history in the Bluetooth
adapter:
Press and hold
for 7 seconds.
» The Bluetooth indicator stays in solid
blue for 2 seconds, then returns to the
previous status.