User manual

11
English
• to select the preset station 6 - 10, press
and hold 5+, then press another keypad
simultaneously (e.g. 5+ with 1for6).
Use FM menu
1 In FM mode, press MENU to access FM
menu.
2 Rotate TUNING to scroll the menu
options:
• [Scan setting]
• [Stereo setting]
• [System]
3 To select an option, press SELECT.
4 Repeat steps 2-3 if sub-option is available
under one option.
Scan setting
• [Strong stations only]: scan stations with
strong signals only.
• [All stations]: scan all the available radio
stations.
Stereo setting
• [Stereo allowed]: select stereo broadcast.
• [Forced mono]: select mono broadcast.
Show RDS information
RDS(RadioDataSystem)isaservice
that allows FM stations to show additional
information.
If you listen to an FM station with RDS signal, a
RDS icon and the station name are displayed.
1 Tune to a RDS station.
2 Press INFO repeatedly to scroll through
thefollowinginformation(ifavailable):
» Station name
» Program type such as [NEWS](news),
[SPORT](sport),[POP M] (pop
music)...
» Radio text messages
» Frequency
Listen to FM radio
Select FM mode
1 Press to turn on the radio.
2 Press DAB/FM repeatedly to select FM
mode.
Tune to FM radio stations
In FM tuner mode, rotate TUNING slowly to
tune to FM radio stations with strong signal.
Store FM radio stations automatically
Note
• You can store up to 10 FM radio stations.
In FM tuner mode, press SCAN.
» The unit stores all the available FM radio
stationsandbroadcaststherststation.
Store FM radio stations manually
1 Tune to an FM radio station.
2 Press and hold PRESET for 3 seconds to
activate storing mode.
3 Rotate TUNING to select a number.
4 Press SELECTtoconrm.
5 Repeat steps 1 - 4 to store more FM
stations.
Tip
• To overwrite a preset station, store another station in
its place.
Select a preset FM radio station
In FM tuner mode,
• to select the preset station 1 - 5, press the
numeric keypad 1 - 5 directly;
Use system menu in FM/
DAB+ mode
Reset all the settings
1 In DAB+/FM mode, press MENU.
2 Rotate TUNING until [System] (system)is
displayed.
3 Press SELECTtoconrm.
» [Factory Reset] (factoryreset)is
displayed.
4 Press SELECT again.
» [No] [Yes] is displayed.
5 Rotate TUNING to select [Yes] or [No],
then press SELECTtoconrm.
• [Yes]: reset all the settings to factory
default.
• [No]: cancel.
Update software (if available)
Software upgrade for your radio may be
available in future. If you register your product
atPhilipswebsite(www.philips.com/welcome)
with a valid email address, you may receive
softwareupdatenotication.Oryoucan
visit Philips website constantly to check if the
updating information is provided.
To update software of your radio, follow these
steps strictly:
1 Read software update instructions on
Philips website carefully.
2 Download the latest software to your PC,
then connect it to your radio via USB port.
3 In FM/DAB+ mode, enter the system
menu.
4 Rotate TUNING until [Software Upgrade]
(softwareupgrade)isdisplayed.
5 Press SELECTtoconrm.
6 Follow the instructions on the screen to
complete upgrade.
EN